Whether you are a do it yourselfer working out of your garage, operate a small auto repair business, or taking care of equipment and engine repairs at the ranch or farm, your going to need a parts washer to remove the grease and grime from the engine components. You're going to need Black Bull 3.5 Gallon Portable Parts Washer.

This 5 gallon parts washer with a 3.5 gallon solvent capacity is small and easy to move. The pump can output up to 210 gallons per hour, and recirculates up to .3 gallons of solvent per hour. Safe and convenient to use, this parts washer features a fusible-link arm with steel lid, and a convenient removable tray with drainage holes that allow for quick drying and easy examination of parts.

• Removes grease, grime and oil from engine components, oil pans, carburetors and more
• Fully enclosed electric pump recirculates fluid for quick parts washing, small size is easily to transport
• Convenient removable tray with drainage holes
• Black powder coat paint finish
• Heavy-duty steel construction
• Flexible chrome plated nozzle adjusts for full coverage
• 5 gal. tank capacity / 3.5 gal. solvent capacity, 120 Volts / 60 Hz water pump, fusible link arm and steel lid
• Max. Pump output: 22 gph flow rate (with flexible pipe), max. Pump output: 210 gph flow rate (without flexible pipe), recirculates .3gpm of solvent
• Rated voltage 120 Volt / 60 Hz
• Overall dimensions: 18 in. W x 9 in. H x 13.5 in. D

Remove oxidation, paint and rust with the Black Bull 90 Lb Gravity Feed Abrasive Blaster. Designed for contractors and serious do-it-yourselfers, this steel sandblaster is an easy way for you to clean a variety of different surfaces including metal, wood, brick or concrete. This siphon feed sandblaster with steel hopper features a 90 lb capacity for approximately 150 minutes of blast time. A long 8 foot blast hose lets you get into out of the way and hard to reach places. Remove oxidation, paint and rust

• Includes 4 ceramic nozzles, 8 ft. x 3/8 in. blasting hose, pistol grip blast gun, and protective hood
• Heavy-duty all steel construction
• Gravity feed design
• 7.5 gal. tank size , 90 lbs. capacity
• 10 in. rubber wheels
• Maximum working pressure: 120 psi
• Air consumption: 7CFM @ 80 psi
• Use 80 grit or smaller diameter abrasive

Remove oxidation, paint and rust with the Black Bull 10 Gallon Abrasive Blaster. This steel sandblaster allows for a diverse amount of surfaces to be cleaned during a single blast time. Designed for contractors and serious do-it-yourselfers, this steel sandblaster is an easy way for you to clean a variety of different surfaces including metal, wood, brick or concrete. Features a 10 gallon tank capacity with shut-off valve.

• Includes everything you need to get started. Just connect to a compressor, put on safety gear and fill with abrasive sand.
• Easily remove paint, rust and oxidation
• 10-gallon tank with shut-off valve
• 65 to 125 psi, 6 to 25 CFM
• Moves 80-90 percent of air speed
• 6 in. rubber wheels
• Overall size: 13.8 in L x 16.5 in. W x 33.5 in. H

Don't dump the entire Parts Washer when the pump goes out. Just replace it with the Black Bull Replacement Parts Washer Pump. The universal design fits most make and parts washers, including Black Bull Parts Washers. Replacement pumps can only be used when submersed.Universal design

• Recirculates 4.4 gpm of solvent
• Submersible use only
• 120v / 60 hz 0.23 amp
• Replacement pump for 20 gallon parts washer