The new line of XRC JK front fenders was specifically engineered to provide the protection and clearance needed when you're pushing your rig through the toughest conditions. Each piece of armor is manufactured out of 3/16" cold rolled steel and then powder coated in Smittybilt's signature series two stage matte black powder coat finish. Each fender is designed to be a complete bolt- on with stainless steel fasteners and requires no modification to the vehicle. All of the XRC Fenders come with an inner fender liner to keep mud, snow or any other debris out of the engine compartment and replaceable slide plates.
Fits 2007 to 2014 JK Wrangler, Rubicon and Unlimited
2 and 4-door models
Two stage matte black powder coat finish
3/16" cold rolled steel
Includes inner fender
Stainless steel hardware
No modification to vehicle required
Pair
|
Smittybilt MAG-ARMOR (MAGNETIC TRAIL SKINS) are designed to protect your Jeep's sides and doors from trail hazards. The 9 piece set of triple layered protection is sure to keep your paint looking flawless and can be easily removed at any time. 2-DOOR Fits 2007 to 2016 JK Wrangler and Rubicon;2-door models;Set of 9;Custom CNC-cut to fit your JK perfectly;Protect its sides and doors from trail hazards;Triple-layered protection at 0.040" (1mm) thick;Powerful rare earth Stratum Ferrite magnet for unparalleled holding strength;Durable, rust resistant, German-manufactured PVC;Working temperature of 0–130°F;Printable UV surface for ultimate customization;Highway rated
|
Smittybilt MAG-ARMOR (MAGNETIC TRAIL SKINS) are designed to protect your Jeep's sides and doors from trail hazards. The 15 piece set of triple layered protection is sure to keep your paint looking flawless and can be easily removed at any time. 4-DOOR Fits 2007 to 2016 JK Wrangler Unlimited and Rubicon Unlimited;4-door models;Set of 15;Custom CNC-cut to fit your JK perfectly;Protect its sides and doors from trail hazards;Triple-layered protection at 0.040" (1mm) thick;Powerful rare earth Stratum Ferrite magnet for unparalleled holding strength;Durable, rust resistant, German-manufactured PVC;Working temperature of 0–130°F;Printable UV surface for ultimate customization;Highway rated
|
Side Panel; Passenger Side;
|
Smittybilt's all new XRC Armor Flat Armor Skins for Jeep JKs are manufactured from 3/16" cold roll steel, and are hand crafted to insure a perfect fit every time. Each Flat Skin comes complete with everything you need to install these guards on your Jeep, including stainless steel hardware and detailed installation instructions. They are finished in a black powder coat and can be used with our XRC Armor Rocker Guards. FRONT - BLACK TEXTURED Fits 2007 to 2016 JK Wrangler, Rubicon and Unlimited;2 and 4-door models;Made of 1/8” cold rolled steel to provide maximum protection;Contours perfectly to the OE panels;Ability to bolt the stock fenders back on;Two-stage textured matte black finish;Powder coat finish - 5 year limited warranty;Drilling required for installation;All mounting hardware included;Sold as a pair
|
Fender Panel; Passenger Side;
|
TRUCK TRAIL ARMOR ROCKER
|
Smittybilt's all new XRC Armor Flat Armor Skins for Jeep JKs are manufactured from 3/16" cold roll steel, and are hand crafted to insure a perfect fit every time. Each Flat Skin comes complete with everything you need to install these guards on your Jeep, including stainless steel hardware and detailed installation instructions. They are finished in a black powder coat and can be used with our XRC Armor Rocker Guards. REAR - BLACK TEXTURED Fits 2007 to 2016 JK Wrangler and Rubicon;2-door models;Made of 1/8” cold rolled steel to provide maximum protection;Maximum rear quarter panel protection from door jam to tailgate jam;Contours perfectly to the OE panels;Integrated protection for rear tail lights;Ability to bolt the stock fenders back on;Two-stage textured matte black finish;Powder coat finish - 5 year limited warranty;Drilling required for installation;All mounting hardware included;Sold as a pair
|
Smittybilt's all new XRC Armor Flat Armor Skins for Jeep JKs are manufactured from 3/16" cold roll steel, and are hand crafted to insure a perfect fit every time. Each Flat Skin comes complete with everything you need to install these guards on your Jeep, including stainless steel hardware and detailed installation instructions. They are finished in a black powder coat and can be used with our XRC Armor Rocker Guards. REAR - BLACK TEXTURED Fits 2007 to 2016 JK Wrangler Unlimited and Rubicon Unlimited;4-door models;Made of 1/8” cold rolled steel to provide maximum protection;Maximum rear quarter panel protection from door jam to tailgate jam;Contours perfectly to the OE panels;Integrated protection for rear tail lights;Ability to bolt the stock fenders back on;Two-stage textured matte black finish;Powder coat finish - 5 year limited warranty;Drilling required for installation;All mounting hardware included;Sold as a pair
|
Body Armor Cladding protects the body and adds tough off road looks to your TJ Wrangler. Made of 100% UV resistant diamond textured black plastic with easy NO Drill installation using 3M adhesive tape. Available in Matte Black, or can be painted to match vehicle.
This is JUST the Front Fender Corner Guards.
Fits 1997 to 2006 TJ Wrangler, Rubicon and Unlimited
Diamond textured black plastic
100% UV resistant
No drilling required
|
Exclusively for the Jeep JL, The Fab Fours Rear Full Tube Doors provide the ultimate in aggressive styling, functionality and durability. Experience the trails and the road the way it was meant to be, with little to no rattles, open visibility and substantial security. Key Features and Benefits include Full Surround tubing, integrated Sun Visor, solid rattle resistant design.
|
Exclusively for the Jeep JL, The Fab Fours Front Half Tube Doors provides the ultimate aggressive styling, functionality and durability. Experience the trails and the road the way it was meant to be, with little to no rattles, open visibility and substantial security. Key Features and Benefits include Full Surround tubing, integrated Sun Visor, solid rattle resistant design. Optional Side Mirror Bracket (JK1032-1) (Supports OE Style JK Aftermarket Mirrors)
|
Exclusively for the Jeep JL, The Fab Fours Rear Half Tube Doors provide the ultimate in aggressive styling, functionality and durability. Experience the trails and the road the way it was meant to be, with little to no rattles, open visibility and substantial security. Key Features and Benefits include Full Surround tubing, integrated Sun Visor, solid rattle resistant design.
|
The Rugged Ridge Spare Tire Delete Plate eliminates the factory spare tire carrier on 2007-2018 Wrangler JK models for reduced weight, greater rear visibility and improved departure angles when off-road driving. Stamped from brawny steel plate, precisely drilled to match the JK tailgate and given a black textured powder coat, each Spare Tire Delete Plate is engineered to look like a factory-quality part in both fit and finish. With seven pressed vent louvers and an eye-catching cutout logo, the Rugged Ridge Spare Tire Delete Plate is a serious styling upgrade for anyone who prefers the hardcore off-road image or simply runs a tire too large for conventional carry. The Spare Tire Delete Plate Kit includes a license plate and third brake light relocation bracket to complete the package. (Spare Tire Delete Plate available separately, use 11586.10)
|
Exclusively for the Jeep JL, The Fab Fours Front Full Tube Doors provides the ultimate aggressive styling, functionality and durability. Experience the trails and the road the way it was meant to be, with little to no rattles, open visibility and substantial security. Key Features and Benefits include Full Surround tubing, integrated Sun Visor, solid rattle resistant design. Optional Side Mirror Bracket (JK1032-1) (Supports OE Style JK Aftermarket Mirrors)
|
Tubular Design to provide strength and durability. Available with a 3" flare incorporated into the fender. Modifications to the front OE fender is required, finished in a black powder coat. Relocates factory latch to provide a finished look. Comes with stainless steel hardware.
Fits 1976 to 1986 CJ7
Black powder coat
3" flare
Modifications to the front OE fender is required
Relocates factory latch to provide a finished look
Comes with hardware
|
Tubular Design to provide strength and durability. Available with a 3" flare incorporated into the fender. Modifications to the front OE fender is required, finished in a black powder coat. Relocates factory latch to provide a finished look. Comes with stainless steel hardware.
Fits 1987 to 1995 YJ Wrangler
Black powder coat
Modifications to the front OE fender is required
Relocates factory latch to provide a finished look
Comes with hardware
Includes 2 front flares
|
These are black primer coated and additional preparation will be required prior to painting. *Will not fit Renegade models. Replacement steel body parts are sold AS IS. Some minor imperfections or damage can occur during shipping. Professional installation recommended. Claims for freight damage must be placed directly with freight carriers.
Fits 1987 to 1995 YJ Wrangler
Driver side front
Most factory holes predrilled
|
Smittybilt's all new XRC Armor Flat Armor Skins for Jeep JKs are manufactured from 3/16" cold roll steel, and are hand crafted to insure a perfect fit every time. Each Flat Skin comes complete with everything you need to install these guards on your Jeep, including stainless steel hardware and detailed installation instructions. They are finished in a tan coat and can be used with our XRC Armor Rocker Guards. FRONT - TAN Manufactured from 3/16" cold roll steel;Hand crafted to insure a perfect fit every time;Finished in a tan;Can be used with rock sliders
|
Smittybilt's all new XRC Armor Flat Armor Skins for Jeep JKs are manufactured from 3/16" cold roll steel, and are hand crafted to insure a perfect fit every time. Each Flat Skin comes complete with everything you need to install these guards on your Jeep, including stainless steel hardware and detailed installation instructions. They are finished in a tan coat and can be used with our XRC Armor Rocker Guards. REAR - TAN Manufactured from 3/16" cold roll steel;Hand crafted to insure a perfect fit every time;Finished in a tan;Can be used with rock sliders
|
Key Parts offers complete vehicle coverage for rust and collision panels. These panels are designed to replicate exact OEM fitment and offer increased coverage areas vs. the competitors. Painted parts are shipped in advanced black EDP coating, where chrome parts are triple nickel chromed to the highest quality. Think Key Parts for your fender, floor pan, rust repair, and all body panel needs!
|
|
|
|
|
Copyright © 1999-2021 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |