CHECK OUT OUR CLEARANCE ITEMS! HUGE SAVINGS!Click Here

 
 
  1. Home:
  2. showbrand
 

Shop by Brand: MILWAUKEE ELECTRIC TOOL

Items 1- 32 of 287 total

MILWAUKEE 3-FLAT SECURE-GRIP™ HAMMER-DRILL BIT 1/2 IN. X 4-1/2 IN. X 6 IN. MILWAUKEE 3-FLAT SECURE-GRIP™ HAMMER-DRILL BIT 1/2 IN. X 4-1/2 IN. X 6 IN.
Online
$36.68for 3 Each
Retail $55.02
Mfr PN: 48-20-8830
Stock: 0
| Ideal for corded and cordless hammer drills with keyed or keyless chucks | Hex shanks for more secure chuck grip | Ideal for masonry, brick, block, softer aggregate concretes, etc. | Use with hammer drills that have a 3 jaw chuck | Size noted below is diameter x useable length x overall length | #811007 is a 2 pack
Online
$36.68for 3 Each
Retail $55.02
Mfr PN: 48-20-8830
Stock: 0

MILWAUKEE 3-FLAT SECURE-GRIP™ HAMMER-DRILL BIT 1/4 IN. X 2 IN. X 4 IN. MILWAUKEE 3-FLAT SECURE-GRIP™ HAMMER-DRILL BIT 1/4 IN. X 2 IN. X 4 IN.
Online
$35.33for 10 Each
Retail $52.99
Mfr PN: 48-20-8810
Stock: 0
Milwaukee's 3-Flat Secure-Grip™ Hammer-Drill Bits provide superiority in regards to quality, performance and longevity of life. The 3-Flat Secure-Grip™ shank is designed to fit in all 1/2 in. three jaw hammer-drill chucks and reduces the possibility of the bit spinning in the chuck during heavy torsional loads. The bits drill faster and last longer than other hammer-drill bits on the market due to their reinforced flute geometry and carbide tip design. Milwaukee's offering has a range of diameters from 1/8 in. to 1 in. with lengths up to 18 in. One per package.
Online
$35.33for 10 Each
Retail $52.99
Mfr PN: 48-20-8810
Stock: 0

MILWAUKEE 3-FLAT SECURE-GRIP™ HAMMER-DRILL BIT 1/4 IN. X 4-1/2 IN. X 6 IN. MILWAUKEE 3-FLAT SECURE-GRIP™ HAMMER-DRILL BIT 1/4 IN. X 4-1/2 IN. X 6 IN.
Online
$35.18for 7 Each
Retail $52.77
Mfr PN: 48-20-8811
Stock: 0
| Ideal for corded and cordless hammer drills with keyed or keyless chucks | Hex shanks for more secure chuck grip | Ideal for masonry, brick, block, softer aggregate concretes, etc. | Use with hammer drills that have a 3 jaw chuck | Size noted below is diameter x useable length x overall length | #811007 is a 2 pack
Online
$35.18for 7 Each
Retail $52.77
Mfr PN: 48-20-8811
Stock: 0

MILWAUKEE 3-FLAT SECURE-GRIP™ HAMMER-DRILL BIT 1/8 IN. X 1-1/2 IN. X 3 IN. 2 PACK MILWAUKEE 3-FLAT SECURE-GRIP™ HAMMER-DRILL BIT 1/8 IN. X 1-1/2 IN. X 3 IN. 2 PACK
Online
$38.96for 6 Each
Retail $58.44
Mfr PN: 48-20-8800
Stock: 0
Milwaukee's 3-Flat Secure-Grip™ Hammer-Drill Bits provide superiority in regards to quality, performance and longevity of life. The 3-Flat Secure-Grip™ shank is designed to fit in all 1/2 in. three jaw hammer-drill chucks and reduces the possibility of the bit spinning in the chuck during heavy torsional loads. The bits drill faster and last longer than other hammer-drill bits on the market due to their reinforced flute geometry and carbide tip design. Milwaukee's offering has a range of diameters from 1/8 in. to 1 in. with lengths up to 18 in. Two per package.
Online
$38.96for 6 Each
Retail $58.44
Mfr PN: 48-20-8800
Stock: 0

MILWAUKEE 3-FLAT SECURE-GRIP™ HAMMER-DRILL BIT 3 PIECE KIT MILWAUKEE 3-FLAT SECURE-GRIP™ HAMMER-DRILL BIT 3 PIECE KIT
Online
$33.76for 2 Each
Retail $50.64
Mfr PN: 48-20-8850
Stock: 0
Milwaukee's 3-Flat Secure-Grip™ Hammer-Drill Bits provide superiority in regards to quality, performance and longevity of life. The 3-Flat Secure-Grip™ shank is designed to fit in all 1/2 in. three jaw hammer-drill chucks and reduces the possibility of the bit spinning in the chuck during heavy torsional loads. The bits drill faster and last longer than other hammer-drill bits on the market due to their reinforced flute geometry and carbide tip design. Milwaukee's offering has a range of diameters from 1/8 in. to 1 in. with lengths up to 18 in. One per package.
Online
$33.76for 2 Each
Retail $50.64
Mfr PN: 48-20-8850
Stock: 0

MILWAUKEE 3-FLAT SECURE-GRIP™ HAMMER-DRILL BIT 3/16 IN. X 2 IN. X 4 IN. 2 PACK MILWAUKEE 3-FLAT SECURE-GRIP™ HAMMER-DRILL BIT 3/16 IN. X 2 IN. X 4 IN. 2 PACK
Online
$35.26for 5 Each
Retail $52.89
Mfr PN: 48-20-8805
Stock: 0
Milwaukee's 3-Flat Secure-Grip™ Hammer-Drill Bits provide superiority in regards to quality, performance and longevity of life. The 3-Flat Secure-Grip™ shank is designed to fit in all 1/2 in. three jaw hammer-drill chucks and reduces the possibility of the bit spinning in the chuck during heavy torsional loads. The bits drill faster and last longer than other hammer-drill bits on the market due to their reinforced flute geometry and carbide tip design. Milwaukee's offering has a range of diameters from 1/8 in. to 1 in. with lengths up to 18 in. Two per package.
Online
$35.26for 5 Each
Retail $52.89
Mfr PN: 48-20-8805
Stock: 0

MILWAUKEE 3-FLAT SECURE-GRIP™ HAMMER-DRILL BIT 3/16 IN. X 4-1/2 IN. X 6 IN., 2 PACK MILWAUKEE 3-FLAT SECURE-GRIP™ HAMMER-DRILL BIT 3/16 IN. X 4-1/2 IN. X 6 IN., 2 PACK
Online
$37.60for 5 Pack
Retail $56.40
Mfr PN: 48-20-8806
Stock: 0
| Ideal for corded and cordless hammer drills with keyed or keyless chucks | Hex shanks for more secure chuck grip | Ideal for masonry, brick, block, softer aggregate concretes, etc. | Use with hammer drills that have a 3 jaw chuck | Size noted below is diameter x useable length x overall length | #811007 is a 2 pack
Online
$37.60for 5 Pack
Retail $56.40
Mfr PN: 48-20-8806
Stock: 0

MILWAUKEE 3-FLAT SECURE-GRIP™ HAMMER-DRILL BIT 3/8 IN. X 10 IN. X 12 IN. MILWAUKEE 3-FLAT SECURE-GRIP™ HAMMER-DRILL BIT 3/8 IN. X 10 IN. X 12 IN.
Online
$37.80for 5 Each
Retail $60.72
Mfr PN: 48-20-8822
Stock: 0
Milwaukee's 3-Flat Secure-Grip™ Hammer-Drill Bits provide superiority in regards to quality, performance and longevity of life. The 3-Flat Secure-Grip™ shank is designed to fit in all 1/2 in. three jaw hammer-drill chucks and reduces the possibility of the bit spinning in the chuck during heavy torsional loads. The bits drill faster and last longer than other hammer-drill bits on the market due to their reinforced flute geometry and carbide tip design. Milwaukee's offering has a range of diameters from 1/8 in. to 1 in. with lengths up to 18 in. One per package.
Online
$37.80for 5 Each
Retail $60.72
Mfr PN: 48-20-8822
Stock: 0

MILWAUKEE 3-FLAT SECURE-GRIP™ HAMMER-DRILL BIT 3/8 IN. X 4-1/2 IN. X 6 IN. MILWAUKEE 3-FLAT SECURE-GRIP™ HAMMER-DRILL BIT 3/8 IN. X 4-1/2 IN. X 6 IN.
Online
$33.76for 4 Each
Retail $50.64
Mfr PN: 48-20-8821
Stock: 0
| Ideal for corded and cordless hammer drills with keyed or keyless chucks | Hex shanks for more secure chuck grip | Ideal for masonry, brick, block, softer aggregate concretes, etc. | Use with hammer drills that have a 3 jaw chuck | Size noted below is diameter x useable length x overall length | #811007 is a 2 pack
Online
$33.76for 4 Each
Retail $50.64
Mfr PN: 48-20-8821
Stock: 0

MILWAUKEE 3-FLAT SECURE-GRIP™ HAMMER-DRILL BIT 5 PIECE KIT MILWAUKEE 3-FLAT SECURE-GRIP™ HAMMER-DRILL BIT 5 PIECE KIT
Online
$61.28for 2 Each
Retail $91.92
Mfr PN: 48-20-8851
Stock: 0
Milwaukee's 3-Flat Secure-Grip™ Hammer-Drill Bits provide superiority in regards to quality, performance and longevity of life. The 3-Flat Secure-Grip™ shank is designed to fit in all 1/2 in. three jaw hammer-drill chucks and reduces the possibility of the bit spinning in the chuck during heavy torsional loads. The bits drill faster and last longer than other hammer-drill bits on the market due to their reinforced flute geometry and carbide tip design. Milwaukee's offering has a range of diameters from 1/8 in. to 1 in. with lengths up to 18 in. One per package.
Online
$61.28for 2 Each
Retail $91.92
Mfr PN: 48-20-8851
Stock: 0

MILWAUKEE 3-FLAT SECURE-GRIP™ HAMMER-DRILL BIT 5/16 IN. X 4-1/2 IN. X 6 IN. MILWAUKEE 3-FLAT SECURE-GRIP™ HAMMER-DRILL BIT 5/16 IN. X 4-1/2 IN. X 6 IN.
Online
$35.26for 5 Each
Retail $52.89
Mfr PN: 48-20-8816
Stock: 0
| Ideal for corded and cordless hammer drills with keyed or keyless chucks | Hex shanks for more secure chuck grip | Ideal for masonry, brick, block, softer aggregate concretes, etc. | Use with hammer drills that have a 3 jaw chuck | Size noted below is diameter x useable length x overall length | #811007 is a 2 pack
Online
$35.26for 5 Each
Retail $52.89
Mfr PN: 48-20-8816
Stock: 0

MILWAUKEE 3-FLAT SECURE-GRIP™ HAMMER-DRILL BIT 5/32 IN. X 4 IN. X 6 IN. 2 PACK MILWAUKEE 3-FLAT SECURE-GRIP™ HAMMER-DRILL BIT 5/32 IN. X 4 IN. X 6 IN. 2 PACK
Online
$35.26for 5 Each
Retail $52.89
Mfr PN: 48-20-8801
Stock: 0
Milwaukee's 3-Flat Secure-Grip™ Hammer-Drill Bits provide superiority in regards to quality, performance and longevity of life. The 3-Flat Secure-Grip™ shank is designed to fit in all 1/2 in. three jaw hammer-drill chucks and reduces the possibility of the bit spinning in the chuck during heavy torsional loads. The bits drill faster and last longer than other hammer-drill bits on the market due to their reinforced flute geometry and carbide tip design. Milwaukee's offering has a range of diameters from 1/8 in. to 1 in. with lengths up to 18 in. Two per package.
Online
$35.26for 5 Each
Retail $52.89
Mfr PN: 48-20-8801
Stock: 0

MILWAUKEE 3-FLAT SECURE-GRIP™ HAMMER-DRILL BIT 5/8 IN. X 4 IN. X 6 IN. MILWAUKEE 3-FLAT SECURE-GRIP™ HAMMER-DRILL BIT 5/8 IN. X 4 IN. X 6 IN.
Online
$33.49for 4 Each
Retail $50.23
Mfr PN: 48-20-8840
Stock: 0
Milwaukee's 3-Flat Secure-Grip™ Hammer-Drill Bits provide superiority in regards to quality, performance and longevity of life. The 3-Flat Secure-Grip™ shank is designed to fit in all 1/2 in. three jaw hammer-drill chucks and reduces the possibility of the bit spinning in the chuck during heavy torsional loads. The bits drill faster and last longer than other hammer-drill bits on the market due to their reinforced flute geometry and carbide tip design. Milwaukee's offering has a range of diameters from 1/8 in. to 1 in. with lengths up to 18 in. One per package.
Online
$33.49for 4 Each
Retail $50.23
Mfr PN: 48-20-8840
Stock: 0

MILWAUKEE 3-FLAT SECURE-GRIP™ HAMMER-DRILL BIT 7 PIECE KIT MILWAUKEE 3-FLAT SECURE-GRIP™ HAMMER-DRILL BIT 7 PIECE KIT
Online
$38.28for Each
Retail $57.42
Mfr PN: 48-20-8852
Stock: 0
Milwaukee's 3-Flat Secure-Grip™ Hammer-Drill Bits provide superiority in regards to quality, performance and longevity of life. The 3-Flat Secure-Grip™ shank is designed to fit in all 1/2 in. three jaw hammer-drill chucks and reduces the possibility of the bit spinning in the chuck during heavy torsional loads. The bits drill faster and last longer than other hammer-drill bits on the market due to their reinforced flute geometry and carbide tip design. Milwaukee's offering has a range of diameters from 1/8 in. to 1 in. with lengths up to 18 in. One per package.
Online
$38.28for Each
Retail $57.42
Mfr PN: 48-20-8852
Stock: 0

MILWAUKEE 4 IN. FULL CABLE TWIST KNOT WHEEL STAINLESS STEEL MILWAUKEE 4 IN. FULL CABLE TWIST KNOT WHEEL STAINLESS STEEL
Online
$58.82for 2 Each
Retail $88.23
Mfr PN: 48-52-5020
Stock: 0
Milwaukee Hyperwire™ wire brush products offer faster material removal and greater life yet maintain a finer finish. The Full cable Twist Knot Wire Wheel is designed for general heavy duty cleaning of scale, surface oxidation, rubber flash, heavy burrs and weld splatter. Full cable Twist Knot Wire Wheels are available in carbon and stainless steel.
Online
$58.82for 2 Each
Retail $88.23
Mfr PN: 48-52-5020
Stock: 0

MILWAUKEE 4 IN. RADIAL CRIMPED WHEEL CARBON STEEL MILWAUKEE 4 IN. RADIAL CRIMPED WHEEL CARBON STEEL
Online
$47.92for 3 Each
Retail $71.88
Mfr PN: 48-52-5070
Stock: 0
Milwaukee Hyperwire™ wire brush products offer faster material removal and greater life yet maintain a finer finish. Milwaukee offers the finest quality Knot Wire Cup Brushes to give you long service on the toughest cleaning jobs. These cup brushes are ideally suited for cleaning castings, structural steel and sheet Metal. Milwaukee offers a full range of knotted and crimped cup brushes as well as a full line of Stringer Bead and Full cable Twist Wire Wheels.
Online
$47.92for 3 Each
Retail $71.88
Mfr PN: 48-52-5070
Stock: 0

MILWAUKEE 4-1/2 IN. 11 AMP SMALL ANGLE GRINDER PADDLE, NO LOCK MILWAUKEE 4-1/2 IN. 11 AMP SMALL ANGLE GRINDER PADDLE, NO LOCK
Online
$142.65for Each
Retail $213.97
Mfr PN: 6142-31
Stock: 0
|The 11 Amp 4-1/2 in Small Angle Grinder (Paddle, No-Lock) delivers up to 3X more durability and up to 50% more power than the competition | With a 1,400 MWO motor that powers through the toughest jobs, the 6147-31 is the perfect match for industrial users | Featuring a 100% tool-free design, this Grinder allows the user to change all accessories, including hubbed product, without a wrench | In addition, the tool-free, burst resistant, adjustable guard allows users to make quick guard installations and adjustments
Online
$142.65for Each
Retail $213.97
Mfr PN: 6142-31
Stock: 0

MILWAUKEE 5/8 IN. SDS ROTARY HAMMER KIT MILWAUKEE 5/8 IN. SDS ROTARY HAMMER KIT
Online
$231.84for Each
Retail $347.76
Mfr PN: 5263-21
Stock: 0
Most compact rotary hammer in its class at 10.9" long and only 4.6 lbs| Up to 30% lighter than the competition and is ideal for drilling overhead and in tight spaces, yet powerful enough to drill the majority of holes commonly drilled by the professional trades| Provides up to 65% faster drilling with 1.5ft lbs of impact energy and 0-3700 RPM| The Anti-Vibration System delivers maximum user comfort by minimizing vibration, while 2-Mode Operation provides versatility regardless of application| 5.5 Amps| Includes side handle, depth rod, and carrying case
Online
$231.84for Each
Retail $347.76
Mfr PN: 5263-21
Stock: 0

MILWAUKEE 6 IN. FULL CABLE TWIST KNOT WHEEL CARBON STEEL MILWAUKEE 6 IN. FULL CABLE TWIST KNOT WHEEL CARBON STEEL
Online
$41.04for 2 Each
Retail $61.56
Mfr PN: 48-52-1725
Stock: 0
Milwaukee Hyperwire™ wire brush products offer faster material removal and greater life yet maintain a finer finish. The Full cable Twist Knot Wire Wheel is designed for general heavy duty cleaning of scale, surface oxidation, rubber flash, heavy burrs and weld splatter. Full cable Twist Knot Wire Wheels are available in carbon and stainless steel.
Online
$41.04for 2 Each
Retail $61.56
Mfr PN: 48-52-1725
Stock: 0

MILWAUKEE 6 IN. STRINGER BEAD WHEEL CARBON STEEL MILWAUKEE 6 IN. STRINGER BEAD WHEEL CARBON STEEL
Online
$34.90for 2 Each
Retail $52.35
Mfr PN: 48-52-1715
Stock: 0
Milwaukee Hyperwire™ wire brush products offer faster material removal and greater life yet maintain a finer finish. For maximum weld cleaning in confined area, the narrow faced Stringer Bead Wheel provides aggressive action. A tight twist provides the narrow profile with the required stiffness to clean pipe joints in fabrication shops and pipeline maintenance. Stringer Bead Wheels are available in both carbon and stainless steel.
Online
$34.90for 2 Each
Retail $52.35
Mfr PN: 48-52-1715
Stock: 0

MILWAUKEE 8 PIECE SCREWDRIVER SET MILWAUKEE 8 PIECE SCREWDRIVER SET
Online
$50.93for Each
Retail $76.39
Mfr PN: 48-22-2008
Stock: 0
Featuring the Milwaukee® ECX™ Bit and hardened tips, the 8 Piece Screwdriver Set provides professional grade solutions and durability to the user. Metal caps and shock resistant tool steel prevent damage from abusive job site conditions, while integrated wire strippers and wire bending holes provide further utility for the user. Bit types are marked on the cap of each tool for quick identification and increased efficiency.
Online
$50.93for Each
Retail $76.39
Mfr PN: 48-22-2008
Stock: 0

MILWAUKEE ALL PURPOSE PROFESSIONAL ICE HARDENED™ HOLE SAW KIT 28 PIECE MILWAUKEE ALL PURPOSE PROFESSIONAL ICE HARDENED™ HOLE SAW KIT 28 PIECE
Online
$293.04for Each
Retail $439.56
Mfr PN: 49-22-4185
Stock: 0
Milwaukee® Ice Hardened™ products utilize a proprietary cryogenic hardening process that improves upon traditional heat treat processes. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft Metal (austenite) and creating more hard Metal (martensite). The result is a product that is more consistently hard throughout, resulting in life up to 50% longer than the competition.
Online
$293.04for Each
Retail $439.56
Mfr PN: 49-22-4185
Stock: 0

MILWAUKEE ARBOR ADAPTER MILWAUKEE ARBOR ADAPTER
Online
$33.84for 9 Each
Retail $50.76
Mfr PN: 49-56-6560
Stock: 0
The Milwaukee® arbor adapter can be used on any small hole saw arbor to adapt to use hole saws up to 1-1/2 in.. Use with hole saw arbor spacer 49-67-0120 for 1-1/2 in. cup.
Online
$33.84for 9 Each
Retail $50.76
Mfr PN: 49-56-6560
Stock: 0

MILWAUKEE BAND SAW BLADE COMPACT (35-3/8 IN.) 14TPI MILWAUKEE BAND SAW BLADE COMPACT (35-3/8 IN.) 14TPI
Online
$37.38for 2 Pack
Retail $56.07
Mfr PN: 48-39-0519
Stock: 0
Milwaukee Compact Portable Band Saw Blades are designed to maximize performance of Milwaukee Compact Band Saws. They will deliver long tooth life and exceptional durability in Metal-cutting applications, including strut, conduit, angle iron, copper tube, threaded rod, and pipe. Tooth form, pitch, and set have been designed to deliver straight, accurate cuts across a broad range of materials.
Online
$37.38for 2 Pack
Retail $56.07
Mfr PN: 48-39-0519
Stock: 0

MILWAUKEE BAND SAW BLADE COMPACT (35-3/8 IN.) 18 TPI MILWAUKEE BAND SAW BLADE COMPACT (35-3/8 IN.) 18 TPI
Online
$49.06for 2 Pack
Retail $73.59
Mfr PN: 48-39-0529
Stock: 0
| Designed to maximize performance of the Milwaukee Compact Band Saws | Matrix II high speed steel teeth deliver maximum durability | Alloy backing steel provides extended blade life | Precision formed teeth create fast, clean cuts | For cutting common materials 5/32"-3/16" thick and very hard materials 3/16"-5/16" thick | Blade dimension: 35-3/8" x 1/2" x 0.020", TPI/Grit: 18 TPI | Pack has 3 blades and priced PER PACK
Online
$49.06for 2 Pack
Retail $73.59
Mfr PN: 48-39-0529
Stock: 0

MILWAUKEE BELLHANGER BIT 1/4 IN. X 12 IN. MILWAUKEE BELLHANGER BIT 1/4 IN. X 12 IN.
Online
$36.72for 3 Each
Retail $55.08
Mfr PN: 48-13-7125
Stock: 0
| For Installers Of All Types Of Small Wire Systems - Computer, Security, Phone Cable, Etc | Extra Length For Extra Reach; Pull The Wire Back Through The Hole By Simply Attaching A Line Or The Wire To The Bit
Online
$36.72for 3 Each
Retail $55.08
Mfr PN: 48-13-7125
Stock: 0

MILWAUKEE BELLHANGER BIT 3/8 IN. X 18 IN. MILWAUKEE BELLHANGER BIT 3/8 IN. X 18 IN.
Online
$39.84for 4 Each
Retail $59.46
Mfr PN: 48-13-7237
Stock: 0
| For Installers Of All Types Of Small Wire Systems - Computer, Security, Phone Cable, Etc | Extra Length For Extra Reach; Pull The Wire Back Through The Hole By Simply Attaching A Line Or The Wire To The Bit
Online
$39.84for 4 Each
Retail $59.46
Mfr PN: 48-13-7237
Stock: 0

MILWAUKEE BIT 14 PIECE COBALT KIT MILWAUKEE BIT 14 PIECE COBALT KIT
Online
$64.52for Each
Retail $96.78
Mfr PN: 48-89-0026
Stock: 0
Milwaukee® Thunderbolt® Cobalt drill bits are designed for extreme durability and long life in specialty applications. The Thunderbolt® web features a thicker core than a standard drill bit, which provides ultimate strength and protects against side-load breakage. A specially designed parabolic flute form clears chips and debris fast to keep the bit cool. A precision start, 135 Split Point tip starts on contact to keep the bit from walking for fast accurate holes. Excellent for drilling on curved surfaces, requires less effort to drill and is highly recommended for use with Portable drills.
Online
$64.52for Each
Retail $96.78
Mfr PN: 48-89-0026
Stock: 0

MILWAUKEE BIT 29 PIECE TITANIUM COATED KIT MILWAUKEE BIT 29 PIECE TITANIUM COATED KIT
Online
$91.88for Each
Retail $137.82
Mfr PN: 48-89-0012
Stock: 0
Milwaukee® Thunderbolt® Titanium coated drill bits are designed for extreme durability and long life. The Thunderbolt® web features a thicker core than a standard drill bit, which provides ultimate strength and protects against side-load breakage. A specially designed parabolic flute form clears chips and debris fast to keep the bit cool. A precision start, 135 Split Point tip starts on contact to keep the bit from walking for fast accurate holes. Excellent for drilling on curved surfaces, requires less effort to drill and is highly recommended for use with Portable drills.
Online
$91.88for Each
Retail $137.82
Mfr PN: 48-89-0012
Stock: 0

MILWAUKEE BIT BELLHANGER 1/4 18L MILWAUKEE BIT BELLHANGER 1/4 18L
Online
$44.32for 3 Each
Retail $66.48
Mfr PN: 48-13-7225
Stock: 0
Milwaukee's Bellhanger bits are ideal for installing all types of small wire systems including computer, security, phone, and cable. With 12", 18" and 24" lengths they provide extra reach where needed and a hole in the tip to help pull wires through holes. Non-stick coated flutes increases chip ejection and reduces binding. An aggressive tip geometry provides faster cutting and the 3-flat shank stops the bit from slipping in the user's drill.
Online
$44.32for 3 Each
Retail $66.48
Mfr PN: 48-13-7225
Stock: 0

MILWAUKEE BIT KIT SELF FEED 3 BIT MILWAUKEE BIT KIT SELF FEED 3 BIT
Online
$74.08for Each
Retail $111.12
Mfr PN: 49-22-0030
Stock: 0
This 3 piece self feed Bit plumbers' set comes complete with the most popular sizes of self feed bits for installing common sizes of pipe. The inside cutting plane shaves the hole radius for a clean, smooth hole. Made from heat treated alloy, these bits are designed for maximum durability and wear resistance. The resharpenable cutting edge can be sharpened with a standard file. The replaceable feed screw effortlessly pulls the bit through the material and is reusable promoting longer life.
Online
$74.08for Each
Retail $111.12
Mfr PN: 49-22-0030
Stock: 0

MILWAUKEE BIT SELF FEED 1 IN. MILWAUKEE BIT SELF FEED 1 IN.
Online
$34.89for Each
Retail $52.34
Mfr PN: 48-25-1001
Stock: 0
| New self feed bit design cuts faster | Shanks have flat surface for secure check grip complete with filed screws for each bit | Removable and replaceable lead screws | Double inside cutter blades | 7/16" shank
Online
$34.89for Each
Retail $52.34
Mfr PN: 48-25-1001
Stock: 0

Don't Miss a Deal or Special Offer!
Get Email Savings and Updates:

About Us   Contact Us   Customer Service & Policies   Merchant Service   Privacy Statement   Customer Feedback  Return Policy

Copyright © 1999-2021 BuilderDepot, Inc.
Site Designed and Maintained by Inline Internet Systems, Inc.