Sikaflex® 292i Marine Structural Bonding Compnent 10.3oz(300ml) Cartridge - White

Sikaflex-292i is a non-sag one component polyurethane adhesive of thixotropic, paste-like consistency which cures on exposure to atmospheric moisture to form a durable elastomer. Sikaflex-292i exhibits excellent adhesive properties and a high degree of mechanical strength. Sikaflex-292i meets the low spread of flame requirements set out by the International Maritime Organization (IMO).

Uses:
Sikaflex®-292i is suitable for structural joints in marine constructions which will be subjected to high dynamic stresses. Suitable to bond metals, particularly aluminum (including anodized finishes), metal primers and paint coatings (2-c systems), or ceramic materials, plastics such as GRP (unsaturated polyester resin), ABS, etc.

Characteristics & Advantages:

• Very Low VOC according to US EPA Method 24
• No added solvents
• Can be over-painted
• Capable of withstanding high dynamic stresses
• Vibration-damping
• Non-corrosive, Electrically non-conductive

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Sikasil® N PLUS - White - 3oz

Features:

• Bonds well to most substrates
• Fungicide additive for mildew resistance
• Excellent flexibility for dynamic joint movement
• Extremely long service life
• All season ease of application

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SikaBiresin® AP077 + BPO Cream Hardener - White - Quart

Features:

• Gelcoat repair system
• Easy to apply – Easy to sand
• High heat-resistance of 400°F (209°C)
• Accepts virtually all types of finishes
• Low moisture absorption for above or below the waterline applications
• Minimal shrink or sink upon cure
• Bonds to epoxy, vinyl ester, polyester, and many substrates
• Quick-set cure and finishing time

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SikaBiresin® AP861-1 - Light Brown - Quart

Applications:

• Compatible with fiberglass, wood, aluminum, steel marine vessels

Features:

• Fairing compound system
• Can be applied up to 1” thick without sagging or shrinking during cure
• Color coded positive mix indication
• Smooth, creamy paste mixes easily and trowels smoothly
• 0% VOC’s (volatile organic compounds)
• Can be used above or below the waterline
• Convenient 1:1 volumetric mix ratio
• Water resistant for above or below the waterline applications

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SikaBiresin® AP861 - White - Quart

Applications:

• Compatible with fiberglass, wood, aluminum, steel marine vessels

Features:

• Fairing compound system
• Can be applied up to 1” thick without sagging or shrinking during cure
• Color coded positive mix indication
• Smooth, creamy paste mixes easily and trowels smoothly
• 0% VOC’s (volatile organic compounds)
• Can be used above or below the waterline
• Convenient 1:1 volumetric mix ratio
• Water resistant for above or below the waterline applications

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

High Strength Threadlocker RED Gel Squeeze

OEM specified. Gel formula provides “liquid-reliability” without drips, globs, mess or waste. Available in three convenient sizes, the GEL TWIST™ pin-point applicator, the GEL SQUEEZE™ applicator, or the single-use pouch puts the Threadlocker right where you want it…on the part! High strength threadlocker for heavy-duty applications 3/8 inch to 1 inch (10mm to 25mm). Especially well-suited for permanently locking studs and press fits. Adds 3,000 PSI holding power on slip and press fit assemblies. Replaces set screws and snap rings. Locks against vibration loosening. May require heat or special tools for removal. Conforms to ASTM D5363 AN0221 (Mil-S-46163A, Type I, Grade K). 

Applications:

• Automobile - Suggested Applications: Cylinder block and rocker arm studs, ring gear bolts, frame bolts, shock absorber bolts; also ideal for vertical applications
• Heavy Duty - Suggested Applications: Cap screws and mounting studs on differentials

Directions:

Parts should be clean and oil free.

1. Remove protective cap.
2. Turn dial to expose 1/8″ to 1/4″ of material beyond tip.
3. Apply threadlocker to leading edge of male fitting,covering 5 to 6 threads. Avoid direct contact of tip to metal surface*.
4. Assemble parts and tighten to recommended torque.
5. Replace protective cap.*If contact occurs, expose 1/16” of material and wipe off with a clean towel.Temperature range: -65°F to 300°F (-54°C to 150°C).Refer to Technical Data Sheet for complete information.

NOTE: Permatex® Threadlocker Gel should not be used on plastic fittings. Do not use on food contact surfaces.Avoid food contamination during use and storage.

High Strength Threadlocker RED Bottle - 36ml

OEM specified. High strength threadlocker for heavy-duty applications 3/8 inch to 1 inch (10mm to 25mm). Especially well-suited for permanently locking studs and press fits. Adds 3,000 PSI holding power on slip and press fit assemblies. Replaces set screws and snap rings. Locks against vibration loosening. May require heat or special tools for removal. Conforms to ASTM D5363 AN0221 (Mil-S- 46163A, Type I, Grade K). 

Applications:

• Automobile - Suggested Applications: Cylinder block and rocker arm studs, ring gear bolts, frame bolts, shock absorber bolts
• Motorcycle - Suggested Applications: All engine mounting bolts
• Heavy Duty - Suggested Applications: Air starter fasteners, suspension fasteners, shock absorber mounts, wheel studs, exhaust system mounts, bumper fasteners
• Marine - Suggested Applications: Cylinder block studs, ring gear bolts, frame bolts, shock bolts

Directions:

1. Clean and dry parts using Permatex® Surface Prep™activator.
2. Apply to both parts (threaded areas) and assemble. Refer toTechnical Data Sheet for complete information.

NOTE: High Strength Threadlocker works on metal parts. It is not recommended for plastics. Cured High Strength Threadlocker must be heated to 500°F (260°C)before parts will separate.

Medium Strength Threadlocker Blue - 36ml Bottle

OEM specified. All-purpose, medium strength threadlocker. Ideal for all nut and bolt applications 1/4″ to 3/4″ (6mm to 20mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly. Conforms to ASTM D 5363 AN0321 (Mil-S-46163A, Type II, Grade N). 

Applications:

• Automobile- Suggested Applications: Valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts, carburetor studs
• Motorcycle - Suggested Applications: Handlebar brackets, mirror fixtures, shock bolts, rear fender nuts, small fastener nuts
• Heavy Duty - Suggested Applications: Case cover bolts, axle housing bolts, oil seal retainer bolts, axle shaft flange bolts, differential drain plugs, fuel tank fasteners, lug nuts, windshield wiper nuts, gear shift knobs, door hardware, running light screws, horning mounting
• Marine - Suggested Applications: Valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts, carburetor studs

Directions:

1. Clean and dry parts using Permatex® Surface Prep™ activator.
2. Shake tube of Medium Strength Threadlocker well before each use.
3. Remove cap and snip nozzle tip.
4. Apply Medium Strength Threadlocker to threaded areas and assemble parts. Refer to Technical Data Sheet for complete information.

NOTE: Medium Strength Threadlocker works on metal parts. It is not recommended for plastics. Cured Medium Strength Threadlocker must be sheared (hand tools will do) before parts will separate.

SikaBiresin® CR72 - Pale Amber - 1 Gallon

Applications:

• High performance marine boats, parts, and tooling applications
• Suitable for wet layup, vacuum-bagging, infusion 

Features:

• Epoxy lamination system
• Low viscosity for excellent wet-out
• Three hardener choices: SikaBiresin® CH72-1 (Fast), SikaBiresin® CH72-2 (Medium), SikaBiresin® CH72-3 (Slow)
• UV resistant
• Above or below waterline applications
• RoHS and REACH compliant
• Non-styrene
• Excellent bond to all fabrics
• Suitable for aramid fiber laminates

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SikaBiresin® CH72-1 Fast Cure - Pale Amber - Quart

Applications:

• High performance marine boats, parts, and tooling applications
• Suitable for wet layup, vacuum-bagging, infusion 

Features:

• Epoxy lamination system
• Low viscosity for excellent wet-out
• Three hardener choices: SikaBiresin® CH72-1 (Fast), SikaBiresin® CH72-2 (Medium), SikaBiresin® CH72-3 (Slow)
• UV resistant
• Above or below waterline applications
• RoHS and REACH compliant
• Non-styrene
• Excellent bond to all fabrics
• Suitable for aramid fiber laminates

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SikaBiresin® CH72-2 Medium Cure - Pale Amber - Quart

Applications:

• High performance marine boats, parts, and tooling applications
• Suitable for wet layup, vacuum-bagging, infusion 

Features:

• Epoxy lamination system
• Low viscosity for excellent wet-out
• Three hardener choices: SikaBiresin® CH72-1 (Fast), SikaBiresin® CH72-2 (Medium), SikaBiresin® CH72-3 (Slow)
• UV resistant
• Above or below waterline applications
• RoHS and REACH compliant
• Non-styrene
• Excellent bond to all fabrics
• Suitable for aramid fiber laminates

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SikaBiresin® CH72-3 Slow Cure - Pale Amber - Quart

Applications:

• High performance marine boats, parts, and tooling applications
• Suitable for wet layup, vacuum-bagging, infusion 

Features:

• Epoxy lamination system
• Low viscosity for excellent wet-out
• Three hardener choices: SikaBiresin® CH72-1 (Fast), SikaBiresin® CH72-2 (Medium), SikaBiresin® CH72-3 (Slow)
• UV resistant
• Above or below waterline applications
• RoHS and REACH compliant
• Non-styrene
• Excellent bond to all fabrics
• Suitable for aramid fiber laminates

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SikaBiresin® AP112 + BPO Cream Hardener - White - Quart

Features:

• Structural bonding/repair system
• Fiber-filled for increased bonding strength
• For large scale repairs of broken FRP structures
• Easy to mix
• Excellent adhesive qualities

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SikaForce® 315 Super Fast Plastic & Metal Adhesive - Black - 3oz Tube

Features:

• Very fast setting
• High strength adhesive
• Excellent adhesion to a wide range of substrates
• Minimal surface preparation
• Excellent environmental resistance
• Syringe-style cartridge for easy dispensing
• Includes 2 static mixers to ensure proper 2-component mix and precision application

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Sikaflex® 291 Fast Cure - Black - 3oz Tube 

Sikaflex® 291 is a 1-component, marine grade polyurethane elastomeric adhesive and sealant. Used by many boat builders, its fast cure time makes it ideal for applications where speed is important. Sikaflex® 291 is manufactured in accordance with IOS 9001/14001 quality assurance system and the responsible care program.

Features:

• General purpose polyurethane marine sealant
• Fast curing
• Above and below water applications
• Ideal for sealing thru hull and hardware applications
• Excellent adhesion to Gelcoat
• Resists saltwater

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Sikaflex® 295 UV - White - 3oz Tube

Features:

• UV resistant – no cracking or chalking
• Salt water resistant
• Good gap filling properties
• Fast tack-free time
• Paintable and sandable
• Bonds and seals in one step
• Non-yellowing

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Sikaflex® 295 UV - Black - 3oz Tube

Features:

• UV resistant – no cracking or chalking
• Salt water resistant
• Good gap filling properties
• Fast tack-free time
• Paintable and sandable
• Bonds and seals in one step
• Non-yellowing

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Sikaflex® 291 Fast Cure - White - 3oz Tube

Sikaflex® 291 is a 1-component, marine grade polyurethane elastomeric adhesive and sealant. Used by many boat builders, its fast cure time makes it ideal for applications where speed is important. Sikaflex® 291 is manufactured in accordance with IOS 9001/14001 quality assurance system and the responsible care program.

Features:

• General purpose polyurethane marine sealant
• Fast curing
• Above and below water applications
• Ideal for sealing thru hull and hardware applications
• Excellent adhesion to Gelcoat
• Resists saltwater

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Sikasil® N PLUS - Translucent - 3oz

Features:

• Bonds well to most substrates
• Fungicide additive for mildew resistance
• Excellent flexibility for dynamic joint movement
• Extremely long service life
• All season ease of application

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.