Connects two pieces of DuraFlex together or to connect DuraFlex to a fireplace insert (pop rivets).
|
Collarplate with built-in clamp but with a formed bottom plate to anchor into the sides of the tile.
|
| Compressed Lengths For Easy Transport | Lightweight, Flexible, Corrosion Resistant
|
| Compressed Lengths For Easy Transport | Lightweight, Flexible, Corrosion Resistant
|
EPA335KT Stainless Steel Low Clearance Adapter (Insert Boot 6" ID Collar)
|
This RoVac Three-Motor Vacuum comes with three motors that allow you to increase airflow depending on your job. Lots of chimney professionals think this is the best all-purpose vacuum ever. At its maximum performance, it can move air at the rate of 405 cf
|
These reusable steel forms work great on all masonry chimneys. The slanted crown form (pictured), angled at 8+, is 5.5" deep and will create crowns from 10"+10" up to 56" + 56". The straight-sided forms (not pictured) are also 5.5" deep. With them you can
|
Use with 3" - 6" Flex
ArmorMesh is required as part of a HomeSaver UL Listed installation. This 304 stainless woven wire mesh wraps the blanket insulation and holds it close to the pipe. ArmorMesh also makes FlexWrap highly resistant to tearing during |
Ultimate Ridge Hooks are a pair of reversible, adjustable, steel "hinges" that straddle the roof ridge and allow you to attach your roof staging to 2" x 8" "legs". They provide a nailing base for your chimney or roof brackets. These "ladderless" ridge hoo
|
Collarplate with built-in clamp but with a formed bottom plate to anchor into the sides of the tile.
|
The Masonry doors are designed to be mortared into a masonry opening. To open just lift up on the door and pull out.
Large masonry: masonry opening 11-5/8"+15-5/8"; access opening 6-3/4"+10-1/4" |
Collarplate with build-in clamp. Raised to add strength and shed water.
|
3" PelletVent Pro Flashing DSA Aluminum, 7/12 - 12/12
|
Collarplate with build-in clamp. Raised to add strength and shed water.
|
HomeSaver Fireplace Liner Sizing Guide
|
Use with 10" - 16" Flex, Large Oval, 12" x 12" FirePlaceFlex
ArmorMesh is required as part of a HomeSaver UL Listed installation. This 304 stainless woven wire mesh wraps the blanket insulation and holds it close to the pipe. ArmorMesh also makes Flex |
DuraTech sets the standard in performance. The ThermalTech blanket insulation in the lengths, elbows, and tees eliminates hot spots + no shifting, settling, or voids. In the event of a creosote fire, this insulation lets the chimney liner expand outward a
|
21-ga., 1 lb. can, approximately 366'.
|
The Lock-Top II comes fully assembled. Its base mounts to the included sweep+s ring which attaches to the flue tile with silicone sealant (included). A 30' stainless steel cable and hardware are also included. All Lock-Top II cap/dampers have an overall h
|
Use with 7" - 9" Flex, Small OvalFlex, RectangleFlex, 8" x 12" FirePlaceFlex
ArmorMesh is required as part of a HomeSaver UL Listed installation. This 304 stainless woven wire mesh wraps the blanket insulation and holds it close to the pipe. ArmorMesh |
Includes Cap, Top Plate, and Masonry Sleeve
|
Use with 3" - 6" Flex
ArmorMesh is required as part of a HomeSaver UL Listed installation. This 304 stainless woven wire mesh wraps the blanket insulation and holds it close to the pipe. ArmorMesh also makes FlexWrap highly resistant to tearing during |
Collarplate with built-in clamp but with a formed bottom plate to anchor into the sides of the tile.
|
RS adaptors are not for use with air-insulated factory-built chimneys. We can have an adaptor custom fabricated forair-insulated chimneys.
8" x 8" Lock-Top Damper Required |
This ingenious device will cure most smoking problems resulting from a flue sized too small for the fireplace opening. The smoke guard can be used to reduce the height or width of the fireplace, making the ratio of the fireplace opening to flue size more
|
Collarplate with build-in clamp. Raised to add strength and shed water.
|
RS adaptors are not for use with air-insulated factory-built chimneys. We can have an adaptor custom fabricated forair-insulated chimneys.
8" x 8" Lock-Top Damper Required |
Use with 3" - 6" Flex
ArmorMesh is required as part of a HomeSaver UL Listed installation. This 304 stainless woven wire mesh wraps the blanket insulation and holds it close to the pipe. ArmorMesh also makes FlexWrap highly resistant to tearing during |
The Masonry doors are designed to be mortared into a masonry opening. To open just lift up on the door and pull out.
Small masonry: masonry opening 7-1/2"+10-1/2"; access opening 5-1/8"+7" |
Includes Cap, Top Plate, and Masonry Sleeve
|
This ingenious device will cure most smoking problems resulting from a flue sized too small for the fireplace opening. The smoke guard can be used to reduce the height or width of the fireplace, making the ratio of the fireplace opening to flue size more
|
Listed below are one black hearth extender and four sizes of black stove boards. All will protect your customers+ floors or walls from the intense heat, hot coals, ashes, and soot that woodstoves can produce. The embossed pebble-finish steel resists scrat
|
|
|
|
|
Copyright © 1999-2021 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |