CHECK OUT OUR CLEARANCE ITEMS! HUGE SAVINGS!Click Here

 
 
  1. Home:
  2. showbrand
 

Shop by Brand: Artec Industries

Items 1- 32 of 184 total

DANA 60 REAR TRUSS DANA 60 REAR TRUSS
Online
$461.06for EA
Mfr PN: TR6060
Stock: 0
This heavy duty truss system is designed to take serious abuse and reinforce your entire axle while also providing a flat surface to mount your upper links. The 3/8" thick truss top and 1/4" thick gussets incorporates a unique design to strengthen both the axle and the link mounting surface. Also fits Dana 70U with minor trimming. This kit requires general welding and fabrication skills.
Online
$461.06for EA
Mfr PN: TR6060
Stock: 0

DANA 80 REAR TRUSS DANA 80 REAR TRUSS
Online
$496.54for EA
Mfr PN: TR8001
Stock: 0
Artec Industries is excite to announce the NEW Dana 80 Rear Axle Truss. This heavy duty truss system is designed to take serious abuse and reinforce your entire axle while also providing a flat surface to mount your upper links. The 3/8" thick truss top and 1/4" thick gussets incorporates a unique design to strengthen both the axle and the link mounting surface. This truss allows for a selection of pinion angles from 7 to 20 degrees. Any more or less and some trimming may be required. This truss fits Dana 80 axles with a centered differential. If your axle is not centered, contact us for custom fitment. Overall length on this truss is about 53 inches. NOTE: This truss is very form fitting to the contours of the casting. Due to variances in casting of this axle over the years, some trimming may be necessary on the truss and non-essential parts of the casting.
Online
$496.54for EA
Mfr PN: TR8001
Stock: 0

DIY RAM MOUNT DIY RAM MOUNT
Online
$437.42for EA
Mfr PN: RM6007
Stock: 0
Online
$437.42for EA
Mfr PN: RM6007
Stock: 0

DODGE DANA 60 FRONT TRUSS DODGE DANA 60 FRONT TRUSS
Online
$425.60for EA
Mfr PN: TR6022
Stock: 0
This heavy duty truss system is designed to take serious abuse and reinforce your entire axle while also providing a flat surface to mount your upper links. The 3/8" thick truss top and 1/4" thick gussets incorporates a unique design to strengthen both the axle and the link mounting surface. This kit requires general welding and fabrication skills.
Online
$425.60for EA
Mfr PN: TR6022
Stock: 0

DUAL 3-LINK BRACKETS (PAIR) DUAL 3-LINK BRACKETS (PAIR)
Online
$283.73for EA
Mfr PN: BR1071
Stock: 0
Online
$283.73for EA
Mfr PN: BR1071
Stock: 0

DUAL 4-LINK BRACKET (PAIR) DUAL 4-LINK BRACKET (PAIR)
Online
$295.56for EA
Mfr PN: BR1013
Stock: 0
With Artec Industries brackets, we want to introduce a better looking product that has that custom one-off look and solve some of the issues that have plagued some of the generic brackets on the market, thus making them function better. Some common features that you'll see among our new brackets are: better access to grease fittings, bottom protection of the joint on lower link brackets, designs that make the bracket look like it was designed to be there from the beginning rather than just a piece of metal slapped on later, etc. Here are some of the highlights for this particular bracket that set it apart from all the others. •2.625" mounting width with 9/16" bolt hole for common sized Cartridge Joints (Johnny, Flex, Ballistic, etc). Can be drilled out to larger hole size for 1.25" rod ends with spacers. Can be easily modified for smaller joints •Made from 1/4" thick boxed steel plate for strength and impact resistance. •Grease fitting access on top to allow easy maintenance of your most abused joint. •Skid plate of bottom of bracket wraps around joint protecting it from direct impact and decreases premature wear on the joint. This leads to longer life and less replacements. Skid plate design does not restrict movement of joint. •The style of the bracket gives a unique, custom one-off look you'd get with a high dollar fabrication shop. No more brackets that look like modified pieces of angle iron or c-channel, but rather formed pieces of artwork to show off.
Online
$295.56for EA
Mfr PN: BR1013
Stock: 0

FLAT SHOCK TAB (PAIR) - LONG FLAT SHOCK TAB (PAIR) - LONG
Online
$19.41for EA
Mfr PN: TB1017
Stock: 0
Online
$19.41for EA
Mfr PN: TB1017
Stock: 0

FLAT SHOCK TAB (PAIR) - MEDIUM FLAT SHOCK TAB (PAIR) - MEDIUM
Online
$18.42for EA
Mfr PN: TB1018
Stock: 0
Online
$18.42for EA
Mfr PN: TB1018
Stock: 0

FORD 78-79 DANA 60 FRONT TRUSS FORD 78-79 DANA 60 FRONT TRUSS
Online
$401.96for EA
Mfr PN: TR6031
Stock: 0
Online
$401.96for EA
Mfr PN: TR6031
Stock: 0

FORD 85-91.5 DANA 60 FRONT TRUSS FORD 85-91.5 DANA 60 FRONT TRUSS
Online
$425.60for EA
Mfr PN: TR6033
Stock: 0
This heavy duty truss system is designed to take serious abuse and reinforce your entire axle while also providing a flat surface to mount your upper links. The 3/8" thick truss top and 1/4" thick gussets incorporates a unique design to strengthen both the axle and the link mounting surface. This kit requires general welding and fabrication skills.
Online
$425.60for EA
Mfr PN: TR6033
Stock: 0

Online
$171.41for EA
Mfr PN: TR0905
Stock: 0

Online
$271.90for EA
Mfr PN: TR0902
Stock: 0

Online
$271.90for EA
Mfr PN: TR6005
Stock: 0

Online
$279.32for EA
Mfr PN: HS6151
Stock: 0

FULL HYDRO WELD-ON HIGH STEER ARMS - 99-04 SUPERDUTY FULL HYDRO WELD-ON HIGH STEER ARMS - 99-04 SUPERDUTY
Online
$279.32for EA
Mfr PN: HS6153
Stock: 0
Affordable weld on arms for the 99-04 SuperDuty Knuckles to help eliminate those swap steering issues.
Online
$279.32for EA
Mfr PN: HS6153
Stock: 0

Online
$96.41for EA
Mfr PN: OP3501
Stock: 0

GROUP 34 OPTIMA BATTERY MOUNT GROUP 34 OPTIMA BATTERY MOUNT
Online
$88.66for EA
Mfr PN: OP3401
Stock: 0
Online
$88.66for EA
Mfr PN: OP3401
Stock: 0

Online
$105.29for EA
Mfr PN: OP3407
Stock: 0

Online
$88.66for EA
Mfr PN: OP5101
Stock: 0

HIGH CLEARANCE SHOCK BRACKETS (PAIR) HIGH CLEARANCE SHOCK BRACKETS (PAIR)
Online
$70.92for EA
Mfr PN: BR1049
Stock: 5
This heavy bracket is designed to take serious abuse and replace your worn shock brackets. This bracket requires welding to install.
Online
$70.92for EA
Mfr PN: BR1049
Stock: 5

INNER FRAME BRACKET (SINGLE) 0 DEGREE FRONT DRIVER (REAR PASSENGER) INNER FRAME BRACKET (SINGLE) 0 DEGREE FRONT DRIVER (REAR PASSENGER)
Online
$70.92for EA
Mfr PN: BR1014
Stock: 0
With Artec Industries brackets, we want to introduce a better looking product that has that custom one-off look and solve some of the issues that have plagued some of the generic brackets on the market, thus making them function better. Some common features that you'll see among our new brackets are: better access to grease fittings, bottom protection of the joint on lower link brackets, designs that make the bracket look like it was designed to be there from the beginning rather than just a piece of metal slapped on later, etc. Here are some of the highlights for this particular bracket that set it apart from all the others. •2.625" mounting width with 9/16" bolt hole for common sized Cartridge Joints (Johnny, Flex, Ballistic, etc). Can be drilled out to larger hole size for 1.25" rod ends with spacers. •Made from 1/4" thick boxed steel plate for strength and impact resistance. •Grease fitting access on top to allow easy maintenance of your most abused joint. Design allows joint to be mounted grease fitting up. Other companies' frame brackets mount the grease fitting down, resulting in a broken fitting on the very impact. •Skid plate of bottom of bracket wraps around joint protecting it from direct impact and decreases premature wear on the joint. This leads to longer life and less replacements. Skid plate design does not restrict movement of joint. •Tapered sides allow bracket to be mounted at an angle on the frame without excess bracket hanging off the side. Not only does it look better and more natural to the frame, but it also means you have less bracket sliding on the rocks and getting in the way. •The style of the bracket gives a unique, custom one-off look you'd get with a high dollar fabrication shop. No more brackets that look like modified pieces of angle iron or c-channel, but rather formed pieces of artwork to show off. Universal application Front driver or rear passenger Made from 1/4 thick boxed steel 9/16" bolt hole Skid plate for joint Sold individually 0 degree angle Bare steel
Online
$70.92for EA
Mfr PN: BR1014
Stock: 0

Online
$70.92for EA
Mfr PN: BR1016
Stock: 0

INNER FRAME BRACKET (SINGLE) 10 DEGREE FRONT PASSENGER (REAR DRIVER) INNER FRAME BRACKET (SINGLE) 10 DEGREE FRONT PASSENGER (REAR DRIVER)
Online
$70.92for EA
Mfr PN: BR1017
Stock: 0
With Artec Industries brackets, we want to introduce a better looking product that has that custom one-off look and solve some of the issues that have plagued some of the generic brackets on the market, thus making them function better. Some common features that you'll see among our new brackets are: better access to grease fittings, bottom protection of the joint on lower link brackets, designs that make the bracket look like it was designed to be there from the beginning rather than just a piece of metal slapped on later, etc. Here are some of the highlights for this particular bracket that set it apart from all the others. •2.625" mounting width with 9/16" bolt hole for common sized Cartridge Joints (Johnny, Flex, Ballistic, etc). Can be drilled out to larger hole size for 1.25" rod ends with spacers. •Made from 1/4" thick boxed steel plate for strength and impact resistance. •Grease fitting access on top to allow easy maintenance of your most abused joint. Design allows joint to be mounted grease fitting up. Other companies' frame brackets mount the grease fitting down, resulting in a broken fitting on the very impact. •Skid plate of bottom of bracket wraps around joint protecting it from direct impact and decreases premature wear on the joint. This leads to longer life and less replacements. Skid plate design does not restrict movement of joint. •Tapered sides allow bracket to be mounted at an angle on the frame without excess bracket hanging off the side. Not only does it look better and more natural to the frame, but it also means you have less bracket sliding on the rocks and getting in the way. •The style of the bracket gives a unique, custom one-off look you'd get with a high dollar fabrication shop. No more brackets that look like modified pieces of angle iron or c-channel, but rather formed pieces of artwork to show off.
Online
$70.92for EA
Mfr PN: BR1017
Stock: 0

INNER FRAME BRACKET (SINGLE) 25 DEGREE FRONT DRIVER (REAR PASSENGER) INNER FRAME BRACKET (SINGLE) 25 DEGREE FRONT DRIVER (REAR PASSENGER)
Online
$66.20for EA
Mfr PN: BR1018
Stock: 0
With Artec Industries brackets, we want to introduce a better looking product that has that custom one-off look and solve some of the issues that have plagued some of the generic brackets on the market, thus making them function better. Some common features that you'll see among our new brackets are: better access to grease fittings, bottom protection of the joint on lower link brackets, designs that make the bracket look like it was designed to be there from the beginning rather than just a piece of metal slapped on later, etc. Here are some of the highlights for this particular bracket that set it apart from all the others. 2.625" mounting width with 9/16" bolt hole for common sized Cartridge Joints (Johnny, Flex, Ballistic, etc). Can be drilled out to larger hole size for 1.25" rod ends with spacers. Made from 1/4" thick boxed steel plate for strength and impact resistance. Grease fitting access on top to allow easy maintenance of your most abused joint. Design allows joint to be mounted grease fitting up. Other companies' frame brackets mount the grease fitting down, resulting in a broken fitting on the very impact. Skid plate of bottom of bracket wraps around joint protecting it from direct impact and decreases premature wear on the joint. This leads to longer life and less replacements. Skid plate design does not restrict movement of joint. Tapered sides allow bracket to be mounted at an angle on the frame without excess bracket hanging off the side. Not only does it look better and more natural to the frame, but it also means you have less bracket sliding on the rocks and getting in the way. The style of the bracket gives a unique, custom one-off look you'd get with a high dollar fabrication shop. No more brackets that look like modified pieces of angle iron or c-channel, but rather formed pieces of artwork to show off.
Online
$66.20for EA
Mfr PN: BR1018
Stock: 0

INNER FRAME BRACKET (SINGLE) 25 DEGREE FRONT PASSENGER (REAR DRIVER) INNER FRAME BRACKET (SINGLE) 25 DEGREE FRONT PASSENGER (REAR DRIVER)
Online
$65.01for EA
Mfr PN: BR1019
Stock: 0
With Artec Industries brackets, we want to introduce a better looking product that has that custom one-off look and solve some of the issues that have plagued some of the generic brackets on the market, thus making them function better. Some common features that you'll see among our new brackets are: better access to grease fittings, bottom protection of the joint on lower link brackets, designs that make the bracket look like it was designed to be there from the beginning rather than just a piece of metal slapped on later, etc. Here are some of the highlights for this particular bracket that set it apart from all the others. •2.625" mounting width with 9/16" bolt hole for common sized Cartridge Joints (Johnny, Flex, Ballistic, etc). Can be drilled out to larger hole size for 1.25" rod ends with spacers. •Made from 1/4" thick boxed steel plate for strength and impact resistance. •Grease fitting access on top to allow easy maintenance of your most abused joint. Design allows joint to be mounted grease fitting up. Other companies' frame brackets mount the grease fitting down, resulting in a broken fitting on the very impact. •Skid plate of bottom of bracket wraps around joint protecting it from direct impact and decreases premature wear on the joint. This leads to longer life and less replacements. Skid plate design does not restrict movement of joint. •Tapered sides allow bracket to be mounted at an angle on the frame without excess bracket hanging off the side. Not only does it look better and more natural to the frame, but it also means you have less bracket sliding on the rocks and getting in the way. •The style of the bracket gives a unique, custom one-off look you'd get with a high dollar fabrication shop. No more brackets that look like modified pieces of angle iron or c-channel, but rather formed pieces of artwork to show off.
Online
$65.01for EA
Mfr PN: BR1019
Stock: 0

Online
$11.72for EA
Mfr PN: HW2013
Stock: 0

Online
$11.72for EA
Mfr PN: HW2012
Stock: 0

Online
$55.41for EA
Mfr PN: BB1403
Stock: 0

Online
$47.56for EA
Mfr PN: BB1051
Stock: 0

Online
$47.56for EA
Mfr PN: BB1053
Stock: 0

Online
$682.78for EA
Mfr PN: SK1405
Stock: 0

Online
$341.38for EA
Mfr PN: JK4455
Stock: 1

Don't Miss a Deal or Special Offer!
Get Email Savings and Updates:

About Us   Contact Us   Customer Service & Policies   Merchant Service   Privacy Statement   Customer Feedback  Return Policy

Copyright © 1999-2022 BuilderDepot, Inc.
Site Designed and Maintained by Inline Internet Systems, Inc.