In-Line Non-return Valve
Non-return valves help priming and prevent backflow of water into the bilge.
|
Y-Valve
The Jabsco Y-Valve is designed to provide flexibility of onboard waste management by diverting waste either into an onboard holding tank or directly overboard where legal to do so. Check local and Federal regulations to determine where direct overboard discharge of untreated waste is permitted. No overboard discharge of untreated waste is allowed within three miles of shore. Some near shore areas and inland areas are designated as "No-Discharge Zones" where the discharge of any onboard waste, even treated waste is strictly prohibited. Many of these areas require a waste retention system that can be positively secured in an onboard retention mode. The Jabsco Y- Valve accommodates this requirement by providing the ability to add a padlock that secures the selector handle in either direction to ensure waste is directed to an onboard holding tank. The Y-Valve may also be used to direct waste from a holding tank to an onboard waste discharge pump for holding tank evacuation or, alternatively, to a waste deck plate for removal by a shoreside pump-out facility. The Y- Valve may also be used in a bilge pumping system to select between two separate bilge pickups in different bilge compartments providing for evacuation of two separate bilge areas with only one bilge pump. Features:
|
Electric Conversions
Features:
|
Commercial Duty Water Puppy
Flow rate: 34 litres/min (9 USgallons/min) Self-priming from dry up to 1.2m (4ft) Features:
Motor Permanent magnet type, fully enclosed, stainless steel shaft, ball type shaft bearing, has adequate torque to reverse the pump Port Type 1/2" Internal Pipe Threads 1" External Hose Barb Adapter for 3/4 " External Garden Hose Thread included
|
Commercial Duty Water Puppy
Flow rate: 34 litres/min (9 USgallons/min) Self-priming from dry up to 1.2m (4ft) Features:
Motor Permanent magnet type, fully enclosed, stainless steel shaft, ball type shaft bearing, has adequate torque to reverse the pump Port Type 1/2" Internal Pipe Threads 1" External Hose Barb Adapter for 3/4 " External Garden Hose Thread included
|
Ballast Pump
Today's Wakeboard and Ski tow boats need to be able to take on water ballast to modify their wake formation. A development of our tried and tested Puppy Pumps lets these specialist craft rapidly take on and dump ballast, while modern electronics guard against dry running damage to the impeller The choice of motor boat builders for ski and wakeboard ballast systems.
Ports
|
Our Tornado Pumps are ideal for general pond and waterfall use, as they are designed for a wide range of functions as well as providing tremendous flexibility. It may be used in waterfalls, fountains, filtration systems and specials applications. They feature an oil-free magnetic-driven, epoxy-protected ceramic shaft and a ceramic impeller for long life. These reliable and quiet underwater pumps will give you a cost-saving, energy-efficient operation.
|
|
|
Our hurricane pumps are ideal for heavy duty waterfall or filter systems, as they have the needed power to force large quantities of water through long or high pipe runs, or through restrictive UVC's and filters. They are designed for continuous operation, even in the harshest pond environments. They feature an oil-free magnetic-driven, epoxy-protected ceramic shaft and a ceramic impeller for long life. These reliable and quiet underwater pumps will give you a cost-saving, energy-efficient operation.
|
This item can NOT be shipped to these states CA
2 HP THERMOPLASTIC SPRINKLER PUMP Corrosion-resistant, self priming sprinkler pump Rugged, heavy-duty fiberglass-reinforced - thermoplastic housing Capable of operating up to 30 sprinkler heads Maximum lift: 25 ft. - maximum capacity 69 GPM Flow at 10 ft. lift & 30 PSI: 45 GPM Suction & discharge pipe size: 2" NPT 230V / 115V dual voltage - UL & CSA Listed FP5182 2HP SPRINKLER PUMP SIZE:2 HP COLOR:Black |
Hayward Pump. 110 Or 230 Volt. Hp: 1-1/2.
|
|
|
Hayward Pump. 110 Or 230 Volt. Hp: 1.
|
The Powerhead pumps feature flow control, an oil free magnetic design, are epoxy protected and have ceramic impeller shafts for long life. These reliable and quiet submersible water pumps will give you a cost-saving, energy-efficient operation.
|
|
|
|
Our hurricane pumps are ideal for heavy duty waterfall or filter systems, as they have the needed power to force large quantities of water through long or high pipe runs, or through restrictive UVC's and filters. They are designed for continuous operation, even in the harshest pond environments. They feature an oil-free magnetic-driven, epoxy-protected ceramic shaft and a ceramic impeller for long life. These reliable and quiet underwater pumps will give you a cost-saving, energy-efficient operation.
|
|
|
|
This item can NOT be shipped to these states CA
1-1/2 HP IN-GROUND POOL PUMP High-flow pump with integral trap for use with - in-ground swimming pools up to 53,800 gallons Corrosion resistant thermoplastic housing Includes quick connection unions, extra-large - capacity trap-basket with see-thru lid Maximum capacity: 112 GPM - Maximum lift: 8 ft. Max PSI: 32 PSI - adjustable dual 115/230 volts Special designed base dampens sound & vibration AT251501 1-1/2HP POOL PUMP SIZE:1-1/2 HP COLOR:BlackFor Specs see www.flotecpump.com |
The Powerhead pumps feature flow control, an oil free magnetic design, are epoxy protected and have ceramic impeller shafts for long life. These reliable and quiet submersible water pumps will give you a cost-saving, energy-efficient operation.
|
This item can NOT be shipped to these states CA
1 HP IN-GROUND POOL PUMP High-flow pump with integral trap for use with - in-ground swimming pools up to 43,200 gallons Corrosion resistant thermoplastic housing Includes quick connection unions, extra-large - capacity trap-basket with see-thru lid Maximum capacity: 86 GPM - Maximum lift: 8 ft. Max PSI: 28 PSI - adjustable dual 115/230 volts Special designed base dampens sound & vibration AT251001 1HP POOL PUMP SIZE:1 HP COLOR:BlackFor Specs see www.flotecpump.com |
|
|
|
|
|
|
|
|
|
|
Copyright © 1999-2021 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |