|
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Wagner Power Steamer 915 Super Cleaner with Accessories. Put the pressure on dirt and debris. With just the touch of a button this power steamer goes to work cleaning grills stovetops bathroom fixtures floors rugs and so much more--without any chemicals. The pressurized steam system supplies continuous sanitizing steam for a deep clean. From Wagner. Yellow. Includes cleaner floor cleaning head and pad squeegee four utility brushes wallpaper removal attachment two extension tubes measuring cup and funnel. Four wheels. Plastic construction. Measures: 17" x 12" x 13.5". UL listed. One Year Ltd. Warranty. Made in China. This item cannot be shipped to APO/FPO addresses. Please accept our apologies.
|
4-1/2" SMALL ANGLE GRINDER KIT
11 Amp AC/DC 11,000 RPM 1.8 HP motor
Dust ejection system provide durability
Low profile gear case for access to tight areas
Wrenchless quick change wheel release
One-Touch guard allows for 360 deg. rotation
Paddle switch with safety lock-off
Oversized, protected spindle lock button
With side handle, wrench & kit box
DWE402K 4-1/2 IN. ANGLE GRINDER
SIZE:4-1/2"
DESC:5/8"-11 Spindle
|
4-1/2" BOSCH ANGLE GRINDER
6 Amps, 11,000 RPM, double insulated
Lock on/off switch for extended use application
Sealed switch keeps debris out
Tool stops when maintenance is required
Epoxy coated field windings
5/8" - 11 spindle - wide flexibility
Spindle lock for quick wheel changes
2-position auxiliary handle
1375A 4-1/2 IN. SM ANGLE GRINDER
|
This item can NOT be shipped to these states CA
5" MAKITA RANDOM ORBIT SANDER Smooth & fast sanding w/3.0 amp motor large 1/8" random orbit action ( 12,000 OPM) Controlled pad system speed upon start-up Efficient through-the-pad dust collection Dust-sealed switch minimizes contamination Rubberized grip for comfort and control Uses quick-change 5" (8-hole) hook-loop paper Oversized sealed ball-bearing construction BO5030K 5 IN. RANDOM ORBIT SANDER SIZE:5" |
Belt sanders 7.5 amp belt size 3 inches x21 Variable speed for optimum finish. 3 inches x 21 inch - 3 inches x 5- 1/2 inches platen; variable speed 790 - 1,300 sfpm. Rubber grips for comfort and control. 10 feet power cord. Includes dust bag and sturdy plastic carrying case. ...
|
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
1/2" IMPACT WRENCH
7.5 amps, no load speed 2,100 RPM
345 ft./lbs. of torque in forward & reverse
2,700 impacts per minute
1/2" detent pin anvil
AC/DC forward/reverse rocking switch
Soft grip handle for superior ergonomics
Ball bearing construction for durability
DW292 1/2 IN. IMPACT WRENCH
|
Aluminum base for exact flatness and long lasting durability, spring loaded paper clamps secure all types of paper, sealed rocker switch resists wear, soft grip handle. Specs: 120V/60Hz, no-load speed 12000 OPM, Base size is 4"x4-5/16", orbital diameter 1
/16", weight 3.3 lbs. Includes: 10 ft. cord, (1) dust box, (1) dust extraction adapter, (3) sanding paper, (1) punch.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
3 X 21" DRAGSTER BELT SANDER
Low profile design extends reach of sander
Front wheel sands 3X closer to edge of surfaces
Retractable hood exposes top of sanding belt
3-position adjustable handle
6.0 amps, 800 FPM opm
Dust collection with easy empty dust bag
Includes: sander, medium grit sanding belt
dust bag & manual
DS321 3X21 DRAGSTER BELTSANDER
|
Debris baffles protects internal components, external brush doors reduces service time by providing easy access to brushes, soft grip main handle, burst resistant guard, adjust the guard without a tool, 7" and 9" type 27 guard included for added productiv
ity. Specs: 120V (AC/DC), wheel diameter 7”/9”, trigger w/ lock-on, max watts out (power) 3,130, no load RPM 6,000 , multi-port exhaust, tool free guard, 4.2 HP max horse power, use wheels RPM above 6,600, gears spiral bevel, epoxy motor protection,
multi-port exhaust system, spindle thread 5/8"-11 , double insulated, 8' 2-wire cord, easy actuation spindle lock, length 21", weight 13.7 lbs. Includes: grinder, side handle, 7" & 9" type 27 guards, spanner wrench, flanges.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
The PORTER-CABLE 380 1/4 Sheet Orbital Finish Sander features a 2.0 Amp motor which moves at 13,500 opm, providing a superior finish. The dual plane, counter-balanced low-vribation design reduces user fatigue. A dust-sealed switch protects against dust ingestion for longer switch life. This unit features sealed 100% ball-bearing construction. Generally used for fine finishing before coatings, less aggressive material removal than RO sanders, or sanding into corners. This unit includes Sander, Operating Manual and Paper Punch.
|
Accepts 5", 8-hole PSA (pressure sensitive adhesive) paper that allows sanding discs to be switched quickly and easily, textured anti slip top and body grip, maintains controllable pad speed and minimizes gouging during start up, dust sealed switch, seale
d 100 percent ball bearing construction, high capacity dust bag with built in vacuum adapter, dual plane counter-balanced fan reduces user fatigue. Specs: orbits/min 12,000 OPM, orbit diameter 3/32", CFS pad break, weight 3.4lbs. Includes: dust bag with v
acuum adapter.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Variable speed control dial matches the speed to the application, auto tracking belt system, sands flush to wall with nose and side of sander, front grip, dust bag. Specs: 120V, only 85dB, ft./min. 690-1,440 , 11-5/8"L, 16.4 ft. power cord, double insulat
ed, weight 9.5 lbs. Includes: (1) #80 abrasive belt, dust bag.
Belt Size In=3x21
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
| Powerful 6-Amp motor for superior performance | No load speed of 820 FPM for more efficient sanding | Low-profile design to access tight areas | New and improved GRIPZONE overmold for optimum grip and user comfort | On/off trigger switch with lock-on for user convenience | Tool-less tracking knob and belt tension release lever
|
Electronic variable speed. Soft-start for improved operator control. Die-cast aluminum gear housing. Extended rear handle design for balance. Two position auxiliary handle. Lock-on switch for extended use. Spindle lock for quick accessory changes. Convert
s easily from a sander to a polisher. No load speed 600-3000 rpm. Wheel size 7" (185 mm). Arbor size: 5/8"-11. Weighs 7 lbs. Accepts all standard 7" sanding and polishing accessories. Includes: 7" foam polishing pad, hook and loop backer pad, (1) 7" sandi
ng disc, rubber backing pad, wrench and assist handle.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Compact size maximizes user control, multipurpose used for material removal and surface preparation, filtered dust collection, soft grip body, dust sealed switch. Specs: orbits/min 6,000 OPM. Includes: paper punch, (1) sheet sandpaper.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
3.0 amp motor that spins the pad at 8,000 - 12,000 opm. Shorter height allows the user to get closer to the work piece for sanding. Rubber over-mold in all of the critical areas of the sander. Separate counterweight design reduces vibration for improved c
omfort. Improved dust-sealed switch to protect against dust ingestion for longer switch life. Improved dust collection and interfacing with vacuum locking system. Dust bag has one-hand locking system. Tool weighs only 2.9 lbs. Includes: Sander, dust bag,
owners' card and carrying bag.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Super joint system helps prevent gear damage caused by accidental wheel binding. Variable speed control dial enables user to match the speed to the application. Powerful 12.0 amp motor for increased output power in a more compact tool. Soft start feature
for smooth start-ups. Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life. Electronic speed control maintains constant speed under load. Larger and improved carbon brush material for longer tool life.
Tool-less wheel guard adjustment for easy clamping.3-1/2" wire cup brush, 4-1/2" sanding disc. No load speed 2,800-10,500 rpm. 5/8" x 11 UNC spindle thread. Dimensions: 11-3/4"L x 5-1/15"W x 4". Weighs only 5.3 lbs.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Motor overload protection, epoxy protection extends motor life by protecting the copper wire from abrasion, debris baffles protect internal components by deflecting damaging debris out of the airflow, multi port exhaust reduces motor burn up by efficientl
y venting hot air out of the grinder, extra large paddle switch, tool free, burst resistant guard. Specs: 120V (AC only), 4-1/2" wheel diameter, speed (RPM) 10,000, slide switch, 5/8"-11 spindle thread size, spindle lock, side handle, 8' cord, max watts o
ut (Power): 825 MWO, double insulated, easy actuation spindle lock, 8' 2-wire cord, Length 11.8", weight 5.0 lbs. Includes: (1) slide handle, (1) type 27 guard, (1) spanner wrench, (1) Flange.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Clean out mortar joints while tuckpointing, smooth rough edges, and level surfaces with the Pro-Series 4.5 Inch Angle Grinder. This 11,000 RPM single speed Angle Grinder is ideal for use in your home workshop, but is still powerful enough to be used in a more commercial setting for metal working and construction. The 5/8 inch arbor accepts other wheel types for buffing, polishing, sanding and removing rust and paint. A trigger power button with lock on feature is easy to use even while wearing gloves. The grip is adjustable to use in either the right or left hand. A grinding wheel is included so the Angle Grinder is ready to use right out of the box.
|
The SS75US3 wallpaper stripper is the premier steamer kit for faster and easier removal of wall coverings. Wallpaper steamers are the fastest and easiest way to remove all types of wallcoverings the first time, every time. No chemicals required, just water. Remove multi-layered or painted wallpaper or other difficult coverings in hours, not days. Will even remove popcorn coatings from ceilings. The SS75US3 has a 1500 watt element, 120 volts, 1.3 gallon tank, 137 minute usage time and a 23 minute steam up time, 11" long x 8" wide lightweight steam plate and a small steam plate and scraper tool included, 12' Super Cool running hose and 6.5' power cord.
|
4.5" H/D angle grinder CUL 6.8 amps
Specification: • 120V AC operation • 1-phase/60Hz cycle • powerful 6.8 amps rated current • 11,000 RPM • 4-1/2-in. wheel • 5/8-in. and 7/8-in. arbor • 2-meter cord length • C-UL Listed • Dimensions: 12 X 5 X 5.5 inch |
5" ANGLE GRINDER 9 amp motor, AC/DC Install handle on either side of tool Spindle lock for easy wheel changes Lock-on button for continuous use Includes: grinding wheel, wheel guard side handle, inner flange, lock nut lock nut wrench & spindle washer 9005B 5 IN. ANGLE GRINDER
|
5" MEDIUM ANGLE GRINDER
12.0 Amp AC/DC grinder has 10,000 rpm motor
Delivers high speed & fast material removal
Keyless adjustable guard
Rear handle design for comfort & control
External brush caps for easy servicing
Sealed ball & roller bearings extends tool life
Includes 1 grinder wheel, wrench, backing -
flange, clamp nut, guard & side handle
DW831 5 IN. MEDIUM ANGLE GRINDER
SIZE:20 Volt
DESC:5/8"x11 Spindle
|
| AirGuard dust collection for collection of 90% of the dust | Hook and loop backing pad for a secure fit and improved sanding | Soft start and pad brake to help prevent gouges in the workpiece | Through-body sealed slide switch for reliability and effortless use
|
2 amp variable speed oscillating tool with universal fit blade system. Variable speed 11,000-2000 oscillations provide the right speed for various tasks. 3.2 degrees oscillation angle. 10 foot cord to allow most uses without an extension cord. Lightweight at only 2 lbs. Included accessories: (1) end cut blade, (1) HSS semi circle blade, (1) hex key and (1) sanding pad with 3 sheets of sandpaper in 80, 120, and 180 grit. The universal interface fits most brand of accessories. ...
|
Metal gear case for durability and longer life, convenient slide switch for easier use, two Position side handle provides added comfort and control, spindle lock for easy accessory changes, contoured body grip for added comfort and control. Specs: 10000 R
PM, spindle size 5/8"-11. Includes: metal grinding wheel, spanner wrench.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Continuous rating input of 440W, ball and needle bearing construction for longer tool life, well defined exterior, and ergonomic soft grip. Specs: 120V, no load speed 4,500 RPM, double insulated, 5" sand disc, 7-1/8"L, weight 2.6 lbs. Includes: (1) abrasi
ve disc, plastic pad, side handle, hex wrench.
Disc Size In=5
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Rubberized palm grip for comfort and control. Powerful 2.2 amp motor. 12,000 orbits per minute and random orbit action for fast, swirl-free sanding. Hook and loop system for quick and easy paper changes. 5" pad with standard 8 hole pattern. Through-pad du
st collection. Dust-protected on/off switch. Includes: dust bag and sanding disc assortment. Weighs 3 lbs.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
|
|
|
|
Copyright © 1999-2021 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |