CHECK OUT OUR CLEARANCE ITEMS! HUGE SAVINGS!Click Here

 
 
  1. Home:
  2. showbrand
 

Shop by Brand: RockJock 4x4

Items 1- 32 of 111 total

THREADED TUBE INSERT THREADED TUBE INSERT
Online
$22.00for EA
Mfr PN: CE-9114BLR
Stock: 2
Custom machined, left hand thread, weld-in bung for use with forged Johnny Joint rod ends or any other 1 1/4" thread rod end. Designed to fit into a tube with a 1 1/2" i.d. Sold each.
Online
$22.00for EA
Mfr PN: CE-9114BLR
Stock: 2

THREADED TUBE INSERT - 1I THREADED TUBE INSERT - 1I
Online
$32.00for EA
Mfr PN: CE-9113B
Stock: 13
Custom machined, right hand thread, weld-in bung for use with forged Johnny Joint rod ends or any other 1" thread rod end. Hex shaped - not round - for ease of bar adjustment. Also included with this bung is a custom machined jam nut that is the same hex size as the bung. Designed to fit into a tube with a 1 1/4" i.d. Sold each.
Online
$32.00for EA
Mfr PN: CE-9113B
Stock: 13

THREADED TUBE INSERT - 1I THREADED TUBE INSERT - 1I
Online
$32.00for EA
Mfr PN: CE-9113BL
Stock: 6
Custom machined, left hand thread, weld-in bung for use with forged Johnny Joint rod ends or any other 1" thread rod end. Hex shaped - not round - for ease of bar adjustment. Also included with this bung is a custom machined jam nut that is the same hex size as the bung. Designed to fit into a tube with a 1 1/4" i.d. Sold each.
Online
$32.00for EA
Mfr PN: CE-9113BL
Stock: 6

THREADED TUBE INSERT - LH THREADED TUBE INSERT - LH
Online
$39.00for EA
Mfr PN: CE-9114BL
Stock: 9
Custom machined, left hand thread, weld-in bung for use with forged Johnny Joint rod ends or any other 1 1/4" thread rod end. Hex shaped - not round - for ease of bar adjustment. Also included with this bung is a custom machined jam nut that is the same hex size as the bung. Designed to fit into a tube with a 1 1/2" i.d. Sold each.
Online
$39.00for EA
Mfr PN: CE-9114BL
Stock: 9

THREADED TUBE INSERT - RH THREADED TUBE INSERT - RH
Online
$39.00for EA
Mfr PN: CE-9114B
Stock: 0
Custom machined, right hand thread, weld-in bung for use with forged Johnny Joint rod ends or any other 1 1/4" thread rod end. Hex shaped - not round - for ease of bar adjustment. Also included with this bung is a custom machined jam nut that is the same hex size as the bung. Designed to fit into a tube with a 1 1/2" i.d. Sold each.
Online
$39.00for EA
Mfr PN: CE-9114B
Stock: 0

TJ ANTIROCK FRNT SWAY BAR TJ ANTIROCK FRNT SWAY BAR
Online
$519.00for EA
Mfr PN: CE-9900
Stock: 2
The Currie Antirock Sway Bar Kit provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight over all four tires. The Anitrock Off Road Sway Bar is designed to replace the stock Jeep sway bar. The Sway Bar is made of SAE 4130 Heat-treated steel for ultimate strength. This is the same quality used in professional off-road competition. This kit includes all components, bushings, hardware and step-by-step instructions. It is positioned through the front cross member and attaches to the stock mounts on the axle housing on Jeep TJ's. The Currie Antirock Sway Bar does not need to be disconnected for off-road use. CAUTION: Jeeps will have more body roll than stock. This Sway Bar may be used on the street however, it will not provide the same performance as the stock setup. Fits 1997 to 2006 TJ Wrangler, Rubicon and Unlimited SAE 4130 heat treated steel Includes all necessary components Bushings and hardware included Step by step installation instructions
Online
$519.00for EA
Mfr PN: CE-9900
Stock: 2

TJ ANTIROCK FRONT SB W/ TJ ANTIROCK FRONT SB W/
Online
$620.00for EA
Mfr PN: CE-9900A
Stock: 1
The Currie Enterprises Antirock« Sway Bar Kit with aluminum arm option provides balanced performance of front and rear suspension for rugged off-road conditions as well as a light weight, trick looking aluminum arms. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock« Off Road Sway Bar is designed to directly replace the stock Jeep sway bar and is an easy bolt on installation. The sway bar is made of SAE 4130 Heat-treated steel for ultimate strength. This is the same quality used in professional off-road competition sway bars. The Currie Enterprises Antirock« Sway Bar does not need to be disconnected for off-road use. CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street however, it will not provide the same performance as the stock setup. Fits 1997 to 2006 TJ Wrangler, Rubicon and Unlimited Front sway bar Light weight aluminum arms Increases traction and balance SAE 4130 heat treated steel
Online
$620.00for EA
Mfr PN: CE-9900A
Stock: 1

TJ REAR LOWER JJ ARMS TJ REAR LOWER JJ ARMS
Online
$466.00for EA
Mfr PN: CE-9106
Stock: 0
TJ REAR LOWER JJ ARMS
Online
$466.00for EA
Mfr PN: CE-9106
Stock: 0

TJ/XJ DRAG LINK ONLY TJ/XJ DRAG LINK ONLY
Online
$204.00for EA
Mfr PN: CE-9701DLO
Stock: 0
This is the 1-1/4" forged alloy steel drag link only out of the Currie Currectlync® heavy duty tie rod kit. This unit features an oversized 1 1/8" threaded adjuster, giant clamps, and threaded ball joint end at the pitman arm end, and it provides up to 200% more strength than the original equipment drag link. This unit will only work as a replacement part for the Currie system - it may not be used as in conjunction with any stock tie rod parts. This unit is rated at 200% stronger than the stock part.
Online
$204.00for EA
Mfr PN: CE-9701DLO
Stock: 0

TJ/XJ DRAG LINK ROD END TJ/XJ DRAG LINK ROD END
Online
$98.40for EA
Mfr PN: CE-9701DLR
Stock: 0
Left hand thread drag link end for Currie's Currectlync® heavy duty tie rod set is designed with 1 1/8" thread for added strength. Grease fitting provides for increased performance and long life. Includes boot, castle nut, and cotter pin. Sold each.
Online
$98.40for EA
Mfr PN: CE-9701DLR
Stock: 0

TJ/XJ H.D. MOTOR MOUNTS TJ/XJ H.D. MOTOR MOUNTS
Online
$139.00for EA
Mfr PN: CE-9201
Stock: 0
TJ/XJ H.D. MOTOR MOUNTS
Online
$139.00for EA
Mfr PN: CE-9201
Stock: 0

TJ/XJ HEAVY STEERING KIT TJ/XJ HEAVY STEERING KIT
Online
$691.00for EA
Mfr PN: CE-9701
Stock: 5
The Currie Currectlync« heavy duty tie rod and drag link system for TJ, LJ, XJ, and MJ vehicles features, a 1 ╝" diameter forged alloy drag link, and 1 ╝" solid alloy steel tie rod bar that is bored and threaded on the ends. All 7/8" thread tie rod ends with boots are included as well as the Currie heavy duty steering stabilizer bracket. This unit is a direct replacement for the stock parts. No modifications or machining to any part of the vehicle is necessary. This unit is rated at 200% stronger than the stock components. NOTE: This unit is designed to be used on vehicles with 4" of lift. It can be used on vehicles with less lift, but the vehicle must have a minimum of a 2" bump stop (over stock). Also, on vehicles with no lift, 2 of the tie rod ends may need be trimmed to achieve proper adjustment. Fits 1997 to 2006 TJ Wrangler, Rubicon and Unlimited Fits 1984 to 2001 XJ Cherokee Fits 1986 to 1992 MJ Comanche 1-1/4" chromemoly 1-1/8" threaded drag link adjuster and giant clamps 7/8" threaded tie rod ends
Online
$691.00for EA
Mfr PN: CE-9701
Stock: 5

TJ/XJ STEERING STABILIZER TJ/XJ STEERING STABILIZER
Online
$51.60for EA
Mfr PN: CE-9701SB
Stock: 0
This is an oversized steering stabilizer bracket designed to be used on the Currie Currectlync® heavy duty tie rod system, but it may also be used in other universal applications that use 1 1/4" rods. Includes the bracket plate, the two 3/8"-24 thread u-bolts, lock washers and nuts. Sold as a kit.
Online
$51.60for EA
Mfr PN: CE-9701SB
Stock: 0

TJ/XJ TIE ROD END - LH TJ/XJ TIE ROD END - LH
Online
$98.40for EA
Mfr PN: CE-9701TRL
Stock: 2
Left hand tie rod end for Currie's Currectlync® heavy duty tie rod set is designed with 7/8 thread for added strength. Grease fitting provides for increased performance and long life. Includes boot, castle nut, and cotter pin. Sold each.
Online
$98.40for EA
Mfr PN: CE-9701TRL
Stock: 2

YJ REAR BOOMERANG SHACKLE YJ REAR BOOMERANG SHACKLE
Online
$127.00for EA
Mfr PN: CE-9081
Stock: 0
Currie Enterprises boomerang shackles increase rear spring travel by allowing the back eye of the spring to articulate around behind the back end of the frame rail. They feature 1/4" thick steel side plates, Energy Suspension "Tough 88" fluted urethane bushings, and heavy duty greasable bolts that feature zerk fittings on their heads for greasing of the bushings. Finished in corrosion proof gold zinc, these also have bolt-in center braces for added rigidity. Sold as a pair.
Online
$127.00for EA
Mfr PN: CE-9081
Stock: 0

Don't Miss a Deal or Special Offer!
Get Email Savings and Updates:

About Us   Contact Us   Customer Service & Policies   Merchant Service   Privacy Statement   Customer Feedback  Return Policy

Copyright © 1999-2022 BuilderDepot, Inc.
Site Designed and Maintained by Inline Internet Systems, Inc.