1.25"-12 right hand thread jam nut for use on Currie CE-9114 Johnny JointsŪ with treaded shanks, or in any other application that would need a 1.25" jam nut. Silver zinc plated, sold each.
|
1.25"-12 right hand thread jam nut for use on Currie CE-9114 Johnny JointsŪ with treaded shanks, or in any other application that would need a 1.25" jam nut. Silver zinc plated, sold each.
|
1"-14 left hand thread jam nut for use on Currie CE-9113L Johnny JointsŪ with treaded shanks, or in any other application that would need a 1" jam nut. Silver zinc plated, sold each.
|
2 JOHNY JOINT FORGED END
|
2.0 JJ FORGED END X
|
2.5 JJ X 1.25 LH W/ -19
|
2.5 JJ X 1.25 RH W/ -28
|
2.5 JOHNNY JOINT NARROW
|
All new from Currie, forged Johnny JointsŪ!!! We have taken the Johnny JointŪ to the next level by making a male rod end style forging that accepts the Johnny JointŪ internals from our CE-9112 2" Johnny JointsŪ. This version features a 7/16" thru bolt hole, a 2" mounting width, 2 1/4" of 3/4"-16 right hand threads on the shank, and is greasable through the outer shell. Units will also accept our 7/16" greasable thru bolts as well (available seperately). We also keep the jam nuts for these units on hand at all times as well. These can be used in any Currie adjustable upper control arm, as well as in any type of universal application for those building their own arms. Finished in gold zinc plating, sold each.
|
All new from Currie, forged Johnny JointsŪ!!! We have taken the Johnny JointŪ to the next level by making a male rod end style forging that accepts the Johnny JointŪ internals from our CE-9112 2" Johnny JointsŪ. This version features a 7/16" thru bolt hole, a 2" mounting width, 2 1/4" of 3/4"-16 right hand threads on the shank, and is greasable through the outer shell. Units will also accept our 7/16" greasable thru bolts as well (available seperately). We also keep the jam nuts for these units on hand at all times as well. These can be used in any Currie adjustable upper control arm, as well as in any type of universal application for those building their own arms. Finished in gold zinc plating, sold each.
|
All new from Currie, forged Johnny JointsŪ!!! We have taken the Johnny JointŪ to the next level by making a male rod end style forging that accepts the Johnny JointŪ internals from our CE-9112 2" Johnny JointsŪ. This version features a 7/16" thru bolt hole, a 2" mounting width, 2 1/4" of 3/4"-16 right hand threads on the shank, and is greasable through the outer shell. Units will also accept our 7/16" greasable thru bolts as well (available seperately). We also keep the jam nuts for these units on hand at all times as well. These can be used in any Currie adjustable upper control arm, as well as in any type of universal application for those building their own arms. Finished in gold zinc plating, sold each.
|
2.5in JOHNNY JOINT
|
2.5IN JOHNNY JOINT BUSHIN
|
For fabricators and suspension system builders. Currie's Johnny JointsŪ offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny JointŪ rod ends are made with a high-density, "tough 88" urethane that encases the inner ball. It is a very durable material, and is impervious to weather. The special center ball is heat-treated steel for extra strength, cross-drilled for thru-bolt lubrication, features a 9/16" thru bolt hole, and a 2 5/8" mounting width. The outer shell is .180" DOM tubing, and the retaining washers are heat-treated steel. 9/16" greasable bolt with nut and washers included. Sold each.
|
For fabricators and suspension system builders. Currie's Johnny JointsŪ offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny JointŪ rod ends are made with a high-density, "tough 88" urethane that encases the inner ball. It is a very durable material, and is impervious to weather. The special center ball is heat-treated steel for extra strength, cross-drilled for thru-bolt lubrication, features a 9/16" thru bolt hole, and a 2 5/8" mounting width. The outer shell is .180" DOM tubing, and the retaining washers are heat-treated steel. 9/16" greasable bolt with nut and washers included. Sold each.
|
These Machined ?Jonny Joints are designed for the custom fabricator that is making their own suspension components.
|
Currie Enterprises Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. Johnny Joint rod ends are made with a high density polyurethane bushing that encases a spherical ball and include a zerk for easy lubrication.
|
For fabricators and suspension system builders. Currie's Johnny JointsŪ offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny JointŪ rod ends are made with a high-density, "tough 88" urethane that encases the inner ball. It is a very durable material, and is impervious to weather. The special center ball is heat-treated steel for extra strength, cross-drilled for thru-bolt lubrication, features a 9/16" thru bolt hole, and a 2 5/8" mounting width. The outer shell is .180" DOM tubing, and the retaining washers are heat-treated steel. 9/16" greasable bolt with nut and washers included. Sold each.
|
All new from Currie, forged Johnny JointsŪ!!! We have taken the Johnny JointŪ to the next level by making a male rod end style forging that accepts the Johnny JointŪ internals from our CE-9112 2" Johnny JointsŪ. This version features a 7/16" thru bolt hole, a 2" mounting width, 2 1/4" of 3/4"-16 right hand threads on the shank, and is greasable through the outer shell. Units will also accept our 7/16" greasable thru bolts as well (available seperately). We also keep the jam nuts for these units on hand at all times as well. These can be used in any Currie adjustable upper control arm, as well as in any type of universal application for those building their own arms. Finished in gold zinc plating, sold each.
|
All new from Currie, forged Johnny JointsŪ!!! We have taken the Johnny JointŪ to the next level by making a male rod end style forging that accepts the Johnny JointŪ internals from our CE-9112 2" Johnny JointsŪ. This version features a 7/16" thru bolt hole, a 2" mounting width, 2 1/4" of 3/4"-16 right hand threads on the shank, and is greasable through the outer shell. Units will also accept our 7/16" greasable thru bolts as well (available seperately). We also keep the jam nuts for these units on hand at all times as well. These can be used in any Currie adjustable upper control arm, as well as in any type of universal application for those building their own arms. Finished in gold zinc plating, sold each.
|
2INCH JOHNNY JOINT
|
4IN SUSPENSION SYSTEM
|
7/16 GREASABLE BOLT W/
|
9/16" fine thread bolt used in 2 1/2" Johnny JointsŪ. Includes greasable bolt with zerk fitting installed in it's head, 2 flat washers, and crush nut.
|
ADJUSTABLE COIL OVER
|
ANTIROCK ALUM. ARM
|
ANTIROCK KIT ALUM ARMS
|
ANTIROCK UNIVERSAL KIT
|
ANTIROCK UNIVERSAL KIT
|
The Currie AntirockŪ Sway Bar provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight over all four tires. The AntirockŪ Off-Road sway bar is designed to replace the stock Jeep sway bar or available in univerasal applications for the do-it-yourself fabricator. Made of SAE 4130 Heat-treated steel for ultimate strength. This is the same quality used in professional off-road competition. This kit includes all components, bushing, hardware and step by step instructions.
|
BOLT - 9/16 X 4.50
|
|
|
|
|
Copyright © 1999-2022 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |