The Metra 40-EU10 adapter lets you connect an aftermarket receiver to the factory antenna cable. It offers a male Motorola plug on one end and a female OEM antenna jack on the other. Antenna to Radio Adapter Cable>For select 2002-Up BMW/Volkswagen vehicles>Factory antenna with mini-style plug to aftermarket radio>Connect your factory antenna cable to any aftermarket receiver>European Antenna Adapter Single Connector (FAKRA)>For Dual Connector Applications Use The 40-EU56 This item cannot ship to APO/FPO addresses. Please accept our apologies.

Replace your ugly factory metal shaft antenna with this stylish yet functional low profile (13 inch) flexible rubber antenna that will not hit the garage door anymore!

For 2002+ Chrysler models L 11.5000 W 2.0000 H .5000 This item cannot be shipped to APO/FPO addresses.  Please accept our apologies

Ford factory antenna to aftermarket radio ; OEM style; Ford, Lincoln, Mercury 1995-2005 antenna adapter

• Compatible with all new radios, boom boxes & docks that work on SiriusXM(R), XM(R) & Sirius(R) networks;• Easily attaches to nearly any surface including the roof, side of a building, pole, balcony or mast;• Built-in universal mounting bracket with hardware;• Sturdy weatherproof design;• Includes built-in amp & high-performance 50ft detachable low-loss RG58/U coaxial cable with SMA-male to SMB-female connectors;

• Wideband reception covering 25MHz-1,300MHz;• Transmit bands 144MHz/220MHz/440MHz/900MHz/1,290MHz;• Rust-free stainless steel structure;• 200W max power ;• SWR

• 3ft tall;• 500W;• Omnidirectional;• Waterproof;• UHF female SO-239 connector;• Mounting bracket with stainless steel hardware;• Cable not included;

• Heavy-duty thick stainless steel "L" bracket for side or mast mounting plus hardware for rail mounting;• Covers all marine-band frequencies;• 6dB gain ;• 38" tall;• 15ft low-loss RG58A/U coaxial cable with PL-259;

• 3/8"-24 thread mounting;• Chrome plated brass;

• 136MHz-150MHz VHF 2.14dBi gain;• 400MHz-470MHz UHF 3dBi gain;• 800MHZ-960MHz 3dBi gain;• 100MHz-1300MHz 3dBi gain;• 16 1/2" tall;• Replaceable whip with brass set screw;• 1 1/4" black finish mini-magnet base;• 10ft RG174 cable with BNC-male connector installed;

• Wideband reception covering 25MHz-1,300MHz;• Transmit bands 26MHz/27MHz/46MHz/49MHz/72MHz/144MHz/220MHz/440MHz/900MHz/1,290MHz;• Rust-free stainless steel structure;• 300W max power or 200W max power for CB;• SWR

• Black steel magnet housing;• 17ft low-loss RG-58 A/U coax cable: tinned copper braid 95%, solid insulation, stranded tinned copper center conductor;• PL-259 male connector;• 3/8"-24 thread mounting;• With rubber boot;

• Freq range: 144MHz-174MHz VHF NMO antenna ;• 3dBd gain - 5/8 wave ;• 51" tall black finish NMO mounting antenna with gold-plated plunger-type contact pin;• Solid brass NMO mount with gold-plated brass contact pin & high-frequency, fully enclosed, fully shielded & fully weatherized zinc die-cast housing ;• 17ft RG58/U low loss premium coaxial cable with UHF male PL-259 connector installed ;• Stainless steel L-bracket with black finish for trunk groove or side mounting ;• Can be mounted in 3/4" hole ;

Aftermarket radio to OE antenna adapter; Nissan(R) diversity antenna adapter ; Retains diversity functions with applicable diversity radios ; Note: aftermarket diversity radios are no longer made

• 8.3dBd gain VHF 144MHz-148MHz;• 11.7dBd gain UHF 430MHz-450MHz;• 17ft tall;• Omnidirectional;• Heavy-duty fiberglass construction;• 3 sections;• Imp: 50ohm ;• UHF female (SO-239) connector;• Mast diameter accepted: 1 3/16" x 2 7/16";• Includes mounting bracket & 3 stainless steel radials 20 1/2";

• 136MHz-150MHz VHF 2.14dBi gain;• 400MHz-470MHz UHF 3dBi gain;• 800MHZ-960MHz 3dBi gain;• 100MHz-1300MHz 3dBi gain;• 16 1/2" tall;• Replaceable whip with brass set screw;• 1 1/4" black-finish mini-magnet base;• 10ft RG174 cable with SMA-male connector installed;

If you took the proven features and performance of the famous "KW" series antennas and added a unique tuning mechanism to the top, you would own the equivalent of a Firestik II, "FS" Series antenna. Aside from the ease of tuning, the patented design broadens the antennas bandwidth to keep SWR lower over more channels. The upper coil extension also increases the power handling capability of the antenna. All "FS" antennas are compatible with autos, trucks, vans, motorcycles and ATV's in a single antenna configuration when metallic ground plane is available. Or, they may be used in dual (co-phased) configuration on any vehicle made from any type of material. Like all CB antennas, the "FS" antennas should be fine-tuned (SWR) in their final mounting location. If you have ever tuned a non-tunable tip antenna, you will have a real appreciation for the "FS" antennas. To tune a "FS" antenna, you just pop-of the tip and turn the adjustment screw up or down as needed. All "FS" antennas exceed the requirements of any CB radio, new or old. Aside from the hi-performance loading coil that maximizes the transmit/receive functions of your CB, these top-loaded antennas will also receive the NOAA emergency weather alert and national weather broadcasts for radios with those features. The "FS" antennas are 100% American made with 100% American materials. To maintain a balance between flexibility and ruggedness, we use a custom blended, glass fiber reinforced shaft. Each is wound with heavy insulated copper wire to prevent the oxidation and shorted windings often found on non-Firestik antennas. The tunable tip mechanism is made from rust-proof brass and has a rubber o-ring to hold the adjuster in place after tuning. Our 3/8"-24 threaded base has a tapered contact point that works especially well with Firestik mounts and accessories. The tapered "lug-nut" effect transfers stress away from the threads and reduces the possibility of vibration induced loosening of the antenna in its mount. Each antenna is covered with a static reducing, water-tight sleeve containing UV and pigment stabilizers. For peak performance we recommend that you use one of our 18-foot Fire-Flex coaxial cables with these antennas #DASTS-8X18. All "FS" series antennas are factory bench tested for resonant frequency and overall quality. Don't forget ... ALL antennas, regardless of style or manufacturer, MUST be tuned after installation on the vehicle. Transmitting antennas are not "plug-n-play" devices. 5 Year Limited Warranty.

For CB mounts and cables.

If you took the proven features and performance of the famous "KW" series antennas and added a unique tuning mechanism to the top, you would own the equivalent of a Firestik II, "FS" Series antenna. Aside from the ease of tuning, the patented design broadens the antennas bandwidth to keep SWR lower over more channels. The upper coil extension also increases the power handling capability of the antenna. All "FS" antennas are compatible with autos, trucks, vans, motorcycles and ATV's in a single antenna configuration when metallic ground plane is available. Or, they may be used in dual (co-phased) configuration on any vehicle made from any type of material. Like all CB antennas, the "FS" antennas should be fine-tuned (SWR) in their final mounting location. If you have ever tuned a non-tunable tip antenna, you will have a real appreciation for the "FS" antennas. To tune a "FS" antenna, you just pop-of the tip and turn the adjustment screw up or down as needed. All "FS" antennas exceed the requirements of any CB radio, new or old. Aside from the hi-performance loading coil that maximizes the transmit/receive functions of your CB, these top-loaded antennas will also receive the NOAA emergency weather alert and national weather broadcasts for radios with those features. The "FS" antennas are 100% American made with 100% American materials. To maintain a balance between flexibility and ruggedness, we use a custom blended, glass fiber reinforced shaft. Each is wound with heavy insulated copper wire to prevent the oxidation and shorted windings often found on non-Firestik antennas. The tunable tip mechanism is made from rust-proof brass and has a rubber o-ring to hold the adjuster in place after tuning. Our 3/8"-24 threaded base has a tapered contact point that works especially well with Firestik mounts and accessories. The tapered "lug-nut" effect transfers stress away from the threads and reduces the possibility of vibration induced loosening of the antenna in its mount. Each antenna is covered with a static reducing, water-tight sleeve containing UV and pigment stabilizers. For peak performance we recommend that you use one of our 18-foot Fire-Flex coaxial cables with these antennas #DASTS-8X18. All "FS" series antennas are factory bench tested for resonant frequency and overall quality. Don't forget ... ALL antennas, regardless of style or manufacturer, MUST be tuned after installation on the vehicle. Transmitting antennas are not "plug-n-play" devices. 5 Year Limited Warranty.

REPL ANTENNA ASSEMBLY

• 3dBd gain ;• Antenna can be removed or replaced from mount without having to remove the cable from the boat after being installed ;• Heavy-duty fiberglass construction ;• Covers all marine band frequencies ;• Complete with nylon ratchet mount for easy lay-down ;• Coaxial cable is built in to ratchet mount ;• 20ft RG58/U low-loss premium coaxial cable;• Easy screw-off PL-259 connector for small hole installation;

Nissan factory antenna cable to aftermarket radio

• 3 section;• 18ft tall;• 1/2 wave over 1/4 wave;• 2,000W;• Omnidirectional;• Heavy-duty fiberglass;• UHF female SO-239 connector;• Imp: 50ohm ;• Includes mounting bracket with stainless steel hardware;• Cable not included;

• Freq ranges: 30MHz-50MHz/144MHz-174MHz/430MHz-520MHz/800MHz-950MHz;• 36" tall ;• Stainless steel whip;• 12ft low-loss RG58/U cable with BNC-male connector installed;

• Home antenna with hinged base for adjusting to find the best signal reception;• Compatible with all radios & docks that work on the Sirius(R), XM(R) & SiriusXM(R) networks;• Moisture-resistant;• Includes 20ft heavy-duty RG174 cable;

European factory radio with mini-style plug to universal antenna

• No tuning;• Unity gain;• 1/4 wave;• 200W;• Chromed solid brass NMO mount;• Gold plated brass contact pin;• Stainless steel flexible whip;• 18 1/2" tall;• VSWR < 1.5:1;• NMO mounting;• Mount sold separately;

Use spring on a mount, vehicle body or available bracket to accept our standard 3/8-24 threaded flags. Can be mounted in any hole from 3/8" (10mm) to 1/2" (13mm). Has a body diameter of 0.800" (20mm) and a mounted height of 3.16" (80mm). Has a stainless steel body. All mounting hardware is stainless steel.

• Freq ranges: 150MHz-174MHz VHF, 440MHz-490MHz UHF, 800MHz-1,000MHz;• 18" tall black-finish stainless steel NMO mounting antenna with gold plunger-type contact pin;• Solid brass NMO mount with gold-plated antenna contact pin & high-frequency fully enclosed, fully shielded, fully weatherized zinc die-cast housing;• 17ft low-loss RG58/U coaxial cable with BNC-male connector installed;• Stainless steel "L" bracket with black finish for trunk groove or side mounting;• Can be mounted in 3/4" hole;

VW Audi European factory antenna with flat plug to aftermarket radio; Includes capacitor to match imp; Some newer European radios also have capacitors which do not allow this adapter to work properly

• 135MHz-174MHz frequency range;• 5MHz bandwidth;• 6dBd gain;• 5/8 over 5/8 wave;• 3 stainless steel 20 1/2" radials;• Vertical polarized;• SO-239 UHF female connector;• 50ohm ;• 200W;• 10ft;