CHECK OUT OUR CLEARANCE ITEMS! HUGE SAVINGS!Click Here

 
 
  1. Home:
  2. showbrand
 

Shop by Brand: Viair Corporation

1.5 GALLON TANK AIR SOURCE KIT (25% DUTY COMPRESSOR, 12V) 1.5 GALLON TANK AIR SOURCE KIT (25% DUTY COMPRESSOR, 12V)
Online
$301.41for EA
Mfr PN: 20003
Stock: 25
P/N 20003 Air Source Kits come with a 275C VIAIR compressor mounted on a 1.5 gallon air tank with a pre-wired 90/120 PSI pressure switch wired! All that’s left to do is connect the pressure switch to fused power, make a solid ground and connect an air line to the existing compression fitting on the air tank. Air Source Kits provide an all-in-one air source solution.
Online
$301.41for EA
Mfr PN: 20003
Stock: 25

100C COMPRESSOR KIT (15% DUTY, SEALED) 100C COMPRESSOR KIT (15% DUTY, SEALED)
Online
$158.61for EA
Mfr PN: 10010
Stock: 1
100C comes with a 1.5 ft. stainless steel braided leader hose with 1/4” NPT swivel male fitting hose end and rubber isolated mounting feet as well as insulated electric terminals. VIAIR “C” model compressors are intended to fill air tanks. They are not equipped with an ON/OFF switch or pressure sensitive shutoff device of any kind. The use of a pressure switch and relay are recommended and required. All “C” model VIAIR compressors are equipped with a stainless steel braided leader hose and a check valve to keep the compressor from restarting under pressure which can create an amp draw spike and can cause motor damage. Most VIAIR compressors are equipped with a thermal overload protector that will shut down the unit when overheated. When cool, the compressor will automatically restart as normal.
Online
$158.61for EA
Mfr PN: 10010
Stock: 1

2.0 GALLON TANK (SIX 1/4IN NPT PORTS, 150 PSI RATED) 2.0 GALLON TANK (SIX 1/4IN NPT PORTS, 150 PSI RATED)
Online
$98.54for EA
Mfr PN: 91022
Stock: 25
Dimensions: 19.00""L x 6.00""W x 7.50""H, Six 1/8"" NPT Ports Dimensions: 19" L x 6" W x 7.5" H Six 1/4"" NPT Ports 150 PSI Rated
Online
$98.54for EA
Mfr PN: 91022
Stock: 25

2.0 GALLON TANK AIR SOURCE KIT (30% DUTY COMPRESSOR, 12V) 2.0 GALLON TANK AIR SOURCE KIT (30% DUTY COMPRESSOR, 12V)
Online
$339.94for EA
Mfr PN: 20005
Stock: 25
P/N 20005 Air Source Kits come with a 280C VIAIR compressor mounted on a 2 gallon air tank with a pre-wired 110/145 PSI pressure switch wired! All that’s left to do is connect the pressure switch to fused power, make a solid ground and connect an air line to the existing compression fitting on the air tank. Air Source Kits provide an all-in-one air source solution.
Online
$339.94for EA
Mfr PN: 20005
Stock: 25

2.5 GALLON AIR TANK (SIX 1/4IN NPT PORTS, 150 PSI RATED) 2.5 GALLON AIR TANK (SIX 1/4IN NPT PORTS, 150 PSI RATED)
Online
$105.68for EA
Mfr PN: 91025
Stock: 25
This compact 2-1/2 gallon air tank is rated at 150 PSI, is continuously welded, and internally and externally coated for corrosion resistance. With six 1/4 NPT female ports, the tank can be mounted in many different positions. 24 long x 6 diameter. Silver finish. Hardware included. Tank is rated at 150 PSI With six 1/4" NPT female ports 24" long x 6" diameter
Online
$105.68for EA
Mfr PN: 91025
Stock: 25

2.5 GALLON AIR TANK (SIX 1/4IN NPT PORTS, 200 PSI RATED) 2.5 GALLON AIR TANK (SIX 1/4IN NPT PORTS, 200 PSI RATED)
Online
$112.14for EA
Mfr PN: 91028
Stock: 25
All Viair tanks are SAE J10 certified and rated to either 150 or 200 PSI maximum working pressure and equipped with either 1/4'' or 3/8" NPT ports in various configurations. All air tanks are coated to resist rusting and oxidation.Max Pressure: 200 PSISix 1/4" NPT PortsDimensions: 23.5" L x 6" W x 7.5" HRust Resistant CoatingMounting Hardware Included
Online
$112.14for EA
Mfr PN: 91028
Stock: 25

24IN BY 3/8IN S.S. LEADER HOSE W/CHECK VALVE (3/8IN M TO 3/8IN M, NPT, SWIVEL) 24IN BY 3/8IN S.S. LEADER HOSE W/CHECK VALVE (3/8IN M TO 3/8IN M, NPT, SWIVEL)
Online
$39.94for EA
Mfr PN: 92791
Stock: 6
Leader hoses allow hot air from compressors to cool while being delivered to a tire or air tank. Hoses with check valves help to protect the head of the compressor from damaging high pressure starting. Length: 24" 3/8" Male NPT to 3/8" Male NPT Swivel Check valve
Online
$39.94for EA
Mfr PN: 92791
Stock: 6

275C COMPRESSOR KIT (25% DUTY, SEALED) 275C COMPRESSOR KIT (25% DUTY, SEALED)
Online
$262.08for EA
Mfr PN: 27520
Stock: 3
275C features include a standard 1/4” stainless steel braided leader hose with inline check valve and insulated wiring for simple installation. VIAIR “C” model compressors are intended to fill air tanks. They are not equipped with an ON/OFF switch or pressure sensitive shutoff device of any kind. The use of a pressure switch and relay are recommended and required. All “C” model VIAIR compressors are equipped with a stainless steel braided leader hose and a check valve to keep the compressor from restarting under pressure which can create an amp draw spike and can cause motor damage. Most VIAIR compressors are equipped with a thermal overload protector that will shut down the unit when overheated. When cool, the compressor will automatically restart as normal
Online
$262.08for EA
Mfr PN: 27520
Stock: 3

280C COMPRESSOR KIT (12V, CE 30% DUTY, SEALED) 280C COMPRESSOR KIT (12V, CE 30% DUTY, SEALED)
Online
$274.21for EA
Mfr PN: 28021
Stock: 2
The 280C is rated to 150 PSI maximum working pressure. Features include a standard 1/4 stainless steel braided leader hose with inline check valve and insulated wiring for simple installation.
Online
$274.21for EA
Mfr PN: 28021
Stock: 2

Online
$48.68for EA
Mfr PN: 00031
Stock: 0

Online
$305.94for EA
Mfr PN: 30032
Stock: 8

325C 24V COMPRESSOR KIT (33% DUTY, SEALED) 325C 24V COMPRESSOR KIT (33% DUTY, SEALED)
Online
$307.70for EA
Mfr PN: 32538
Stock: 0
325C 24V are compressors that work with low amp draw. Features include a standard 1/4” stainless steel braided leader hose with check valve and insulated wiring for simple installation.VIAIR “C” model compressors are intended to fill air tanks. They are not equipped with an ON/OFF switch or pressure sensitive shutoff device of any kind. The use of a pressure switch and relay are recommended and required. All “C” model VIAIR compressors are equipped with a stainless steel braided leader hose and a check valve to keep the compressor from restarting under pressure which can create an amp draw spike and can cause motor damage. Most VIAIR compressors are equipped with a thermal overload protector that will shut down the unit when overheated. When cool, the compressor will automatically restart as normal.
Online
$307.70for EA
Mfr PN: 32538
Stock: 0

325C COMPRESSOR KIT (33% DUTY, SEALED) 325C COMPRESSOR KIT (33% DUTY, SEALED)
Online
$294.61for EA
Mfr PN: 32530
Stock: 0
325C 12V are compressors that work with low amp draw. Features include a standard 1/4” stainless steel braided leader hose with check valve and insulated wiring for simple installation.VIAIR “C” model compressors are intended to fill air tanks. They are not equipped with an ON/OFF switch or pressure sensitive shutoff device of any kind. The use of a pressure switch and relay are recommended and required. All “C” model VIAIR compressors are equipped with a stainless steel braided leader hose and a check valve to keep the compressor from restarting under pressure which can create an amp draw spike and can cause motor damage. Most VIAIR compressors are equipped with a thermal overload protector that will shut down the unit when overheated. When cool, the compressor will automatically restart as normal.
Online
$294.61for EA
Mfr PN: 32530
Stock: 0

Online
$431.74for EA
Mfr PN: 33035
Stock: 1

350C COMPRESSOR KIT (100% DUTY, SEALED) 350C COMPRESSOR KIT (100% DUTY, SEALED)
Online
$309.34for EA
Mfr PN: 35030
Stock: 0
350C operate using low amp draw so they’re versatile for many mobile pneumatic applications. Features include a standard 1/4” stainless steel braided leader hose with inline check valve and insulated wiring for simple installation. VIAIR “C” model compressors are intended to fill air tanks. They are not equipped with an ON/OFF switch or pressure sensitive shutoff device of any kind. The use of a pressure switch and relay are recommended and required. All “C” model VIAIR compressors are equipped with a stainless steel braided leader hose and a check valve to keep the compressor from restarting under pressure which can create an amp draw spike and can cause motor damage. Most VIAIR compressors are equipped with a thermal overload protector that will shut down the unit when overheated. When cool, the compressor will automatically restart as normal.
Online
$309.34for EA
Mfr PN: 35030
Stock: 0

36IN S.S. BRAIDED LEADER HOSE W/ CHECK VALVE (1/4IN M TO 1/4IN M, NPT, SWIVEL) 36IN S.S. BRAIDED LEADER HOSE W/ CHECK VALVE (1/4IN M TO 1/4IN M, NPT, SWIVEL)
Online
$39.38for EA
Mfr PN: 92805
Stock: 0
To compliment their high quaklity compressors Viair has a full line of Stainless stell braided leader hoses to suit your needs. Not only do these hoses look good but the also protect you hoses offoring longer service life.
Online
$39.38for EA
Mfr PN: 92805
Stock: 0

Online
$317.28for EA
Mfr PN: 38033
Stock: 18

40 AMP RELAY (40A -24V) 40 AMP RELAY (40A -24V)
Online
$8.20for EA
Mfr PN: 93943
Stock: 0
Online
$8.20for EA
Mfr PN: 93943
Stock: 0

400C COMPRESSOR KIT (33% DUTY, SEALED) 400C COMPRESSOR KIT (33% DUTY, SEALED)
Online
$317.28for EA
Mfr PN: 40040
Stock: 3
These high performance compressors are designed to handle heavy duty mobile air applications with an impressive150 PSI working pressure. Sealed for moisture and dust resistance, the 450C has a continuous 100% duty cycle rating while the 400C is a 33% duty cycle compressor. Impressive150 PSI working pressure Sealed for moisture and dust resistance
Online
$317.28for EA
Mfr PN: 40040
Stock: 3

400H HARDMOUNT COMPRESSOR KIT (12V, 33% DUTY, SEALED) 400H HARDMOUNT COMPRESSOR KIT (12V, 33% DUTY, SEALED)
Online
$469.37for EA
Mfr PN: 40041
Stock: 1
Using a 33% (Heavy Duty) duty cycle 400C compressor, tire inflation or air locker actuation is made possible in a very compact space. Each ADA System comes complete with an onboard pressure switch, automatic coupler and a Digital Tire Inflation Kit. Additionally, a wiring harness is included to make the installation a plug & play process, with very little install time required. ADA systems in model specific applications for 2007-2011 & 2012 Jeep JK are equipped with a brake booster mounting bracket. Included Parts - 400C Compressor - Extruded Aluminum Air Tank (12-port) - Toggle Switch - Air Line for Remote Mount Air Filter Installation - (2) Remote Mount Air Filter Relocation Fittings - 1/8" NPT Drain Cock - 1/4" NPT Safety Valve - (8) 1/4" NPT Hex Plug - 1/4" NPT Sealed Pressure Switch (85/105 PSI) - (2) 1/4" NPT BSP Adapter - 1/4" NPT Automatic Coupler - Brake Booster Mounting Bracket Digital Tire Inflation Kit: - 30' Inflation Hose with Automatic Couplers - Digital Tire Inflation Gun Wiring Harness: - 30-amp Delphi Connector Set - 60-amp Fuse Holder - 40-amp Fuse - (2) 1/4" Ring Terminal - 5/16" Ring Terminal - (3) Female Spade Terminal Connector Specifications - 12-Volt - Permanent Magnetic Motor - Duty Cycle: 33% @ 100 PSI - Max. Working Pressure: 150 PSI - Max. Amp Draw: 26 Amps
Online
$469.37for EA
Mfr PN: 40041
Stock: 1

400P PORTABLE COMPRSSR KIT (33% DUTY, 150 PSI WORKING PRESSURE, 40 MIN. @ 30 PSI 400P PORTABLE COMPRSSR KIT (33% DUTY, 150 PSI WORKING PRESSURE, 40 MIN. @ 30 PSI
Online
$247.86for EA
Mfr PN: 40043
Stock: 25
For tires up to 35 inchesPowerful portable compressor150 PSI / 2.30 CFMComes with vibration-resistant diamond-plate sand tray, 3 inflation tips, 5-in-1 inflator/deflator air hose, inline 100 PSI gauge, deluxe carry bag, 40-amp inline fuse holder, and dual battery clampsConnects to your vehicle battery, then connects to valve stem, and turns onMonitor tire pressure with 100 PSI inline gauge12 VPermanent magnet motorMaximum 12V amp draw: 30 ampsMaximum 24V amp draw: 15 ampsDuty cycle: 33% @ 100 PSIIngress protection rating: IP54Power cord length: 8 feetAir hose length: 25 feetDimensions: 10.87 x 5.83 x 7.48 inchesWeight: 10.4 pounds
Online
$247.86for EA
Mfr PN: 40043
Stock: 25

400P-A AUTOMATIC PORTABLE COMPRESSOR KIT (33% DUTY, 40 MIN. @ 30 PSI, SEALED) 400P-A AUTOMATIC PORTABLE COMPRESSOR KIT (33% DUTY, 40 MIN. @ 30 PSI, SEALED)
Online
$339.94for EA
Mfr PN: 40045
Stock: 25
Automatic 12 volt air compressor with 150 PSI maximum pressure lets you keep the machine running between fills2.3 CFM free flow at 0 PSICar battery powered with alligator clamps (engine must be running)Ideal for 35 inch tires on off road recreation and agricultural vehiclesComes with carry bag, 25 foot air hose, and inflation gunCompressor can be operated up to 40 minutes at a timeVoltage: 12 voltsPermanent magnetic motorMaximum duty cycle: 33 percent at 100 PSIMaximum working pressure: 150 PSIMaximum amp draw: 30 ampsCFM at 0 PSI: 2.54Built in pressure switch: 120 PSI on, 145 PSI offFuse: 40 ampsAutomatic reset thermal protectionIncludes: 1, 400P portable air compressor, 1 carry bag, 1 inflation gun with pressure gauge, 1, 25 foot hose, 1 sand tray, 1 set of dual battery clamps, 1, 8 foot power cable, 1 inflation tips kit, and 1 fuse holderDimensions: 11.25 x 4 x 7 inchesWeight: 8.5 poundsManufacturer warranty: 1-year warranty
Online
$339.94for EA
Mfr PN: 40045
Stock: 25

400P-RV AUTOMATIC PORTABLE COMPRESSOR KIT (12V, CE, 33% DUTY, 40 MIN. @ 30 PSI) 400P-RV AUTOMATIC PORTABLE COMPRESSOR KIT (12V, CE, 33% DUTY, 40 MIN. @ 30 PSI)
Online
$419.28for EA
Mfr PN: 40047
Stock: 12
Automatic 12 volt air compressor with 150 PSI maximum pressure lets you keep the machine running between fills2.3 CFM free flow at 0 PSICar battery powered with alligator clamps (engine must be running)Ideal for 35 inch tires on RVs and trailers (or other vehicles)Comes with carry bag, 30 foot air hose, and inflation gun and gauge, pressure switch, and RV accessoriesCompressor can be operated up to 40 minutes at a timeVoltage: 12 voltsPermanent magnetic motorMaximum duty cycle: 33 percent at 100 PSIMaximum working pressure: 150 PSIMaximum amp draw: 30 ampsCFM at 0 PSI: 2.30Built in pressure switch: 120 PSI on, 145 PSI offFuse: 40 ampsAutomatic reset thermal protectionIncludes: 1, 400P RV portable air compressor, 1 carry bag, 1 inflation gun with pressure gauge, 1, 30 foot hose, 1, 30 foot extension hose, 1 sand tray, 1 set of dual battery clamps, 1, 8 foot power cable, 1 inflation tips kit, and 1 fuse holderDimensions: 10.87 x 5.83 x 7.48 inchesWeight: 10.75 poundsManufacturer warranty: 1-year warranty
Online
$419.28for EA
Mfr PN: 40047
Stock: 12

420C CHROME COMPRESSOR KIT, 3/8IN PORT (33% DUTY, SEALED) 420C CHROME COMPRESSOR KIT, 3/8IN PORT (33% DUTY, SEALED)
Online
$381.88for EA
Mfr PN: 42042
Stock: 3
420C Chrome features include horizontal cooling fins and a trapezoidal head design, a standard 3/8” stainless steel braided leader hose with inline check valve and insulated wiring for simple installation.VIAIR “C” model compressors are intended to fill air tanks. They are not equipped with an ON/OFF switch or pressure sensitive shutoff device of any kind. The use of a pressure switch and relay are recommended and required. All “C” model VIAIR compressors are equipped with a stainless steel braided leader hose and a check valve to keep the compressor from restarting under pressure which can create an amp draw spike and can cause motor damage. Most VIAIR compressors are equipped with a thermal overload protector that will shut down the unit when overheated. When cool, the compressor will automatically restart as normal.
Online
$381.88for EA
Mfr PN: 42042
Stock: 3

440P PORTABLE COMPRESSOR KIT (33% DUTY, 150 PSI WORKING PRESSURE, 30 MIN. @ 30 P 440P PORTABLE COMPRESSOR KIT (33% DUTY, 150 PSI WORKING PRESSURE, 30 MIN. @ 30 P
Online
$386.41for EA
Mfr PN: 44043
Stock: 9
Portable air compressor kit ideal for vehicle tires up to 37 inchesVibration-resistant diamond-plate sand tray5-in-1 air hose with inline 120 PSI gauge50-amp inline fuse holder3 piece inflation tips to fill various itemsDual battery clampsIncludes deluxe dual compartment carry bagVoltage: 12 voltsHorsepower: 0.25Permanent magnetic motorDuty cycle: 33 percent at 100 PSIMax pressure: 150 PSIMax amp draw: 44 ampsPower cord length: 8-footAir hose length: 25-footDimensions: 10.87 x 5.83 x 6.54 inchesWeight: 12.65 pounds
Online
$386.41for EA
Mfr PN: 44043
Stock: 9

450C IG SERIES COMPRESSOR KIT (12V, CE, INTERCOOLER HEAD, 100% DUTY, SEALED) 450C IG SERIES COMPRESSOR KIT (12V, CE, INTERCOOLER HEAD, 100% DUTY, SEALED)
Online
$490.68for EA
Mfr PN: 45050
Stock: 5
450C IG Series 12V features include a separate 1/4” stainless steel braided leader PTFE-lined hose and separate check valve. Industrial Grade (IG) compressors are specifically designed to fill air reservoir tanks and feature a specialized head assembly that includes a newly-developed, patents pending intercooler for higher heat dissipation. All IG compressors are certified CE spec. and feature outstanding sealing properties to the elements. Additionally, all IG compressors are equipped with stainless steel braided PTFE-lined leader hoses and a separate check valve assembly that serves to protect the compressor by eliminating the possibility of high amperage restarts. IG compressors require the use of a pressure switch that allows operation up to each compressor’s maximum working pressure as well as a relay for installation.
Online
$490.68for EA
Mfr PN: 45050
Stock: 5

450C IG SERIES COMPRESSOR KIT (24V, CE, INTERCOOLER HEAD, 100% DUTY, SEALED) 450C IG SERIES COMPRESSOR KIT (24V, CE, INTERCOOLER HEAD, 100% DUTY, SEALED)
Online
$498.61for EA
Mfr PN: 45058
Stock: 0
450C IG Series 24V features include a separate 1/4” stainless steel braided leader PTFE-lined hose and separate check valve. Industrial Grade (IG) compressors are specifically designed to fill air reservoir tanks and feature a specialized head assembly that includes a newly-developed, patents pending intercooler for higher heat dissipation. All IG compressors are certified CE spec. and feature outstanding sealing properties to the elements. Additionally, all IG compressors are equipped with stainless steel braided PTFE-lined leader hoses and a separate check valve assembly that serves to protect the compressor by eliminating the possibility of high amperage restarts. IG compressors require the use of a pressure switch that allows operation up to each compressor’s maximum working pressure as well as a relay for installation.
Online
$498.61for EA
Mfr PN: 45058
Stock: 0

450H HARDMOUNT AUTOMATIC COMPRESSOR KIT (12V, 100% DUTY, SEALED) 450H HARDMOUNT AUTOMATIC COMPRESSOR KIT (12V, 100% DUTY, SEALED)
Online
$499.52for EA
Mfr PN: 45041
Stock: 3
Using a 100% (Constant Duty) duty cycle 450C compressor, tire inflation or air locker actuation is made possible in a very compact space. Each ADA System comes complete with an onboard pressure switch, automatic coupler and a Digital Tire Inflation Kit. Additionally, a wiring harness is included to make the installation a plug & play process, with very little install time required. ADA systems in model specific applications for 2007-2011 & 2012 Jeep JK are equipped with a brake booster mounting bracket. Included Parts - 450C Compressor - Extruded Aluminum Air Tank (12-port) - Toggle Switch - Air Line for Remote Mount Air Filter Installation - (2) Remote Mount Air Filter Relocation Fittings - 1/8" NPT Drain Cock - 1/4" NPT Safety Valve - (8) 1/4" NPT Hex Plug - 1/4" NPT Sealed Pressure Switch (85/105 PSI) - (2) 1/4" NPT BSP Adapter - 1/4" NPT Automatic Coupler - Brake Booster Mounting Bracket Digital Tire Inflation Kit: - 30' Inflation Hose with Automatic Couplers - Digital Tire Inflation Gun Wiring Harness: - 30-amp Delphi Connector Set - 60-amp Fuse Holder - 40-amp Fuse - (2) 1/4" Ring Terminal - 5/16" Ring Terminal - (3) Female Spade Terminal Connector Specifications - 12-Volt - Permanent Magnetic Motor - Duty Cycle: 100% @ 100 PSI - Max. Working Pressure: 150 PSI - Max. Amp Draw: 19 Amps
Online
$499.52for EA
Mfr PN: 45041
Stock: 3

450H HARDMOUNT COMPRESSOR KIT (100% DUTY, SEALED) 450H HARDMOUNT COMPRESSOR KIT (100% DUTY, SEALED)
Online
$366.01for EA
Mfr PN: 45042
Stock: 5
450H is a continuous duty, hardmount compressor intended to directly fill tires or other items using a coil hose (not included). The 450H comes with a built-in, moisture resistant ON/OFF power switch. Features include a heavy duty stainless steel leader hose with a 1/4” quick connect stud for hookup to a coil hose and insulated wiring for simple installation. The function of a VIAIR “H” model compressor is to fill tires with the use of an air line and an open-end air chuck such as P/N 00025, 00027 & 00029. Please note, all air chucks used with “H” model compressors must be an “open-ended” type that allow air to pass through them freely. A close-ended air chuck will hold air back, which will damage the compressor and will cause the air line to rupture, which can cause injury. All “H” model compressors come with an onboard ON/OFF switch and are equipped with a stainless steel braided leader hose with an open-end quick connect stud installed at the end of the hose. This type of compressor does not come with a check valve, since it is NOT intended to fill air tanks. All “H” model compressors must be installed using the appropriate gauge wiring for the distance from the intended power source and must be properly fused to protect the unit and the vehicle it is installed inside of. All VIAIR compressors are equipped with a thermal overload protector that will shut down the unit when overheated. When cool, the compressor will automatically restart as normal.
Online
$366.01for EA
Mfr PN: 45042
Stock: 5

450P-A AUTOMATIC PORTABLE COMPRESSOR KIT (100% DUTY, 150 PSI WORKING PRESSURE) 450P-A AUTOMATIC PORTABLE COMPRESSOR KIT (100% DUTY, 150 PSI WORKING PRESSURE)
Online
$396.61for EA
Mfr PN: 45043
Stock: 25
Automatic 12-volt air compressor with 150 PSI maximum pressure lets you keep the machine running between fills1.8 CFM free flow at 0 PSICar battery powered with alligator clamps (engine must be running)Ideal for 42-inch tires on off-road recreation and agricultural vehiclesComes with carry bag, 30-foot air hose, and inflation gunCompressor can be operated up to 40 minutes at a timeVoltage: 12 voltsPermanent magnetic motorMaximum duty cycle: 100 percent at 100 PSIMaximum working pressure: 150 PSIMaximum amp draw: 30 ampsCFM at 0 PSI: 1.66Built-in pressure switch: 120 PSI on, 145 PSI offFuse: 40 ampsAutomatic reset thermal protectionIncludes: 1, 450P portable air compressor, 1 carry bag, 1 inflation gun with pressure gauge, 1, 30-foot hose, 1 sand tray, 1 set of dual battery clamps, 1, 8-foot power cable, 1 inflation tips kit, and 1 fuse holderDimensions: 10.87 x 5.8 x 7.48 inchesWeight: 13.05 pounds
Online
$396.61for EA
Mfr PN: 45043
Stock: 25

480C 200 PSI CHROME COMPRESSOR KIT, 3/8IN PORT (12V, 100% DUTY @ 100 PSI, 50% DU 480C 200 PSI CHROME COMPRESSOR KIT, 3/8IN PORT (12V, 100% DUTY @ 100 PSI, 50% DU
Online
$417.01for EA
Mfr PN: 48043
Stock: 4
480C is a truly rated, 200 PSI-rated compressor. It features horizontal cooling fins and a trapezoidal head design, a standard 3/8 stainless steel braided leader hose with 3/8 NPT inline check valve and insulated wiring. se thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque is 12 to 15 ft. lbs
Online
$417.01for EA
Mfr PN: 48043
Stock: 4

480C DUAL CHROME VALUE PACK 480C DUAL CHROME VALUE PACK
Online
$513.34for EA
Mfr PN: 48032
Stock: 1
Online
$513.34for EA
Mfr PN: 48032
Stock: 1

Don't Miss a Deal or Special Offer!
Get Email Savings and Updates:

About Us   Contact Us   Customer Service & Policies   Merchant Service   Privacy Statement   Customer Feedback  Return Policy

Copyright © 1999-2022 BuilderDepot, Inc.
Site Designed and Maintained by Inline Internet Systems, Inc.