HIGH SPEED ROUTER BIT
High speed steel
For routing, inlaying & mortising
Use with Dremel no. 230 router attachment
& no. 231 shaper/router table
1/8" shank
650 1/8 IN. STRAIGHT ROUTING BIT
SIZE:1/8"
|
6PC ROUTER BIT SET
1/4", 3/8" & 1/2" straight; 3/8" roundover;
5/32" roman ogee; and 1/4" corebox bits
23000 6PC ROUTER BIT SET
|
Up spiral bits combine effective chip removal with a cut that can't be matched by standard straight bits. Computer designed flutes provide the chip removal required in production settings. Suited for cutting mortices or routing deep blind holes. Excellent
for grooves and dados in all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
1/4" Shank - 2-1/2" O.A. Length - Carded
Cut Dia. x Carb Ht=1/4 x 1
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
STRAIGHT ROUTER BIT
Carbide tipped silver series bits
Heat treated shanks & bodies
End-relieved for plunge cutting
1/4" shank diameter
Size dimensions= overall diameter x cutting -
edge length x overall length
23103 1/4X1 STR 2F ROUTER BIT
SIZE:1/4x1x2-1/4"
DESC:2 Flutes
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
SOLID CARBIDE
1/4" Shank - 2-7/8" O.A. Length - Carded
Cut Dia x Lgth Ins=1/4 x 1
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
SOLID CARBIDE
1/4" Shank - 1-3/4" O.A. Length - Carded
Cut Dia x Lgth Ins=1/8 x 3/8
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
TCT CARBIDE FLUSH LAMINATE TRIM BIT
For smooth flush cuts on laminate materials
Premium micro-grain carbide tips provide strong-
sharp cutting edges, reducing wear for long life
Tips are induction brazed with silver solder -
for a strong bond, then precision ground
Heat treated bodies & with anti-kickback design
SIZE= Cutting Diameter x Cutting Length
LENGTH= Shank Length x Overall Length
40214 3/8 TCT FLUSH LAM ROUTER
SIZE:3/8" x 9/16"
LENGTH:1-3/16"x 2-3/16"1/4" Round Shank
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
SOLID CARBIDE
1/4" Shank - 2-1/4" O.A. Length - Carded
Cut Dia x Lgth Ins=1/4 x 3/4
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
ROMAN OGEE ROUTER BIT
Carbide tipped silver series
Heat treated shanks & bodies
1/4" shank diameter
1/2" bearing diameter
Size dimensions= overall diameter x cutting-
edge length x overall length
23149 5/32R ROMAN OGEE RTR BIT
SIZE:1-1/8x1/2x2-5/16
RADIUS:5/32"
|
TCT CARBIDE DOVETAIL BIT
For cutting professional dovetail joints
Premium micro-grain carbide tips provide strong-
sharp cutting edges, reducing wear for long life
Tips are induction brazed with silver solder -
for a strong bond, then precision ground
Heat treated bodies & with anti-kickback design
SIZE= Cutting Diameter x Cutting Length
LENGTH= Shank Length x Overall Length
40163 1/4 TCT DOVETAIL ROUTER
SIZE:1/4" x 1/4"
LENGTH:1-3/8" x 1-5/8"1/4" Round Shank
|
Up spiral bits combine effective chip removal with a cut that can't be matched by standard straight bits. Computer designed flutes provide the chip removal required in production settings. Suited for cutting mortices or routing deep blind holes. Excellent
for grooves and dados in all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
1/4" Shank - 2" O.A. Length - Carded
Cut Dia. x Carb Ht=1/8 x 1/2
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Designed to cut deep or shallow V" grooves. Bits are used for sign making or for adding decorative accents to furniture and plaques. Cuts all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as hand
held and table mounted portable routers.
90 DEGREE ANGLE
1/4" Shank - 1-3/4" O.A. Length - Carded
Cut Dia. x Carb Ht=1/2 x 7/16
This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
SOLID CARBIDE
1/4" Shank - 2" O.A. Length - Carded
Cut Dia x Lgth Ins=3/16 x 1/2
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
RABBETING ROUTER BIT
Carbide tipped silver series bits
Heat treated shanks & bodies
Ball bearing guides
1/4" shank diameter
Bearing diameter: 1/2"
Size dimensions= overall diameter x cutting -
edge length x overall length
23117 3/8X1/2 RABBET RTR BIT
SIZE:1-1/4x1/2x2-1/8"
RABBET WIDTH:3/8"
|
Adjustable, produces perfect fitting rail and stile doors from 5/8" to 1-1/4" stock. Premier adjustable rail and stile router bit system, carbide tipped, anti-kickback router bits that are computer balanced, cuts all composition materials, plywood, hardwo
od, and softwoods. Use on table mounted portable routers.
1/4" Shank-Carded
OA Lgth In=3-3/4OA Diax Carb Ht In=1-11/16x1-1/4
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Profile can be changed by changing the height of bit. Cuts all composition materials, plywood, hard wood and soft wood. Use on hand held and table mounted portable routers. 3/8" bearing diameter.
1/4" Shank - 2-3/8" O.A. Length - Carded
Cut Dia x Carb Ht =1-3/8 x 23/32
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Chamfer size is easily adjusted by changing the height of the bit. Cut all composition materials, plywood, hard wood and soft wood. Use on hand held and table mounted portable routers. 1/2" bearing diameter.
1/2" Shank - 45 Degree Angle - 2-9/16
O.A.Dia x Carb Hght=1-3/4 x 5/8
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Bits will produce super cuts on both surfaces of the rabbet. Can be used in joining boards or for letting in back panels. Cuts all composition materials, plywood, hard wood and soft wood. Used on hand held and table mounted portable routers. Comes with in
terchangeable bearings to cut the following depths: 1/8 ",1/4", 5/16", 3/8", 7/16" and 1/2".
1/4" Shank
Dia x OA Lgth Ins=1-3/8 x 2-1/4Carbide Ht. In=1/2
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Designed with a deep center gullet for maximum material removal without clip loading. Ideal bits to use with templates for setting butt hinges. Cuts all composition materials, plywood, hardwood, and soft wood. Use on CNC and other automatic routers as wel
l as hand held and table mounted portable routers.
CARBIDE TIPPED - TOP BEARING
1/4" Shank - 2-7/16" O.A. Length - Carded
Cut Dia. x Lgth Ins=1/2 x 5/16
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Bits are often used to soften the edge of furniture. Shear angle provides the smoothest cut available. Cuts all composition materials, plywood, hard wood, and soft wood. Use on hand held and table mounted portable routers. 1/2" bearing diameter.
1/4" Shank - 2-3/16" O.A. Length - Carded
Cut Dia.x Flute In.=1 x 1/2Radius In=1/4
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Bits will produce super cuts on both surfaces of the rabbet. Can be used in joining boards or for letting in back panels. Cuts all composition materials, plywood, hard wood and soft wood. Used on hand held and table mounted portable routers. Comes with in
terchangeable bearings to cut the following depths: 1/8 ",1/4", 5/16", 3/8", 7/16" and 1/2".
1/2" Shank
Dia x OA Lgth Ins=1-3/8 x 2-1/4Carbide Ht. In=1/2
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
1/4" Shank-Carded
OA Lgth In=3-3/4OA Dia x Carb Ht In=1-11/16x1-1/4
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
1/2" C-T FLUSH TRIM BIT
Carbide tipped for lasting performance
1/4" heat-treated shank
1" cutting length
1/2" diameter bit
Bearing tip for smoother cuts
23159 1/2X1 FLUSH TRIM RTR BIT
|
Chamfer size is easily adjusted by changing the height of the bit. Cut all composition materials, plywood, hard wood and soft wood. Use on hand held and table mounted portable routers. 1/2" bearing diameter.
1/4" Shank - 45 Degree Angle - 2-3/16
O.A.Dia x Carb Hght=1-1/2 x 1/2
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
3 piece premier adjustable cabinet bit set. Designed to be used on 5/8" to 1-1/4" stock. Includes attractive wooden storage box. Cuts all composition materials, plywood, hardwoods and softwoods. Use on table-mounted portable routers with 1/2" shank.
1/2" Shank
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
COVE ROUTER BIT
Carbide tipped silver series cove bits6
Heat treated shanks & bodies
1/4" shank diameter
1/2" bearing diameter
Size dimensions= overall diameter x cutting edge-
length x overall length
23141 1/2R COVE 2F ROUTER BIT
SIZE:1.5x5/8x2-7/16"
RADIUS:1/2"
|
ROUNDOVER / BEADING ROUTER BIT
Create beading profiles
Exchange 1/2" bearing w/ 3/8" bearing (included)
Carbide tipped
Heat treated shanks & bodies
1/4" shank diameter - bearing diameter 1/2"
Size dimensions= overall diameter x cutting edge-
length x overall length
23130 1/8R BEAD 2BB 2F RTR BIT
SIZE:3/4x13/32x2-1/8"
RADIUS:1/8"
|
Creates key holes for hanging plaques and shelves. Large diameter bores holes to allow nail or screw heads to enter the slot while the smaller diameter allow room for the shank of the nail or screw. Cuts all composition materials, plywood, hard wood and s
oft wood. Use on CNC and other automatic routers as well as hand held table mounted portable routers.
1/4" Shank - 1-5/8" O.A. Length - Carded
Cut Dia. x Carb Ht=25/64 x 7/16
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Micrograin bits for cutting rounded grooves in a variety of applications including doors and columns.
1/4" Shank - 2-1/32" O.A. Length - Carded
Cut Dia x Flute In=3/4 x 7/16Radius Ins=3/8
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
TCT STRAIGHT CARBIDE ROUTER BITS
For dado, box joint, tenon, mortise & T&G cuts
Premium micro-grain carbide tips provide strong-
sharp cutting edges, reducing wear for long life
Tips are induction brazed with silver solder -
for a strong bond, then precision ground
Heat treated bodies & with anti-kickback design
SIZE= Cutting Diameter x Cutting Length
LENGTH= Shank Length x Overall Length
40104 3/8 TCT STRAIGHT ROUTER
SIZE:3/8" x 25/32"
LENGTH:1-3/16" x 2"1/4" Shank Size - 2 Flutes
|
TCT CARBIDE DOVETAIL BIT
For cutting professional dovetail joints
Premium micro-grain carbide tips provide strong-
sharp cutting edges, reducing wear for long life
Tips are induction brazed with silver solder -
for a strong bond, then precision ground
Heat treated bodies & with anti-kickback design
SIZE= Cutting Diameter x Cutting Length
LENGTH= Shank Length x Overall Length
40165 1/2 TCT DOVETAIL ROUTER
SIZE:1/2" x 15/32"
LENGTH:1-1/4" x 1-3/4"1/4" Round Shank
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
SOLID CARBIDE
1/4" Shank - 2" O.A. Length - Carded
Cut Dia x Lgth Ins=1/4 x 1/2
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
|
|
|
|
Copyright © 1999-2021 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |