CHECK OUT OUR CLEARANCE ITEMS! HUGE SAVINGS!Click Here

 
 
  1. Home:
  2. showbrand
 

Shop by Brand: Artec Industries

Items 1- 32 of 184 total

Online
$508.36for EA
Mfr PN: RM6009
Stock: 4

Online
$520.93for EA
Mfr PN: SK1404
Stock: 0

Online
$609.61for EA
Mfr PN: TJ6073
Stock: 0

TJ 1.25 BODY MOUNT SPACER KIT FOR USE WITH TJ2010 TJ 1.25 BODY MOUNT SPACER KIT FOR USE WITH TJ2010
Online
$79.22for EA
Mfr PN: TJ2025
Stock: 0
The perfect compliment to our TJ Boatside Body Mounts, these CNC machined Aluminum Spacers allow you to get a 1.25" body lift on the radiator and the four rear most body mounts if you do not already have a pre-existing body lift kit.
Online
$79.22for EA
Mfr PN: TJ2025
Stock: 0

Online
$67.22for EA
Mfr PN: TJ8805
Stock: 0

Online
$42.40for EA
Mfr PN: TJ8804
Stock: 5

Online
$41.36for EA
Mfr PN: TJ8802
Stock: 0

TJ 8.8 SWAP KIT WITH TRUSS TJ 8.8 SWAP KIT WITH TRUSS
Online
$520.18for EA
Mfr PN: TR8801
Stock: 0
This heavy duty truss and bracket system is designed to take serious abuse and reinforce your entire axle while also providing the factory link, anti-sway bar, and shock locations. The 1/4" thick truss top incorporates a unique design to strengthen both the axle and incorporate the link brackets for ease of installation and added strength. By incorporating the link mounts into the truss, hours of work and trial and error can be avoided when compared to other bracket systems. Simply tack weld the truss together, place it on the axle and all the other brackets fit into place exactly where they need to be. The Ford Explorer 8.8 features: same lug nut bolt pattern as Dana 35, 3-1/4" diameter tubes as compared to 2.625" Dana 35, disc brakes (1995 & newer), 31 spline axle shafts, 8.8" diameter ring gear which 120% stronger than Dana 35, only 20 pounds more than Dana 35, and a trac-loc differential stock. When swapping, the 3.73 gear ratio may need to be changed to match your Jeep gears and wheel spacers may be necessary to bring the width back to factory specs since the 8.8 is 1.25" narrower than the Dana 35. Please note this requires welding and general fabrication. Some grinding and fitment may be required when installing this kit. Every axle varies slightly and some fabrication may be required. Will require brake line relocation to fit.
Online
$520.18for EA
Mfr PN: TR8801
Stock: 0

TJ BOATSIDE BODY MOUNTS - 1.25 INCH LIFT TJ BOATSIDE BODY MOUNTS - 1.25 INCH LIFT
Online
$310.34for EA
Mfr PN: TJ2010
Stock: 0
Artec's Boatside Body Mounts are designed to allow TJ and LJ owners to get rid of the clunky and weak body mounts that often either catch on obstacles or just plain rot off the frame. The under side of the body mount is completely boxed in and even angled to provide a skid plate which allows for less chance of the vehicle getting hung up on the mount. Plus since we incorporate the typical body lift that is installed on these Wranglers into the mount instead of relying on taller bushing, the whole mount is raised up and out of the way.
Online
$310.34for EA
Mfr PN: TJ2010
Stock: 0

TJ BOATSIDE BODY MOUNTS - OEM HEIGHT TJ BOATSIDE BODY MOUNTS - OEM HEIGHT
Online
$289.65for EA
Mfr PN: TJ2014
Stock: 0
Artec Industries Boatside Body Mounts are designed to allow TJ and LJ owners to get rid of the clunky and weak body mounts that often either catch on obstacles or just plain rot off the frame. The under side of the body mount is completely boxed in and even angled to provide a skid plate which allows for less chance of the vehicle getting hung up on the mount. These boatside body mounts will take you new places your factory mounts never could. Simply use normal OEM height bushings with this kit. The bushings are inserted from the back side above the frame which means the underside of the boatside doesn't need as large of a hole, giving you better clearances and less material to get hung up on.
Online
$289.65for EA
Mfr PN: TJ2014
Stock: 0

TJ FRAME SIDE TRACKBAR MOUNT - 2.5 IN - 3.5 IN STRETCH TJ FRAME SIDE TRACKBAR MOUNT - 2.5 IN - 3.5 IN STRETCH
Online
$72.40for EA
Mfr PN: TJ2001
Stock: 0
This heavy-duty track bar mount will replace your factory mount and allow for a 2.5" - 3.5" Stretch forward of the factory position. Perfect for use with our TJ 1 Ton Axle Swap for added clearance.
Online
$72.40for EA
Mfr PN: TJ2001
Stock: 0

TJ FRONT FRAME COIL BUCKETS FOR OEM BUMPSTOPS TJ FRONT FRAME COIL BUCKETS FOR OEM BUMPSTOPS
Online
$331.04for EA
Mfr PN: TJ2002
Stock: 0
Do you have rusty, busted or abused factory front coil buckets on your TJ or LJ? Or are you looking to change to a coil suspension on your YJ or other leaf sprung vehicle? Or do you want to customize your suspension? These Heavy Duty TJ Front Frame side Coil Buckets are a great replacement for your OEM coil buckets. They will also allow you build your suspension the way you want, not limiting you to how the factory intended.
Online
$331.04for EA
Mfr PN: TJ2002
Stock: 0

TJ REAR COIL CORRECTION KIT TJ REAR COIL CORRECTION KIT
Online
$165.52for EA
Mfr PN: TJ2015
Stock: 0
Artec's new TJ Rear Coil Correction Kit fixes a common problem on lifted Jeeps...bowing springs. The OEM spring perches were set at an angle which is great for no lift but once you start to lift your vehicle, the angles change resulting in bowing spring that can be permenantly damaged an even unseated during articulation. Their correction kit eliminated the factory angle allowing any lift height with no bowing. They even add provisions if you want to do a 1 inch stretch.
Online
$165.52for EA
Mfr PN: TJ2015
Stock: 0

TJ/YJ BACK HALF FRAME KIT TJ/YJ BACK HALF FRAME KIT
Online
$437.42for EA
Mfr PN: FK0002
Stock: 0
Our Back Half Frame Kit is designed to allow TJ, LJ, and YJ owners to get rid of the clunky back half of their stock frame to allow clearance for coilovers and/or larger heavy duty axles. By narrowing the frame, you are able to run coilovers without notching your factory frame and weakening it. Plus since it doesn't hang as low as the factory frame in the back, you can do a stretch with that one-ton axle and have better up-travel. This DIY kit includes only the transition pieces because we know you can get straight pieces of 2"x3" tube locally, so why make you pay for that AND shipping for it. But these aren't just some generic pieces of steel that make the transition. This kit has been specifically designed to compliment the factory frame, yet look distinctly hardcore. It is also engineered for maximum strength and easy assembly with jig and key holes so you can't put it together wrong. Just another example of the FUSION OF FORM AND FUNCTION from Artec.
Online
$437.42for EA
Mfr PN: FK0002
Stock: 0

TOYOTA 4RUNNER 5G A-ARM SKIDS TOYOTA 4RUNNER 5G A-ARM SKIDS
Online
$390.13for EA
Mfr PN: TY6805
Stock: 0
Toyota 4Runner 5th Gen A-Arm Skids. Heavy Duty yet Light weight protection for your vulnerable lower A-arms
Online
$390.13for EA
Mfr PN: TY6805
Stock: 0

Online
$354.66for EA
Mfr PN: TY9001
Stock: 0

Online
$1028.56for EA
Mfr PN: TY7002
Stock: 0

Online
$898.50for EA
Mfr PN: TY9003
Stock: 1

Online
$27.77for EA
Mfr PN: BR1044S
Stock: 0

TUBE ARMOR: 48 IN TUBE ARMOR: 48 IN
Online
$47.28for EA
Mfr PN: GU4021
Stock: 0
Want to beef up a section of tubing, whether it's lower links, tie rod, sliders or a section of cage, without adding a lot of weight? Artec Tube Armor is the answer. A 30 inch section only adds about 2 lbs to your tube. Contrast that to using a full length of thicker tube and you not only save weight but money since thicker tubing is significantly higher. Plus it generally means easier packaging than thicker tube since you don't have to worry about the added girth. This tube reinforcement is a great way to add protection exactly where it's needed.
Online
$47.28for EA
Mfr PN: GU4021
Stock: 0

Online
$41.37for EA
Mfr PN: BR1073
Stock: 0

UCA BRACKETS FOR TJ TRUSS (PAIR) UCA BRACKETS FOR TJ TRUSS (PAIR)
Online
$27.26for EA
Mfr PN: TJ3002-1
Stock: 0
1/4" mild steel. Precision CNC cut for great fitment.Laser etched part numbers for easy installation.Designed using CAD files for a precision fit and alignment for upper control arms.
Online
$27.26for EA
Mfr PN: TJ3002-1
Stock: 0

WIDE 3/4 HIGH MISALIGNMENT SPACERS SS (PAIR) 9/16 INCH WIDE 3/4 HIGH MISALIGNMENT SPACERS SS (PAIR) 9/16 INCH
Online
$23.33for EA
Mfr PN: SP1203
Stock: 0
These spacers are great for using any heim that has a 3/4" bore and installing in a location that has a bracket width of 2.625" that is commonly found in many stock parts. Using this spacer also enables you to keep your 2.625" brackets if you decide to upgrade to a larger joint in the future, rather than cutting off the brackets and welding on new ones. A much better option than using two sets of spacers which allows for multiple shear points. Made from 303 stainless steel and offered in pairs.
Online
$23.33for EA
Mfr PN: SP1203
Stock: 0

ZJ 8.8 SWAP KIT WITH TRUSS FOR GRAND CHEROKEE (93-98) ZJ 8.8 SWAP KIT WITH TRUSS FOR GRAND CHEROKEE (93-98)
Online
$673.88for EA
Mfr PN: TR8802
Stock: 0
This heavy duty truss and bracket system is designed to take serious abuse and reinforce your entire axle while also providing the factory link, anti-sway bar, and shock locations. The 1/4" thick truss top incorporates a unique design to strengthen both the axle and incorporate the link brackets for ease of installation and added strength. By incorporating the link mounts into the truss, hours of work and trial and error can be avoided when compared to other bracket systems. Simply tack weld the truss together, place it on the axle and all the other brackets fit into place exactly where they need to be. The Ford Explorer 8.8 features: same lug nut bolt pattern as Dana 35, 3-1/4" diameter tubes as compared to 2.625" Dana 35, disc brakes (1995 & newer), 31 spline axle shafts, 8.8" diameter ring gear which 120% stronger than Dana 35, only 20 pounds more than Dana 35, and a trac-loc differential stock. When swapping, the 3.73 gear ratio may need to be changed to match your Jeep gears and wheel spacers may be necessary to bring the width back to factory specs since the 8.8 is 1.25" narrower than the Dana 35. Please note this requires welding and general fabrication. Some grinding and fitment may be required when installing this kit. Every axle varies slightly and some fabrication may be required. Will require brake line relocation to fit.
Online
$673.88for EA
Mfr PN: TR8802
Stock: 0

Don't Miss a Deal or Special Offer!
Get Email Savings and Updates:

About Us   Contact Us   Customer Service & Policies   Merchant Service   Privacy Statement   Customer Feedback  Return Policy

Copyright © 1999-2022 BuilderDepot, Inc.
Site Designed and Maintained by Inline Internet Systems, Inc.