CHECK OUT OUR CLEARANCE ITEMS! HUGE SAVINGS!Click Here

 

XRC SPUD BRACE HINGE XRC SPUD BRACE HINGE
Online
$30.99 for Each
Retail $32.99
Mfr PN: 93-5436
Stock: 0
XRC SPUD BRACE HINGE
Online
$30.99 for Each
Retail $32.99
Mfr PN: 93-5436
Stock: 0

HARDWARE FOR 76651-02 HARDWARE FOR 76651-02
Online
$19.74 for Each
Retail $22.27
Mfr PN: 76651-02HDW
Stock: 30
Online
$19.74 for Each
Retail $22.27
Mfr PN: 76651-02HDW
Stock: 30

Smittybilt Pivot HD Tire Carrier for 07-15 Jeep Wrangler JK 2843 Smittybilt Pivot HD Tire Carrier for 07-15 Jeep Wrangler JK 2843
Online
$499.99 for Each
Retail $577.48
Mfr PN: 2843
Stock: 687
The Smittybilt SRC Oversize Tire Carrier is the most economical way to mount an oversized tire onto your Jeep Wrangler JK. UP TO 37IN TIRE Fits 2007 to 2017 JK Wrangler, Rubicon and Unlimited;2 and 4-door models;Strong monocoque aluminum construction eliminates tailgate sag;Adjustable tire mount with 37" maximum tire size;Increases load carrying capacity of 135 lbs;Forged chrome mounting brackets – 30% stronger than steel;Third brake light mount included;Protective EPDM gaskets included to protect factory finish;S/B2740-03 optional brackets to mount trail jack;Maintains the easy single action of opening and closing of the tailgate;No drilling required - you can maintain OE bumpers, if preferred
Online
$499.99 for Each
Retail $577.48
Mfr PN: 2843
Stock: 687

TIRE RELOCATION BRACKET TIRE RELOCATION BRACKET
Online
$59.99 for Each
Retail $63.79
Mfr PN: 3721
Stock: 532
Clear up to a 35" tire without the need of a tire carrier with the Tire Relocation Bracket from Smittybilt.Manufactured out of 1/4" plate. Installs directly to OE tire points. Finished in our Signature Series Two Stage Matte Black Finish Powdercoat. Fits 1976 to 2014 Wrangler and CJ Textured black Clear up to 35" tire
Online
$59.99 for Each
Retail $63.79
Mfr PN: 3721
Stock: 532

SRC Classic Tire Carrier ONLY, No Bumper SRC Classic Tire Carrier ONLY, No Bumper
Online
$196.76 for Each
Mfr PN: 76651-02
Stock: 303
The Smittybilt Classic SRV Rear Bumper is as tough as it is practical, as is seen in the 1/4" steel plate design, intuitive mounting system to carry an oversized spare tire. The SRC Classic rear bumper is powder coated in our signature textured finish. Zinc Undercoated Dual Stage Textured Powdercoat for long life. Heavy Duty 1/4" steel plate design. Heavy duty latch mechanism keeps your tire secure. Custom grease fitting keeps hinge clean and smooth after years of use. 3 point tire mounting system supports oversized tires. Requires #S/B76651-01 to be mounted. Fits 1987 to 2006 Wrangler, Rubicon and Unlimited SRC Tire Carrier Black Textured No Drill Installation
Online
$196.76 for Each
Mfr PN: 76651-02
Stock: 303

Smittybilt TRAIL JACK MOUNT 2844 Smittybilt TRAIL JACK MOUNT 2844
Online
$90.92 for Each
Retail $93.49
Mfr PN: 2844
Stock: 151
Smittybilt has expanded its product offering to over 2,000 different products servicing the international truck and SUV markets. The constant involvement of management in the off-road markets has kept Smittybilt in touch with the latest market trends and on the forefront of engineering and design. Welcome to the new Smittybilt where innovation and quality are once again at the forefront of product development. "Get the Original", Get Smittybilt! ONLY FOR USE WITH 2843 Fits 2007 to 2017 JK Wrangler, Rubicon and Unlimited;2 and 4-door models;Fits Pivot HD Tire Carrier, part number S/B2843;Black powder coat finish;No drill installation;To be used with part # S/B2843
Online
$90.92 for Each
Retail $93.49
Mfr PN: 2844
Stock: 151

JK FRAME MOUNTED TC JK FRAME MOUNTED TC
Online
$1135.56 for Each
Retail $1198.44
Mfr PN: 17-62-030TP1
Stock: 133
Poison Spyders JK Frame Mounted Tire Carrier is the ultimate combination of strength, ease of use, high clearance and great looks. It attaches directly to the strongest structure on the Jeep: the frame. This removes the weight and stresses of large, heavy spare tires and wheels from the Jeeps tailgate, body tub, and bumper. The single-action opening is the pinnacle of convenience, requiring only a single hand to open the tailgate and tire carrier in tandem. The concealed pivot tucks in closer to the Jeeps body than previous Poison Spyder tire carriers, providing better clearances on the trail. This carrier is compatible with Poison Spyder Bruiser Crawler and RockBrawler II* series rear bumpers, and can be added later. The SpyderShell Armor Coat finish carries a 5 year warranty. Frame Mounted For Strength - Frame mounting provides the ultimate strength for a pivoting spare tire mount on Jeeps. Body mounted tire carriers place the weight and stress of the spare tire on the Jeeps tailgate and/or body. Bumper-mounted tire carriers are better, switching those forces to the bumper, which is in turn bolted to the frame. But the ultimate strategy is to go right to the source of the Jeeps structural integrity: bolt it right to the frame. The Poison Spyder JK Body Mounted Tire Carrier does just that, using a triangulated mounting bracket that secures to the Jeeps frame rail and rear crossmember in three planes. Single-Action-Opening - The Frame Mounted Tire Carriers Single-Action-Opening feature is a huge convenience for when you're trying to open the tailgate and tire carrier with one hand, when you've got an armload of gear or groceries in the other. Rather than latching to itself, the Frame Mounted Tire Carrier is tethered to the tailgate so that they open and close in tandem. A custom designed tie-rod assembly, bumper mechanism and tailgate plate keep the two pieces perfectly aligned when open, but tight and rattle-free when closed. *Multiple Bumper Compatibility - The JK Frame Mounted Tire Carrier is compatible with Poison Spyder Bruiser and Crawler series rear bumpers. This provides an upgrade path for Jeep owners who wish to purchase the bumper first, and then upgrade to the tire carrier at a later date. The tire carrier may be added later, without needing to replace or alter the Bruiser or Crawler series bumper (removal of the bumper is required during installation of the tire carrier). The JK Frame Mounted Tire Carrier is also compatible with previous generation RockBrawler II series rear bumpers that were originally purchased without an integrated tire carrier (some DIY modifications required). The Frame Mounted Tire Carrier may also be installed without any bumper at all, if the owner chooses. Concealed Heavy Duty Pivot - The Body Mounted Tire Carrier uses an extreme duty pivot assembly that is located below the deck of the rear bumper, to allow the tire carrier to be tucked in closer to the Jeeps body tub and provide better off-road clearances. The pivot assembly includes a precision CNC machined spindle and housing, with a pair of high quality Timken tapered roller bearings to provide smooth operation under the heaviest loads Spindle seals keep your lubrication in, and dirt and water out. Fabricated Plate Steel Construction: The tire carrier swing is fabricated entirely from CNC laser cut, precision brake-formed plate steel. The pieces are expertly welded together in a specially designed assembly fixture to ensure consistent fit and quality. A web gusset design is cut into the corner of the tire carrier to provide a little Poison Spyder flare. 2-Way Adjustable Tire Mount - The tire mount is adjustable up and down, as well as in and out, to accommodate a wide variety of tire sizes up to 40". The adjust-ability allows the tire to be mounted as low as possible for any tire size, to keep a low center of gravity. The wheel mounting plate includes lug stud holes for a variety of wheel bolt patterns, including the JKs stock pattern 5x5" (also includes 5x4.5", 5x5.5", 6x5.5" and 8x6.5"). License Plate Relocation Mount - The included license plate mount places the license plate at the center of the spare tire, for those who choose to move it there. If relocating the license plate, our License Plate Delete Cover and LED License Plate & 3rd Brake Light (each sold separately) will be useful in completing the relocation. The tire carrier assembly includes tie-in loops along the cable-way, to secure the wiring for any license plate light, third brake light, or backup camera you choose to install. SpyderShell™ Armor Coat - SpyderShell™ is more than just powder coating—its a complete system that includes the state of the art in preparation, application, materials and packaging to ensure that your SpyderShell™ products stay looking great for years. The SpyderShell™ process has been engineered to provide your Poison Spyder product with years of unmatched great looks, corrosion protection and weather-resistance. Our proprietary 6-stage system starts with media blasting the entire part, to remove contaminants and prep the metal surface for the best possible adhesion. Next, any seams are sealed with 3M Scotch-Weld to block moisture from entering and causing corrosion where the powder can not reach. The first coat to be applied is a zinc-rich powdered black primer, which is baked on to form an impenetrable bond between the metal product and the coating. The primer is black--rather than traditional gray--so that any rock chips or trail damage are less conspicuous. The final top coat is an industrial grade, "super-durable" architectural finish in semi-gloss black, which is engineered to retain its appearance through years of exposure to sun and weather. SpyderShell is a coating process unmatched by any other Jeep armor aftermarket manufacturer, for which we are confident in offering a 5-year warranty on materials and workmanship. Optional Hi-Lift Jack Mount - A custom Hi-Lift Jack Mount, available separately, is CNC laster cut and bolts to the top of the tire carrier. It features a distinctive web design to match the corner gusset detail on the RockBrawler™ II Tire Carrier, and mounts the Hi-Lift jack above and forward of the spare tire to keep it tucked up and away until needed. Future Accessory Upgrade Possibilities Built-In - Along each surface of the tire carrier weave built in threaded mounting holes for future upgrades. While Poison Spyder may release additional accessories for the tire carrier at a future date, DIYers may find these mounting holes handy for attaching home-built brackets and mounts for accessories of their own choosing. Some suggestions might be alternate mounting for a Hi-Lift jack, fuel can or Rotopax mounts, coolers, hunting racks, tool boxes, etc.
Online
$1135.56 for Each
Retail $1198.44
Mfr PN: 17-62-030TP1
Stock: 133

XRC JK ATLAS TIRE CARRIER ONLY XRC JK ATLAS TIRE CARRIER ONLY
Online
$399.25 for Each
Mfr PN: 76896-02
Stock: 76
Includes mounting locations for your jerry can and lift jack (Jack and Hi-lift are not included) and a 3rd brake light mounting bracket. TIRE CARRIER ONLY Fits 2007 to 2017 JK Wrangler, Rubicon and Unlimited;2 and 4-door models;XRC AtlasTire Carrier; Black;Spare tire carrier ONLY;Bumper not included
Online
$399.25 for Each
Mfr PN: 76896-02
Stock: 76

Poison Spyder Customs JK TIRE CARRIER 2 OF 2 17-62-020T Poison Spyder Customs JK TIRE CARRIER 2 OF 2 17-62-020T
Online
$989.66 for Each
Retail $1095.58
Mfr PN: 17-62-020T
Stock: 54
JK TIRE CARRIER 2 OF 2
Online
$989.66 for Each
Retail $1095.58
Mfr PN: 17-62-020T
Stock: 54

Smittybilt CROSSBAR BRACKET KIT D8081 Smittybilt CROSSBAR BRACKET KIT D8081
Online
$138.99 for Each
Retail $153.27
Mfr PN: D8081
Stock: 43
Four-piece kit made of CNC-machined steel;Fits all Defender by Smittybilt racks;Can be use to attach Yakima- or Thule-type accessories;Easy installation
Online
$138.99 for Each
Retail $153.27
Mfr PN: D8081
Stock: 43

3-Way Spare Tire Strap 3-Way Spare Tire Strap
Online
$82.92 for Each
Retail $105.58
Mfr PN: 57-63-001
Stock: 42
The Poison Spyder 3-Way Spare Tire Strap securely holds the spare tire in place during the most rigorous four-wheeling. This strap was designed for use with the Poison Spyder Rear Stinger Tire Carrier, but can be used with other DIY-fabricated spare tire mounts or to simply tie the spare tire down into the bed of the vehicle. The use of a strap allows virtually infinite adjustability for any size tire, while allowing quick, easy access to the spare tire without having to use any extra tools. All of these reasons are why similar straps are routinely used for spare tire hold-down duty in off-road racing. Heavy duty ratchet lets you easily adjust, tighten and release tension. Made of high quality nylon webbing with an embroidered Poison Spyder tag.
Online
$82.92 for Each
Retail $105.58
Mfr PN: 57-63-001
Stock: 42

Smittybilt SLANT BACK TIRE MOUNT 76857-05 Smittybilt SLANT BACK TIRE MOUNT 76857-05
Online
$178.70 for Each
Mfr PN: 76857-05
Stock: 38
Spare tire carriers in their conventional, upright positions are a necessity for every Jeeper, whether on the road or off. But when the terrain gets extreme and your standard hard top comes off, the Slant Back Tire Carrier Kit allows you to move your spare tire into an aggressive, 45° pre-runner position. Spare tires mounted with the slant do not interfere with Smittybilt’s Cargo Restraint System (C.RES) or JK Bowless Tops. Manufactured from 3/16 inch cold-rolled steel;Two-stage matte black finish; Features Rotopax gas/water can mount and off-road jack mount; Acccomodtes up to 37" tire; Works with our Smittybilt Bowless Tops; Can be converted between a straight and slant configuration; Fits XRC/SRC Gen2 Tire Carrier or Pivot HD Tire Carrier
Online
$178.70 for Each
Mfr PN: 76857-05
Stock: 38

Recovery Rear Bumper with Swing Away Tire Carrier Recovery Rear Bumper with Swing Away Tire Carrier
Online
$945.99 for Each
Retail $1150.99
Mfr PN: 88606
Stock: 24
Rampage recovery bumpers - day or night, this lighted tough bumper gives the off-road enthusiast some serious protection! Engineered for off-road use and rock crawling abuse! Custom welded shackle mounts with 3/4" clevis d-rings included. Heavy-duty bumper features protective dual stage, durable powder-coat finish and a 3/16" steel plate design with two 4" light openings for a custom look. Recovery bumper has two 4" light receptacles – lights SOLD SEPARATELY. Can be used with or without a hitch - does not work with the factory hitch. To mount a hitch you will need #RPP86611. Fits 2007 to 2014 JK Wrangler, Rubicon and Unlimited 2 and 4-door models Rear Textured black finish Lights SOLD SEPARATELY Does not work with the factory hitch Receiver hitch is SOLD SEPARATELY #RPP86611
Online
$945.99 for Each
Retail $1150.99
Mfr PN: 88606
Stock: 24

JL FRAME MOUNTED TC JL FRAME MOUNTED TC
Online
$1238.29 for Each
Mfr PN: 19-62-031TP1
Stock: 22
The new Frame-Mounted Tire Carrier with Camera Mount attachesdirectly to the strongest section of the Jeep—the frame rail andcrossmember. It functions just like Poison Spyder's current RockBrawler II bumper-integrated tire carriers, in that it opens along with thetailgate in one easy, single-handed movement. The new tire carrieris compatible with either the Crawler or Bruizer series rear bumpers,or can be installed with no bumper at all. This provides an upgradepath for Jeep owners who would like to purchase the bumper oftheir choice first, and upgrade to the tire carrier at a later date. 2-Way Adjustable Tire Mount - The tire mount is adjustable up and down, as well as in and out, to accommodate a wide variety of tire sizes up to 40 inches. The adjust-ability allows the tire to be mounted as low as possible for any tire size, to keep a low center of gravity. The wheel mounting plate includes lug stud holes for a variety of wheel bolt patterns, including the JLs stock pattern 5x5 inch (also includes 5x4.5, 5x5.5, 6x5.5 and 8x6.5). License Plate Relocation Mount - The included license plate mount places the license plate at the center of the spare tire, for those who choose to move it there.
Online
$1238.29 for Each
Mfr PN: 19-62-031TP1
Stock: 22

TIRE CARRIER BASE TIRE CARRIER BASE
Online
$29.48 for Each
Retail $43.31
Mfr PN: 76410-02
Stock: 21
Online
$29.48 for Each
Retail $43.31
Mfr PN: 76410-02
Stock: 21

Oversized Tire Carrier Oversized Tire Carrier
Online
$150.37 for Each
Retail $170.49
Mfr PN: 2743
Stock: 20
The Smittybilt Oversize Tire Mount is the most economical way to mount an oversized tire onto your 2007-2010 JK Wrangler. Attaches to the factory tailgate using the existing holes and requires no drilling or modifications. Completely adjustable and designed to mount up to a 37" tire or up to 195 lbs. Engineered to integrated with existing tailgate and works as one solid unit. Carrier and tailgate open and close as a single unit. Adjustable arm eliminates tailgate sag. Comes in a signature series matte black textured finish. Fits 2007 to 2014 JK Wrangler, Rubicon and Unlimited 2 and 4-door models Textured black finish Attaches to the factory tailgate Holds up to a 37" tire Adjustable arm eliminates tailgate sag Designed to use a pad lock for security
Online
$150.37 for Each
Retail $170.49
Mfr PN: 2743
Stock: 20

GLIDE BLOCK GLIDE BLOCK
Online
$10.84 for Each
Retail $11.99
Mfr PN: 76651-02GLIDEBLK
Stock: 18
Online
$10.84 for Each
Retail $11.99
Mfr PN: 76651-02GLIDEBLK
Stock: 18

Smittybilt 3 Inch Rear Tube Bumper with Hitch in Textured Black Finish JB44-RHT Smittybilt 3 Inch Rear Tube Bumper with Hitch in Textured Black Finish JB44-RHT
Online
$247.77 for Each
Retail $250.85
Mfr PN: JB44-RHT
Stock: 16
Smittybilt Tubular Jeep Bumpers are custom crafted to fit your Jeep. They gain their strength from durable stainless steel and a 1-piece design, plus boast pre-cut vertical uprights for a little flair. And, these bumpers are robotically welded for extreme durability on the road or off. Plus, Smittybilt Tubular Jeep Bumpers are available for the front and rear. The rear bumper even includes an added tow hitch receiver with a 2000 lb towing weight. 87-06 YJ/TJ/LJ Fits 1987 to 2006 Wrangler, Rubicon and Unlimited;Dual textured black powdercoat painted finish;Dense zinc treated undercoating;Expertly robotically welded;Bumper bolts directly on to vehicle;2" receiver hitch;5 year limited warranty
Online
$247.77 for Each
Retail $250.85
Mfr PN: JB44-RHT
Stock: 16

Online
$31.86 for Each
Retail $47.80
Mfr PN: 4838210
Stock: 14

HARDWARE FOR 2743 HARDWARE FOR 2743
Online
$10.01 for Each
Retail $11.72
Mfr PN: 2743HDW
Stock: 7
HARDWARE FOR 2743
Online
$10.01 for Each
Retail $11.72
Mfr PN: 2743HDW
Stock: 7

Smittybilt MOD BRUSH GUARD USE WITH 76825 ONLY 76821 Smittybilt MOD BRUSH GUARD USE WITH 76825 ONLY 76821
Online
$270.57 for Each
Retail $281.14
Mfr PN: 76821
Stock: 6
The JK XRC M.O.D. (Multi Optional Design) Bumper System allows you to design your bumper for any terrain. The low profile bull bar protects your winch from trail obstacles and looks great on the front of your Jeep. When you purchase this part you will only receive the Bull Bar, this does not include the Modular Center Section bumper. To purchase the Bumper Center Section, look at part #S/B76825. USE WITH 76825 ONLY Fits 2007 to 2017 JK Wrangler, Rubicon and Unlimited;2 and 4-door models;Two stage textured matte black finish;Manufactured from 3/16" cold rolled steel;Marine grade stainless steel hardware;Brush guard only;This is not the complete bumper
Online
$270.57 for Each
Retail $281.14
Mfr PN: 76821
Stock: 6

Smittybilt I-RACK II-MOUNTIING SYS UNIVERSAL 2739 Smittybilt I-RACK II-MOUNTIING SYS UNIVERSAL 2739
Online
$163.25 for Each
Retail $170.49
Mfr PN: 2739
Stock: 5
Smittybilt’s iRack II is a smart choice for outdoors enthusiasts and can accommodate a wide variety of trail gear with efficiency and ease. The “I” in iRack stands for intelligent and the latest addition continues the tradition of supplying knowledgeable outdoorsmen and women with the superb accessories they seek for taming the great outdoors. The iRack II custom mounts to any spare tire up to 40 inches using heavy duty straps and has storage capacity for gear ranging from Jerry cans to Molle Pals Pouches to Trail or High-Lift Jacks. Multiple attachment points allow owners to carry whatever they need to have it accessible whenever they need it on the trail. Out on the trail, drivers crave long-lasting products they can trust to get the job done. Improving on Smittybilt’s inaugural iRack design, the iRack II is manufactured from 3/16 inch thick, cold-rolled steel, and is powder coated textured black for protection. This ensures the rack will maintain durability with minimal wear and tear issues over its lifespan. UNIVERSAL Universal;Black;Can be used with up to a 40” tire;Let’s you mount variable items to the back of your Jeep;Custom mounting straps included;Accessory mounts not included
Online
$163.25 for Each
Retail $170.49
Mfr PN: 2739
Stock: 5

Screw, Spare Tire Carrier Mounting; 87-06 Wrangler Screw, Spare Tire Carrier Mounting; 87-06 Wrangler
Online
$1.50 for Each
Retail $2.99
Mfr PN: 17258.09
Stock: 5
Is your factory spare tire carrier loose? You might be missing one or more bolts. These factory bolts are sometimes hard to find in a regular hardware store. Rely on Omix-ADA for a factory replacement. Our OE factory direct fit replacement parts do the job every single time.
Online
$1.50 for Each
Retail $2.99
Mfr PN: 17258.09
Stock: 5

TIRE CARRIER TIRE CARRIER
Online
$372.28 for Each
Mfr PN: TCJL-01
Stock: 4
The DV8 Offroad TCJL-01 replaces the weakest link on the OEM spare tire mounting system, unlike Jeeps of the past the JL features a cast steel internal tailgate structure. This means that it is much stronger and more capable of handling heavier loads. The DV8 TCJL-01 replaces the factory bracket that connects the spare to the tailgate itself. It also makes the mounting system adjustable to accommodate up to a 35 inch tire and wheel combo.
Online
$372.28 for Each
Mfr PN: TCJL-01
Stock: 4

SPARE TIRE MOUNT SPARE TIRE MOUNT
Online
$86.78 for Each
Retail $112.92
Mfr PN: 87400-05
Stock: 3
Online
$86.78 for Each
Retail $112.92
Mfr PN: 87400-05
Stock: 3

Spare Tire Spacer; 76-16 Jeep CJ/Wrangler YJ/TJ/JK Spare Tire Spacer; 76-16 Jeep CJ/Wrangler YJ/TJ/JK
Online
$54.99 for Each
Retail $79.19
Mfr PN: 11585.02
Stock: 2
Get more clearance for your aftermarket or oversized tires and wheels without purchasing a complete bumper and tire carrier. Fits multiple bolt patterns allowing you to transfer this spacer from vehichle to vehichle. Fits 1976 to 2014 Wrangler and CJ Black powder coat Provides extra clearance for larger tires
Online
$54.99 for Each
Retail $79.19
Mfr PN: 11585.02
Stock: 2

Spare Tire Carrier Spare Tire Carrier
Online
$605.40 for Each
Retail $665.60
Mfr PN: TT-Y1351T-1
Stock: 2
Fab Fours Inc., the worlds leading bumper manufacturer, is dedicated to pushing the boundaries of innovation and design. Fab Fours was built on a simple foundation, "Quality…Delivered On Time." This is the principal behind every performance product that we manufacture. Fits 2005 to 2012 Toyota Tacoma 2 Stage Black powder coated
Online
$605.40 for Each
Retail $665.60
Mfr PN: TT-Y1351T-1
Stock: 2

TIRE CARRIER PIVOT SHAFT TIRE CARRIER PIVOT SHAFT
Online
$158.65 for Each
Retail $175.99
Mfr PN: 93-2997
Stock: 1
Online
$158.65 for Each
Retail $175.99
Mfr PN: 93-2997
Stock: 1

TIRE GATE HINGE (PAIR) TIRE GATE HINGE (PAIR)
Online
$62.46 for Each
Retail $93.31
Mfr PN: 76410-04
Stock: 1
Online
$62.46 for Each
Retail $93.31
Mfr PN: 76410-04
Stock: 1

Smittybilt 3 Inch Rear Tube Bumper with Hitch in Black Powder Coat JB44-RH Smittybilt 3 Inch Rear Tube Bumper with Hitch in Black Powder Coat JB44-RH
Online
$261.44 for Each
Retail $268.37
Mfr PN: JB44-RH
Stock: 1
Smittybilt Tubular Jeep Bumpers are custom crafted to fit your Jeep. They gain their strength from durable stainless steel and boast pre-cut vertical uprights for a little flair. And, these bumpers are robotically welded for extreme durability on the road or off. Plus, Smittybilt Tubular Jeep Bumpers are available for the front and rear. The rear bumper even includes an added tow hitch receiver with a 2000 lb towing weight. 87-06 YJ/TJ/LJ Fits 1987 to 2006 Wrangler, Rubicon and Unlimited;Dual gloss black powdercoat painted finish;Dense zinc treated undercoating;Expertly robotically welded;Bumper bolts directly on to vehicle;2" receiver hitch;5 year limited warranty
Online
$261.44 for Each
Retail $268.37
Mfr PN: JB44-RH
Stock: 1

Smittybilt 3 Inch Rear Tube Bumper with Hitch in Stainless Steel JB44-RHS Smittybilt 3 Inch Rear Tube Bumper with Hitch in Stainless Steel JB44-RHS
Online
$371.56 for Each
Retail $385.06
Mfr PN: JB44-RHS
Stock: 1
Smittybilt Tubular Jeep Bumpers are custom crafted to fit your Jeep. They gain their strength from durable stainless steel and a 1-piece design, plus boast pre-cut vertical uprights for a little flair. And, these bumpers are robotically welded for extreme durability on the road or off. Plus, Smittybilt Tubular Jeep Bumpers are available for the front and rear. The rear bumper even includes an added tow hitch receiver with a 2000 lb towing weight. 87-06 YJ/TJ/LJ Fits 1987 to 2006 Wrangler, Rubicon and Unlimited;Stainless steel;Expertly robotically welded;2" receiver hitch;Bumper bolts directly on to vehicle;5 year limited warranty
Online
$371.56 for Each
Retail $385.06
Mfr PN: JB44-RHS
Stock: 1

HD WHEEL MOUNT JL HD WHEEL MOUNT JL
Online
$175.99 for Each
Retail $175.99
Mfr PN: 11546.57
Stock: 1
The Spartacus HD Tire Carrier Wheel Mount for Wrangler JL features sturdy, fully-welded steel construction that distributes weight evenly across a broad footprint. Adjustable mounting brackets permits angled positioning of the spare, easing access to rear lift gate while gaining additional bumper clearance. Each wheel mount is finished in a tough stain black powder coat for long-lasting corrosion resistance and clean appearance and includes brackets to reposition back-up cameras and 3rd brake lights. Simple bolt-on installation, no drilling required. It’s the perfect addition to the Spartacus HD Tire Carrier Hinge Casting (11546.56) for a total tire carrier solution.
Online
$175.99 for Each
Retail $175.99
Mfr PN: 11546.57
Stock: 1

Don't Miss a Deal or Special Offer!
Get Email Savings and Updates:

About Us   Contact Us   Customer Service & Policies   Merchant Service   Privacy Statement   Customer Feedback  Return Policy

Copyright © 1999-2021 BuilderDepot, Inc.
Site Designed and Maintained by Inline Internet Systems, Inc.