Dropped pitman arms are necessary in many of our kits, to correct steering geometry after the installation of a suspension system. We manufacture our pitman arms to be stronger then stock units, using the latest forging and CNC machining technology.
|
|
Not just a replacement tie rod end but an heavy duty upgrade. Fabtech has sourced these heavy duty tie rod ends to improve the steering strength and service life of your vehicle.
|
Uniball Upper Control Arms are designed for severe duty use with stock and most aftermarket suspension systems. Fabtech Uniball Upper Control Arms directly replace the factory upper control arms for use on stock, aftermarket or Fabtech'suspensions providing additional strength and reliability to the vehicle. Replaces upper ball joints with 1in FK Stainless PTFE Uniballs. Heavy duty upgrade for stock and aftermarket suspensions. No modification to spindle required for installation. Includes Arms, Uniballs, Pins & Misalignments. .120in Wall 4130 Chromoly. 1.25in OD
|
|
Not just a replacement tie rod end but an heavy duty upgrade. Fabtech has sourced these heavy duty tie rod ends to improve the steering strength and service life of your vehicle.
|
Fabtech's Performance Steering Stabilizers utilize the same construction as their Performance Shocks and are designed to work precisely in conjunction with Fabtech Suspension Systems. Reduce bump steer and wheel shimmy that sometimes occurs when running oversized, aftermarket wheels and tires. The easy fit, heavy duty bracketry allows for a quick and easy installation. Available in single and double configurations, check your application for availability.
|
|
This heavy duty double cardian front driveshaft has been designed to work in conjunction with our 8in HD suspension systems. This specialty driveshaft has been built to provide vibration free driveline operation in 4WD high at highway speeds. FOR USE WITH 8in SYSTEMS ONLY.
|
Fabtech's Chevy GMC C1500 3.5" Spindle Lift increases the height of the vehicle, provides more front end ground clearance, and an OEM like ride with clearance for 33'' tires. The spindles are designed as a direct replacement for the factory spindle and utilizes stock ball joints. Rear lift is accomplished with a 1"block & u-bolt kit.
|
Not just a replacement tie rod end but an heavy duty upgrade. Fabtech has sourced these heavy duty tie rod ends to improve the steering strength and service life of your vehicle.
|
|
|
|
|
|
|
Dropped pitman arms are necessary in many of our kits, to correct steering geometry after the installation of a suspension system. We manufacture our pitman arms to be stronger then stock units, using the latest forging and CNC machining technology. Pitman Arm
|
|
|
When you lift your JK Wrangler over 2.5" you'll need this to avoid the exhaust hitting the drive shaft.
|
|
|
|
|
Heavy Duty Construction. 1/4” Thick steel with high grade hardware. Aircraft grade billet aluminum. Powdercoated for maximum corrosion resistance. Properly engineered to eliminate ball joint, tie rod and steering bind. 5 Year 60,000 Mile Powertrain Warranty. Works with AutoRide/Non AutoRide & MagnaRide/Non MagnaRide vehicles. Use 285/70R17 tires w/ 17x9 wheels w/ 5 1/2” BS w/ minor trimming. Use 295/65R18 tires w/ 18x9 wheels w/ 5 1/2” BS w/ minor trimming. Use 305/55R20 tires w/ 20x9 wheels w/ 5 1/2” BS w/ minor trimming. Use 305/45R22 tires w/ 22x9 wheels w/ 5 1/2” BS w/ minor trimming.
|
|
Fabtech Leveling Kits provide a small amount of lift for the front of the vehicle. This will typically help to level the stance of the vehicle's ride height front to rear as compared to the nose down appearance from the factory. With the added ride height it allows for the installation of larger tires and wheels for a more aggressive look. The installation of the kit is typically very simple and can be done with basic hand tools. There is no modification of the vehicle required for installation and can be returned back to stock if needed. All Fabtech Leveling Kits have undergone extensive engineering to properly function without placing the ball joints and tie rods into bind. This is an important feature as some taller kits on the market create bind and can result in failure of those parts over time. Fabtech offers an exclusive Trade Up program on all their Leveling Kits. If you ever want to step up to a complete 4'' or 6'' Fabtech'suspension system after you buy a Leveling Kit, you can trade in the previously purchased kit towards the price of a new Fabtech'system. Please see program details. All Fabtech Leveling Kits come with a free 5 year 60,000 mile Powertrain warranty. Please see program details.
|
|
|
|
|
|
|
|
Copyright © 1999-2022 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |