55" V-BELT
Type "A" v-belt
1/2" wide
5/16" thick
For Fractional Horsepower motors
6555 55 IN. V-BELT
SIZE:55"
COLOR:Black
|
C15000-2 240V COOLER PUMP
|
5/8" PILLOW BLOCK
Pillow Block Bearing
5/8"
Bearing
Low Rise
Bearing ball and Cushion
6634 5/8 IN. PILL BLOCK BEARING
SIZE:5/8"
COLOR:Silver
|
Tripp Lite AC UNIT FOR SERVER RACKS 8U - An Ideal Investment for Keeping Your Rack Equipment Cool and in Reliable Working Condition This rack-mount air conditioning unit pumps 7 000 BTU/h (2.0 kW) of close-coupled cooling into your IT equipment to prevent shutdowns malfunctions and other failures caused by overheating and fluctuating temperatures. The SRXCOOL7KRM solves your heat-related problems without requiring the heavy costs of new construction time-consuming maintenance or installation specialists. Saves Valuable Floor Space in Your IT Environment The self-contained SRXCOOL7KRM chassis mounts in 8U of space at the bottom of an EIA-standard rack enclosure to save floor space in a small-to-medium-sized data center server room or network closet. A directional output vent aims the air upward directly at rack equipment. Quiet Efficient Close-Coupled Cooling Ensures the Cool Air Goes Where Most Needed A magnetic air dam attached to the front door of the rack enclosure makes sure your rack equipment draws cool air from the SRXCOOL7KRM rather than drawing warm air from the room. Because it only cools the equipment inside the rack enclosure the SRXCOOL7KRM is much more efficient than solutions that cool an entire room to achieve the same result. The SRXCOOL7KRM also filters the air and its built-in evaporator eliminates condensation with no floor drain or water collection tank needed. The unit operates quietly?about the noise level of an average office setting. Designed for Easy and Convenient Operation The intuitive control panel includes a dual-digit LCD that displays the current temperature in real time. Pushbuttons and diagnostic LEDs communicate vital operating conditions at a glance. The SRXCOOL7KRM restarts automatically after power failures and you can set the built-in timer to schedule unattended shutdowns and startups. The 1.8-meter (6-foot) 18 AWG power cord is not terminated with a plug. You are responsible for providing and installing the appropriate plug that complies with local wiring and safety regulations. Optional Network Interface Offers 24/7 Access The optional SRCOOLNET2LX remote management accessory (sold separately) allows you to monitor temperatures receive alerts review logs and control settings over an Ethernet network from any location via SNMP Web SSH or telnet. SRCOOLNET2LX also includes an ENVIROSENSE temperature and humidity sensor that lets you link cooling output with temperature readings up to 12 feet away. In addition the optional SRCOOL7KDUCT exhaust duct kit (sold separately) directs and disperses heat through an upper vent into your facility's ventilation system.
|
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
| Garrison Air Conditioner wall sleeve | Dimensions: 26" W x 15-3/5" H x 16-9/10" D | Minimal Assembly Required
|
| Lightweight concrete pad | Weight comparable to plastic | Strengthened by fiber reinforcement to flex instead of cracking or breaking | Textured surface prevents unit slide and allows drainage | Unaffected by soil conditions, UV, temperature extremes, and other weather conditions
|
| Mini-split installation kit | 16 ft. piping kit | 18 ft. connecting wire (for 12K, 18K units)
|
Standard Features: | Suitable for use with R-410A and R-22 refrigerants |Rust-resistant, thermoplastic drain pans feature a low water-retention design | Check flowrater expansion device for heat pump or cooling-only applications | AHRI Certified; ETL Listed | Cased Coil Cabinet Features:|Foil-face insulation | Galvanized-steel, leather-grain finish | Architectural Gray paint finish
|
Goodman OEM inducer blower
|
Lightweight concrete pad. Weight comparable to plastic. Strengthened by fiber reinforcement to flex instead of cracking or breaking. Textured surface prevents unit slide and allows drainage. Unaffected by soil conditions, UV, temperature extremes and other weather conditions. Size: 24" x 36" x 2". Min. Order: 1 EA
|
|Universal packaged terminal wall sleeve|Standard 42 IN|Foldable|Easy to install
|
Energy saving; White; 3 per bag; Does not include register; 5" x 12"
|
Pre-tested, pre-wired heat kits 1 phase models. Featuring: electric heat limit control, rust resistant nickel chromium heating elements. For rooftop or ground-level horizontal installation and applications. Approved for manufactured or modular homes. KW: 5, no circuit breaker included. Min. Order: 1 EA
|
WINDOW AIR CONDITIONER COVER
Durable polyethylene blocks out elements
Blocks out water, ice, dust & leaves
Elastic strap secures cover to unit
Size denotes W x L x H
03392 18X27X16 WINDOW AC COVER
SIZE:18"x27"x16"
UNIT/TYPE:Window/10M BTU
|
| Package terminal exterior aluminum grille
|
| Lightweight concrete pad | Weight comparable to plastic | Strengthened by fiber reinforcement to flex instead of cracking or breaking | Textured surface prevents unit slide and allows drainage | Unaffected by soil conditions, UV, temperature extremes, and other weather conditions
|
This is a plastic platform that the condensing unit or heat pump in the yard sits on. Solidly manufactured of 3 inch UV resistant plastic. | Pad size: 32" x 32" | Rugged design provides uniform and generous ribbing for optimum, self-leveling ground support without inserts | Lightweight and unaffected by UV or weather | Texture to prevent unit sliding | Classic appearance with rounded edges and concrete gray color | Drillable for securing unit
|
This is a plastic platform that the condensing unit or heat pump in the yard sits on. Solidly manufactured of 3 inch UV resistant plastic. | Pad size: 24" x 36" | Rugged design provides uniform and generous ribbing for optimum, self-leveling ground support without inserts | Lightweight and unaffected by UV or weather | Texture to prevent unit sliding | Classic appearance with rounded edges and concrete gray color | Drillable for securing unit
|
This is a plastic platform that the condensing unit or heat pump in the yard sits on. Solidly manufactured of 2 inch UV resistant plastic. | Pad size: 36" x 36" | Rugged design provides uniform and generous ribbing for optimum, self-leveling ground support without inserts | Lightweight and unaffected by UV or weather | Texture to prevent unit sliding | Classic appearance with rounded edges and concrete gray color | Drillable for securing unit
|
Flexible sheet seals metal register vents to help improve heating or cooling efficiency. Can be painted, stenciled or wall papered to match decor. Easily cut to fit vent size. Size: 8"W x 15"L. 3-Pack.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
| Lightweight concrete pad | Weight comparable to plastic | Strengthened by fiber reinforcement to flex instead of cracking or breaking | Textured surface prevents unit slide and allows drainage | Unaffected by soil conditions, UV, temperature extremes, and other weather conditions
|
Pre-tested, pre-wired heat kits 1 phase models. Featuring: electric heat limit control, rust resistant nickel chromium heating elements. For rooftop or ground-level horizontal installation and applications. Approved for manufactured or modular homes. KW: 10, no circuit breaker included. Min. Order: 1 EA
|
Lightweight concrete pad. Weight comparable to plastic. Strengthened by fiber reinforcement to flex instead of cracking or breaking. Textured surface prevents unit slide and allows drainage. Unaffected by soil conditions, UV, temperature extremes and other weather conditions. Size: 24" x 24" x 2". Min. Order: 1 EA
|
Lightweight Concrete Pad. Weight Comparable To Plastic. Strengthened By Fiber Reinforcement To Flex Instead Of Cracking Or Breaking. Textured Surface Prevents Unit Slide And Allows Drainage. Unaffected By Soil Conditions, Uv, Temperature Extremes
|
Lightweight Concrete Pad. Weight Comparable To Plastic. Strengthened By Fiber Reinforcement To Flex Instead Of Cracking Or Breaking. Textured Surface Prevents Unit Slide And Allows Drainage. Unaffected By Soil Conditions, Uv, Temperature Extremes
|
Standard Features: | Suitable for use with R-410A and R-22 refrigerants |Rust-resistant, thermoplastic drain pans feature a low water-retention design | Check flowrater expansion device for heat pump or cooling-only applications | AHRI Certified; ETL Listed | Cased Coil Cabinet Features:|Foil-face insulation | Galvanized-steel, leather-grain finish | Architectural Gray paint finish
|
The LG AXSVA4 is a combination of the AXSVA1 26 In. Wall Sleeve and AXRGALA01 Stamped Aluminum Rear Grille for Through-the-Wall Air Conditioners. The 26-inch wall sleeve should be securely fastened within a wall opening before installing the air conditioner. The sleeve helps bear the weight of the air conditioner while keeping it insulated and safe from dust, bugs and other debris that could get sucked into it. Inclement weather, corrosion, and any other elements cannot match the protective power of this metal sleeve. The stamped aluminum rear grille is generally used to prevent damage to the back outer coils of the air conditioner and for keeping birds and small animals from nesting in the wall sleeve.26-inch wall sleeve (AXSVA1) and stamped aluminum rear grille (AXRGALA01) for through-the-wall air conditioners|Install wall sleeve in pre-cast concrete or masonary walls|Wall sleeve to be securely fastened to wall opening before installing air conditioner|Wall sleeve helps bear the weight of the air conditioner|Wall sleeve helps insulate the air conditioner|Wall sleeve protects the air conditioner from dust, bugs and other debris that could get sucked into it|Wall sleeves all metal construction withstands inclement weather, corrosion and other elements|Stamped aluminum rear grille prevents damage to the back outer coils of unit|Stamped aluminum rear grille prevents birds and small animals from nesting in the wall sleeve|
lg| electronics| axsva4| axsva1| axrgala01| thru-the-wall| through-the-wall| thru| through| the| wall| sleeve| stamped| aluminum| rear| grille| ac| a/
Package Contents: wall sleeve|grille|installation instructions/manual|warranty
This item cannot be shipped to APO/FPO addresses
|
| Galvanized steel wall sleeve with expanded polystyrene foam insulation | Welded and protected with baked on enamel | Welded areas are protected with a sealing compound to prevent rust | Accepts all Zoneline chassis models | Add 1/4" to width and height for wall cutout size
|
Plastic liner stops drafts, keeps out dust and dirt. Fabric cover is machine washable. Includes one cover, one liner, and installation tape.
Wdth x Ht In=28 x 20
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
This is a plastic platform that the condensing unit or heat pump in the yard sits on. Solidly manufactured of 3 inch UV resistant plastic. | Pad size: 24" x 24" | Rugged design provides uniform and generous ribbing for optimum, self-leveling ground support without inserts | Lightweight and unaffected by UV or weather | Texture to prevent unit sliding | Classic appearance with rounded edges and concrete gray color | Drillable for securing unit
|
This is a plastic platform that the condensing unit or heat pump in the yard sits on. Solidly manufactured of 2 inch UV resistant plastic. | Pad size: 30" x 30" | Rugged design provides uniform and generous ribbing for optimum, self-leveling ground support without inserts | Lightweight and unaffected by UV or weather | Texture to prevent unit sliding | Classic appearance with rounded edges and concrete gray color | Drillable for securing unit
|
|
|
|
|
Copyright © 1999-2021 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |